Microstructures of eutectic Sn–Ag–Zn solder solidified with different cooling rates
Source abstract
Abstract
Abstract Microstructures of eutectic Sn–3.7 wt.% Ag–0.9 wt.% Zn solder were investigated under different cooling rates (0.16 K/s, about 102 K/s and about 104 K/s). As learned from microstructural analyses, two kinds of IMCs (Ag3Sn and AgZn) were found. At rates of 0.16 K/s and about 102 K/s, the solidified microstructures were so similar to each other that both Ag3Sn and AgZn IMCs particles were found homogeneously distributing in the formed eutectic microstructures. And the amount of nano-sized Ag3Sn IMCs in the solder increases with the cooling rate increasing. Regarding to AgZn IMCs, there are two kinds of crystalline structures, hexagonal close-packed structure (ζ-AgZn) and simple cubic structure (β′-AgZn) existing in each of them. Instead of the above mentioned IMCs, primary β-Sn dendrites and gray eutectic colonies were found in the lead-free solder cooled with a rate about 104 K/s, which could be attributed to the shift of eutectic point under rapid solidification condition. The microstructural stability of the rapidly solidified solder was explored by high-temperature annealing. After annealing the β-Sn dendrites grew and ternary Ag–Zn IMCs separated on the grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. J.X. Jiang, J.E. Lee, K.S. Kim, K. Suganuma. J. Alloy Compd., in press.
2. N.S. Liu, K.L. Lin. J. Alloy Compd., in press.
3. Mayappan · J. Alloy Compd. · 2007 · 436 · 11210.1016/j.jallcom.2006.07.035 ↗
4. Abtew · Mater. Sci. Eng. · 2000 · 27 · 9510.1016/S0927-796X(00)00010-3 ↗
5. Wu · Mater. Sci. Eng. R · 2004 · 44 · 110.1016/j.mser.2004.01.001 ↗
6. Zeng · Mater. Sci. Eng. R · 2002 · 38 · 5510.1016/S0927-796X(02)00007-4 ↗
7. Knott · Z. Metallkd. · 2005 · 96 · 3810.3139/146.018073 ↗
8. Wang · J. Alloy Compd. · 2007 · 438 · 11010.1016/j.jallcom.2006.08.012 ↗
9. McCormack · Appl. Phys. Lett. · 1993 · 63 · 1510.1063/1.109734 ↗
10. Fawzy · Mater. Charact. · 2007 · 58 · 32310.1016/j.matchar.2006.05.013 ↗
11. Ohtani · J. Jpn. Instrum. Methods · 1999 · 63 · 68510.2320/jinstmet1952.63.6_685 ↗
12. Ohnuma · IEEE Trans. Electron. Pack. Manuf. · 2003 · 26 · 8410.1109/TEPM.2003.813003 ↗
13. Vassilev · J. Alloy Compd. · 2001 · 327 · 28510.1016/S0925-8388(01)01562-6 ↗
14. Vassilev · Arch. Metall. · 2001 · 46 · 249
15. Vassilev · J. Alloy Compd. · 2002 · 334 · 18210.1016/S0925-8388(01)01778-9 ↗
16. Shen · Trans. Nonferr. Metal. Soc. China · 2006 · 16 · 5910.1016/S1003-6326(06)60011-3 ↗
17. Ochoa · J. Electron. Mater. · 2003 · 32 · 141410.1007/s11664-003-0109-z ↗
18. Shen · J. Electron. Mater. · 2005 · 34 · 159110.1007/s11664-005-0170-x ↗
19. Kerr · Acta Mater. · 2004 · 52 · 452710.1016/j.actamat.2004.06.010 ↗