Optimization of hot-press conditions of Zn4Sb3 for high thermoelectric performance
Source abstract
Abstract
Thermoelectric Zn 4Sb 3 bulk specimens have been fabricated by hot pressing at various temperatures from 738 to 753 K either in a vacuum or under pressurized Ar. The bulk specimens consist of a single-phase p-type semiconductive ε-Zn 4Sb 3 compound. Compositional change due to Zn vaporization, anticipated during the high temperature processes, could be avoided by adding excess Zn to the starting powder. Bulk density, electric resistivity, Seebeck coefficient and thermal conductivity were evaluated. Observed bulk densities of 6.2–6.4 g/cm 3 exceeded the value of 6.08 g/cm 3 determined from X-ray diffraction data. Electric resistivity decreases with increasing hot-pressing temperature in the range from 323 to 673 K, and exhibits unusual temperature-dependent hysteresis. Seebeck coefficient and thermal conductivity values were much closer to previously reported data, with only slight differences among specimens measured at various hot-pressing temperatures. A material fabricated in a vacuum at 748 K, had a thermoelectric figure of merit (ZT) greater than 1, because it had small electric resistivity and thermal conductivity values. Application of a pressurized Ar atmosphere during hot pressing did not contribute to improved thermoelectric performance of Zn 4Sb 3 compound.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Takei · Sci. Rep. Tohoku I · 1927 · 16 · 1031
2. Spitzer · J. Phy. Chem. Solids · 1970 · 31 · 1910.1016/0022-3697(70)90284-2 ↗
3. T. Caillat, J. Fleurial, A. Borshchevsk, in: Proceedings of the 15th International Conference on Thermoelectrics, 1996, pp. 151–154.
4. Caillat · J. Phys. Chem. Solids · 1997 · 58 · 111910.1016/S0022-3697(96)00228-4 ↗
5. Tapiero · Sol. Energy Mater · 1985 · 12 · 25710.1016/0165-1633(85)90051-6 ↗
6. Zhu · Mater. Lett · 2000 · 46 · 4410.1016/S0167-577X(00)00140-3 ↗
7. T. Souma, G. Nakamoto, M. Kurisu, in: Proceedings of the 20th International Conference on Thermoelectrics, 2001, pp. 274–277.
8. Souma · J. Alloys Compd · 2002 · 340 · 27510.1016/S0925-8388(02)00113-5 ↗
9. Izard · Calphad · 2001 · 25 · 56710.1016/S0364-5916(02)00008-1 ↗
10. T. Koyanagi, K. Hino, Y. Nagamoto, H. Yoshitake, K. Kishimoto, in: Proceedings of the 16th International Conference on Thermoelectrics, 1997, pp. 463–466.
11. Zhang · J. Alloys Compd · 2003 · 358 · 25210.1016/S0925-8388(03)00074-4 ↗
12. T. Aizawa, A. Yamamoto, T. Ohta, H. Takazawa, C. Li, in: Proceedings of the Autumn Meeting of Japan Society of Powder and Powder Metallurgy, Japan Society of Powder and Powder Metallurgy, 2001, p. 180.
13. Y. Ohzora, A. Nagai, H. Hayashi, K. Fujii, in: Proceedings of the Thermoelectric Conversion Symposium 2002 (TEC 2002) of Netsuden Henkan Kenkyukai, 2003, pp. 24–25.
14. Ur · J. Alloys Compd · 2003 · 361 · 8410.1016/S0925-8388(03)00418-3 ↗
15. Ur · J. Mater. Sci · 2003 · 38 · 355310.1023/A:1025608926808 ↗
16. Ryskewitsch · J. Am. Ceram. Soc · 1953 · 36 · 6510.1111/j.1151-2916.1953.tb12837.x ↗
17. W.D. Kingery, H.K. Bowen, D.R. Uhlmann, Introduction to Ceramics, second ed., Wiley, New York, 1976, pp.791–797.
18. Mayer · J. Less-Common Metals · 1978 · 59 · 4310.1016/0022-5088(78)90109-1 ↗
19. Kim · Phys. Rev. B · 1998 · 57 · 619910.1103/PhysRevB.57.6199 ↗
20. T. Caillat, Private communication.