journal article·2010-03

Mullite fibres preparation by aqueous sol–gel process and activation energy of mullitization

Hongbin Tan, Yaping Ding, Jianfeng Yang

Journal of Alloys and Compounds· Volume 492· Issue 1-2
Publisher page

Abstract

Abstract Mullite fibres were prepared by sol–gel process using aluminum carboxylates (ACs) and silica sol. ACs was synthesized from dissolving aluminum powder in a mixture of formic acid and oxalic acid using aluminum chloride hexahydrate as catalyst. A molar ratio of 1:2:1 for aluminum, formic acid and oxalic acid was optimized to obtain clear solution and viscous ACs sol for fibres synthesis. Thermogravimetry-differential scanning calorimetry (TG-DSC), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM) analysis were used to characterize the properties of the gel and ceramic fibres. The gel fibres completely transformed to mullite at 1200 °C, with a smooth surface and uniform diameter. The activation energy for mullite formation in precursor gel fibres was determined by means of differential thermal analysis. The value obtained, Ea = 741.4 kJ/mol, was lower than most data reported in the literatures, which was attributed to the silica–alumina micro-phase separation when organic acids decomposed during gel fibres heating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Dong · J. Alloys Compd. · 2008 · 460 · 65110.1016/j.jallcom.2007.06.043 ↗
2. Behmanesh · J. Alloys Compd. · 2008 · 450 · 42110.1016/j.jallcom.2006.10.138 ↗
3. Zhang · J. Alloys Compd. · 2009 · 484 · 58010.1016/j.jallcom.2009.04.138 ↗
4. Schneider · J. Eur. Ceram. Soc. · 2008 · 28 · 32910.1016/j.jeurceramsoc.2007.03.017 ↗
5. Zhang · J. Eur. Ceram. Soc. · 2009 · 29 · 110110.1016/j.jeurceramsoc.2008.08.008 ↗
6. Chen · Mater. Res. Bull. · 2009 · 44 · 86510.1016/j.materresbull.2008.09.011 ↗
7. Okada · J. Eur. Ceram. Soc. · 1998 · 18 · 187910.1016/S0955-2219(98)00127-7 ↗
8. Chen · J. Mater. Proc. Technol. · 2009 · 209 · 399110.1016/j.jmatprotec.2008.09.017 ↗
9. Chen · J. Am. Ceram. Soc. · 1996 · 79 · 149410.1111/j.1151-2916.1996.tb08755.x ↗
10. Leivo · Mater. Chem. Phys. · 2009 · 115 · 5610.1016/j.matchemphys.2008.11.018 ↗
11. Lee · Ceram. Int. · 2002 · 28 · 93510.1016/S0272-8842(02)00077-9 ↗
12. Douy · J. Eur. Ceram. Soc. · 2006 · 26 · 144710.1016/j.jeurceramsoc.2005.02.017 ↗
13. Chandradass · J. Mater. Proc. Technol. · 2006 · 173 · 27510.1016/j.jmatprotec.2005.11.030 ↗
14. Padmaj · Int. J. Inorg. Mater. · 2001 · 3 · 69310.1016/S1466-6049(01)00189-1 ↗
15. Beran · J. Eur. Ceram. Soc. · 2001 · 21 · 247910.1016/S0955-2219(01)00265-5 ↗
16. Okada · J. Eur. Ceram. Soc. · 2008 · 28 · 37710.1016/j.jeurceramsoc.2007.03.015 ↗
17. Campos · Mater. Sci. Eng. B · 2005 · 112 · 16910.1016/j.mseb.2005.02.050 ↗
18. Okada · Mater. Lett. · 2003 · 57 · 315510.1016/S0167-577X(03)00013-2 ↗
19. Johnsona · J. Eur. Ceram. Soc. · 2001 · 21 · 254110.1016/S0955-2219(01)00268-0 ↗
20. Chen · J. Eur. Ceram. Soc. · 2004 · 24 · 238910.1016/S0955-2219(03)00631-9 ↗
21. Tkalcec · J. Eur. Ceram. Soc. · 2005 · 25 · 61310.1016/j.jeurceramsoc.2004.02.015 ↗