journal article·2007-01

Impression creep behavior of cast Pb–Sb alloys

R. Mahmudi, A.R. Geranmayeh, A. Rezaee-Bazzaz

Journal of Alloys and Compounds· Volume 427· Issue 1-2
Publisher page

Abstract

Abstract Creep behavior of the cast the Pb–1.25%Sb and Pb–4.5%Sb alloys was studied by impression testing. The tests were carried out under constant stress in the range of 40–135 MPa and at temperatures in the range of 300–420 K. Assuming a power law relationship between the impression velocity and stress, power law stress exponents of 3.3 and 12.5 were obtained for Pb–1.25%Sb at low and high stresses, respectively. These stress exponents for the Pb–4.5%Sb alloy were found to be 4 and 19 in the similar stress and temperature ranges. Analysis of the data showed that for all loads and temperatures, the activation energy for both materials was stress-independent with an average value of 63 kJ mol −1 . Based on the obtained stress exponents and activation energy data, which is very close to 65.6 kJ mol −1 for Pb diffusion in the Pb grain boundaries, it is proposed that in the low stress regime the operative creep mechanism is grain boundary diffusion. This behavior is in contrast to the high stress regime in which, the stress exponents of 12.5 and 19 are indicative of a dislocation creep mechanism in both alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Sklarchuk · J. Power Sources · 1993 · 38 · 4710.1016/0378-7753(93)80136-D ↗
2. Hilger · J. Power Sources · 1995 · 53 · 4510.1016/0378-7753(94)01977-4 ↗
3. Jullian · J. Power Sources · 2003 · 116 · 18510.1016/S0378-7753(02)00705-X ↗
4. Metikos-Hukovic · J. Power Sources · 1997 · 64 · 1310.1016/S0378-7753(96)02494-9 ↗
5. Kosai · J. Power Sources · 1997 · 67 · 4310.1016/S0378-7753(97)02496-8 ↗
6. Sahota · Mater. Design · 2000 · 21 · 15910.1016/S0261-3069(99)00095-3 ↗
7. Dorner · Mater. Sci. Eng. A · 2003 · 257 · 34610.1016/S0921-5093(03)00205-3 ↗
8. Yang · Mater. Sci. Eng. A · 1995 · 201 · 4010.1016/0921-5093(95)09762-7 ↗
9. Juhasz · J. Mater. Sci. · 1986 · 21 · 328710.1007/BF00553371 ↗
10. Juhasz · J. Mater. Sci. Lett. · 1986 · 5 · 3510.1007/BF01671427 ↗
11. Balani · Phys. Stat. Sol. A · 2003 · 198 · 38710.1002/pssa.200306626 ↗
12. Rani · Mater. Sci. Technol. · 2004 · 20 · 40310.1179/026708304225012161 ↗
13. Dutta · Mater. Sci. Eng. A · 2004 · 379 · 40110.1016/j.msea.2004.03.023 ↗
14. Pan · Mater. Sci. Eng. A · 2004 · 379 · 15410.1016/j.msea.2004.01.034 ↗
15. Rani · Mater. Sci. Technol. · 2004 · 20 · 88510.1179/026708304225017283 ↗
16. Rezaee-Bazzaz · Mater. Sci. Technol. · 2005 · 21 · 86110.1179/174328405X46079 ↗
17. Roumina · J. Matter. Sci. Lett. · 2003 · 22 · 143510.1023/A:1025767631738 ↗
18. Mahmudi · Matter. Sci. Eng. A · 2004 · 382 · 1510.1016/j.msea.2004.05.078 ↗
19. Roumina · Scripta Mater. · 2004 · 51 · 49710.1016/j.scriptamat.2004.05.048 ↗
20. Mostafa · Physica B · 2004 · 349 · 5610.1016/j.physb.2004.01.159 ↗
21. Al-Ganainy · Phys. Stat. Sol. A · 1998 · 165 · 18510.1002/(SICI)1521-396X(199801)165:1<185::AID-PSSA185>3.0.CO;2-M ↗
22. Sargent · Mater. Sci. Technol. · 1992 · 8 · 59410.1179/mst.1992.8.7.594 ↗
23. Sherby · Prog. Mater. Sci. · 1967 · 13 · 325
24. Mukherjee · ASM Trans. · 1969 · 62 · 155
25. Chu · J. Mater. Sci. · 1977 · 12 · 220010.1007/BF00552241 ↗
26. Sharma · Mater. Sci. Eng. A · 2000 · 278 · 10610.1016/S0921-5093(99)00590-0 ↗
27. Langdon · Mater. Sci. Eng. A · 2000 · 283 · 26610.1016/S0921-5093(00)00624-9 ↗
28. Walser · Scripta Matell. · 1982 · 16 · 21310.1016/0036-9748(82)90389-1 ↗
29. Ashby · Acta Metall. · 1973 · 21 · 14910.1016/0001-6160(73)90057-6 ↗
30. Gifkins · Metall. Trans. A · 1976 · 7 · 122510.1007/BF02656607 ↗
31. Peng · Mater. Sci. Eng. A · 2005 · 410–411 · 4210.1016/j.msea.2005.08.031 ↗
32. Yang · Mater. Sci. Eng. A · 2005 · 409 · 89