journal article·2001-02

Mechanical alloying during cryomilling of a 5000 Al alloy/AlN powder: the effect of contamination

C Goujon, P Goeuriot, P Delcroix, G Le Caër

Journal of Alloys and Compounds· Volume 315· Issue 1-2
Publisher page

Abstract

Elemental powders of 80 vol% 5000 Al alloy (3 wt% Mg) and 20 vol% AlN were milled either in liquid nitrogen or at room temperature under argon. The milling of the mixture involved changes in the chemical composition: Fe contamination, oxidation and in-situ nitridation. The effects of milling time and temperature on the contamination of the system were analysed. Oxidation and in-situ nitridation were characterized by a LECO analyser and thermal desorption measurements, whereas Mossbauer spectroscopy was used to study the mechanical alloying of the Al alloy. The results show that a metastable solid solution of Mg and Fe in Al is formed during cryomilling. The occurrence of mechanical alloying in spite of the very low milling temperature is interpreted as a consequence of the fine crystallite size of the Al matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Lai · J. Mater. Sci. · 1994 · 29 · 618110.1007/BF00354559 ↗
2. Troadec · J. Eur. Ceram. Soc. · 1997 · 17 · 186710.1016/S0955-2219(97)00068-X ↗
3. M. Chédru, Elaboration et caractérisation de composites à matrice métallique d’aluminium renforcée par des particules de nitrure d’aluminium, Doctoral Thesis, University of Caen, France, 1999, 207 pp.
4. Couturier · J. Eur. Ceram. Soc. · 1997 · 17 · 186110.1016/S0955-2219(97)87873-9 ↗
5. Imai · Scripta Metall. Mater. · 1994 · 31 · 32110.1016/0956-716X(94)90290-9 ↗
6. Imai · Scripta Mater. · 1996 · 35 · 119910.1016/1359-6462(96)00284-9 ↗
7. M. Passaret, J. Lostec, J.P. Bertot, Y. Laurent, P. L’Haridon, J. Guyader, Procédé de synthèse à basse température de poudres de nitrures, en particulier de nitrure d’aluminium, Patent F 91.11801, 1991.
8. Yamada · J. Mater. Res. · 1993 · 8 · 131710.1557/JMR.1993.1317 ↗
9. Goujon · Powder Technol. · 1999 · 105 · 32810.1016/S0032-5910(99)00155-2 ↗
10. C. Goujon, Elaboration par cryobroyage et métallurgie des poudres de nanocomposites à matrice d’alliage d’aluminium renforcée par des particules de nitrure d’aluminium, Doctoral Thesis, Ecole Nationale Supérieure des Mines de St Etienne and Institut National Polytechnique de Grenoble, France, 2000, 264 pp.
11. Le Caër · J. Phys. E: Sci. Instr. · 1979 · 12 · 108310.1088/0022-3735/12/11/018 ↗
12. Le Caër · J. Phys. Condens. Matter · 1998 · 10 · 1071510.1088/0953-8984/10/47/020 ↗
13. Hightower · J. Electrochem. Soc. · 2000 · 147 · 110.1149/1.1493855 ↗
14. Litvintsev · Poroshk. Metall. · 1967 · 49 · 1
15. Arbuzova · Hydrogen Met. Congr. Int. · 1973 · 1972 · 222
16. Luton · Mater. Res. Soc. Symp. Proc. · 1989 · 132 · 7910.1557/PROC-132-79 ↗
17. Aikin · Scripta Metall. Mater. · 1994 · 30 · 11910.1016/0956-716X(94)90369-7 ↗
18. Perez · Nanostruct. Mater. · 1996 · 7 · 56510.1016/0965-9773(96)00020-7 ↗
19. 1967 · Tome XVII · 798
20. Huang · Nanostruct. Mater. · 1995 · 5 · 63110.1016/0965-9773(95)00280-R ↗