Microstructure and high-temperature wear and oxidation resistance of laser clad γ/W2C/TiC composite coatings on γ-TiAl intermetallic alloy
Source abstract
Abstract
There are very strong interests in improving the high-temperature wear resistance of the y-TiAl intermetallic alloy, especially when applied as tribological moving components. In this paper, microstructure, high-temperature dry sliding wear at 600 degrees C and isothermal oxidation at 1000 degrees C on ambient air of laser clad gamma/W2C/TiC composite coatings with different constitution of Ni-Cr-W-C precursor mixed powders on TiAl alloy substrates have been investigated. The results show that microstructure of the laser fabricated composite coatings possess non-equilibrium microstructure consisting of the matrix of nickel-base solid solution gamma-NiCrAl and reinforcements of TiC, W2C and M23C6 carbides. Higher wear resistance than the original TiAl alloy is achieved in the composite coatings under high-temperature wear test conditions. However, the oxidation resistance of the laser clad gamma/W2C/TiC composite coatings is deceased. The corresponding mechanisms resulting in the above behaviors of the laser clad composite coatings are discussed. (c) 2006 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Dimiduk · Mater. Sci. Eng. · 1999 · A263 · 28110.1016/S0921-5093(98)01158-7 ↗
2. Kim · Acta Metall. Sin. · 1999 · 12 · 334
3. Ye · Mater. Sci. Eng. · 1999 · A263 · 28910.1016/S0921-5093(98)01159-9 ↗
4. Blackburn, M.J., Smith, M.P., 1989. Report WPDC-TR-89-4133, 1989.
5. Zhang · Surf. Coat. Technol. · 1998 · 100–101 · 21410.1016/S0257-8972(97)00616-6 ↗
6. Yoshihara · ISIJ Int. · 1991 · 31 · 120110.2355/isijinternational.31.1201 ↗
7. Chen · Appl. Surf. Sci. · 2003 · 220 · 18610.1016/S0169-4332(03)00816-X ↗
8. Liu · Appl. Surf. Sci. · 2006 · 252 · 573510.1016/j.apsusc.2005.07.064 ↗
9. Vamsi Krishna · Int. J. Refract. Met. Hard Mater. · 2002 · 20 · 35510.1016/S0263-4368(02)00073-2 ↗
10. Yang · Mater. Lett. · 2004 · 58 · 295810.1016/j.matlet.2004.03.051 ↗
11. Guo · Trans. Nonferrous Met. Soc. China · 1995 · 5 · 142
12. Cottrell · Mater. Sci. Technol. · 1995 · 11 · 20910.1179/mst.1995.11.3.209 ↗
13. Wu · Wear · 2004 · 257 · 14210.1016/j.wear.2003.10.019 ↗
14. Hawk · Mater. Sci. Eng. · 1997 · A239–240 · 89910.1016/S0921-5093(97)00681-3 ↗
15. Wang · Acta Mater. · 2003 · 51 · 631910.1016/S1359-6454(03)00465-8 ↗
16. Liu · Scripta Mater. · 2005 · 51 · 123510.1016/j.scriptamat.2005.03.002 ↗
17. Zhao · J. Alloys Compd. · 2005 · 391 · 13610.1016/j.jallcom.2004.07.073 ↗
18. Izumi · Intermetallics · 2005 · 13 · 61510.1016/j.intermet.2004.10.012 ↗
19. Basu · Mater. Sci. Eng. · 1996 · A209 · 20610.1016/0921-5093(95)10145-4 ↗
20. Gulbransen · 1947
21. Liu · Chin. J. Nonferrous Met. · 2000 · 10 · 785