Ti–TiN hardmetals prepared by in situ formation of TiN during reactive ball milling of Ti in ammonia
Source abstract
Abstract
Abstract Vapour deposition of titanium nitride on WC/Co or hard ferrous-based cutting tips generally results in significant increases in cutting tool life. However, a major limitation of such nitrided tips is that they cannot be resharpened for re-use. Although monolithic TiN may be too brittle for cutting tool applications, with appropriate microstructural design, Ti–TiN composites should have the required combinations of toughness, ductility, hardness, wear resistance and thermal conductivity to replace coated tips for a range of machining applications. We report the synthesis of monolithic Ti–TiN composites from nanostructural precursor powders. Reactive ball milling of Ti in nitrogen or ammonia under controlled conditions eventually results in the formation of nanostructural TiN. Furthermore, by ending the reaction after an appropriate period a homogeneous and uniform mixture of Ti and TiN phases can easily be produced. Due to the highly reactive, nanostructural nature of the powder product this synthesis route has the potential to eliminate wetting problems generally associated with the current technology of conventional liquid-phase sintering. Moreover, by controlling nitriding gas pressure changes during milling good control of both the Ti to TiN ratio and final crystallite size distributions can be achieved. It was found that precursor Ti–TiN nanostructural powders synthesised in this way can be successfully compacted and liquid phase sintered without sintering aids. Such compacts show high densities and nanoindentation hardnesses in the range of 18–23 GPa. Structural characterization was performed using X-ray analysis, transmission and scanning electron microscopy as well as optical microscopy. The mechanical properties were characterised using micro- and macroindentation techniques.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Shibuya · J. Mater. Sci. · 1998 · 33 · 257310.1023/A:1004349118014 ↗
2. Calka · Appl. Phys Lett. · 1991 · 59 · 156810.1063/1.106285 ↗
3. El-Eskandarany · Metall. Mater. Trans. A · 1998 · 29A · 197310.1007/s11661-998-0023-3 ↗
4. Calka · Mater. Sci. Eng. A · 1991 · 134 · 135010.1016/0921-5093(91)90989-Z ↗
5. Calka · Appl. Phys. Lett. · 1991 · 58 · 11910.1063/1.104974 ↗
6. Calka · Scr. Met. Mater. · 1992 · 27 · 185310.1016/0956-716X(92)90032-A ↗
7. Wexler · Mater. Sci. Forum · 1998 · 269–272 · 21910.4028/www.scientific.net/MSF.269-272.219 ↗
8. Rabe · Nanostructured Mater. · 1995 · 6 · 35710.1016/0965-9773(95)00070-4 ↗
9. Chen · Mater. Sci. Eng. A · 1994 · A187 · 5110.1016/0921-5093(94)90330-1 ↗
10. Andrievski · 1996 · Vol. 11 · 357
11. Feige · 1969 · 359
12. Frommeyer · Z. Metallkd. · 1990 · 81 · 756