Effect of multiple reflow processes on the reliability of ball grid array (BGA) solder joints
Source abstract
Abstract
Abstract This paper studies the mechanical behaviors and microstructures of the ball grid array (BGA) solder joints against OSP-coated Cu pads on FR4 substrates after multiple reflow process. A new Pb-free solder, Sn–3Ag–0.5Cu–8In (SACI), has been compared with the popular Pb-free solder Sn–3Ag–0.5Cu (SAC), and the traditional Sn–37Pb (SP) solder. It is found that SACI solder joints provide higher shearing strength over SAC and SP solder joints during multiple reflow. The shearing force of the three types of solder joints does not have significant change with the increase of the number of reflow cycles. The fracture of all SAC and SP solder joints mainly occurs in the bulk solder, whereas the SACI solder joints show a diverse manner, with various combinations of bulk solder facture, solder/IMC interface dissociation, and pad/resin interface failure. The differences in mechanical behaviors are interpreted in terms of diffusion and interaction, as well as chemical and thermal induced degradation. The microstructure evolutions of the solder joints during multiple reflow soldering are also examined. A continuous change of chemical compositions in the IMC layer/particles has been noticed. Large-shaped Ag–In–Sn phase near the IMC layer has been found within the SACI solder joints on the Cu pads.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Abtew · Mater. Sci. Eng. · 2000 · 27 · 9510.1016/S0927-796X(00)00010-3 ↗
2. B.P. Richards, C.L. Levoguer, C.P. Hunt, K. Nimmo, S. Peters, P. Cusack, An Analysis of the Current Status of Lead-Free Soldering, NPL, ITRI and DTI Joint Report about Pb-free Soldering, January 1999. http://www.npl.co.uk/ei/documents/pbfreereport.pdf.
3. A.J. Rafanelli, The Lead-Free Solder Alternatives Issue: A Defense Industry Perspective. http://www.smta.org/files/smta_boston01_rafanelli.pdf.
4. Garner · 2000 · 6
5. Casey · 2002 · 15
6. Deubzer · 2001 · 290
7. Glazer · J. Electron. Mater. · 1994 · 23 · 69310.1007/BF02651361 ↗
8. Suganuma · Solid State Mater. Sci. · 2001 · 5 · 5510.1016/S1359-0286(00)00036-X ↗
9. Zeng · Mater. Sci. Eng.: Rep. · 2002 · 38 · 5510.1016/S0927-796X(02)00007-4 ↗
10. Hwang · 2001
11. Li · J. Mater. Res. · 2002 · 17 · 161210.1557/JMR.2002.0239 ↗
12. Alam · J. Appl. Phys. · 2003 · 94 · 410810.1063/1.1602563 ↗
13. Alam · J. Mater. Res. · 2004 · 19 · 130310.1557/JMR.2004.0170 ↗
14. Alam · Microelectron. Reliab. · 2002 · 42 · 106510.1016/S0026-2714(02)00068-9 ↗
15. M.O. Alam, Ph.D. Thesis, Electronics Engineering Department, City University of Hong Kong, 2004.
16. Islam · Microelectron. Reliab. · 2003 · 43 · 203110.1016/S0026-2714(03)00190-2 ↗
17. Huang · 2002 · 968
18. Chong · 2004 · 735
19. Kim · J. Electron. Mater. · 2004 · 33 · 118210.1007/s11664-004-0121-y ↗
20. Yoon · J. Alloys Compd. · 2005 · 391 · 8210.1016/j.jallcom.2004.09.001 ↗
21. Aderspm · J. Electron. Mater. · 2004 · 33 · 148510.1007/s11664-004-0090-1 ↗
22. T. Siewert, S. Liu, D.R. Smith, J.C. Madeni, Database for Solder Properties with Emphasis on New Lead-free Solders, Report on Properties of Lead-Free Solders, Release 4.0, National Institute of Standards and Technology & Colorado School of Mines, February, 2002.
23. Wassink · 1989
24. Wu · J. Electron. Mater. · 2004 · 33 · 15710.1007/s11664-004-0174-y ↗
25. Vianco · IEEE Trans. Comp. Packag. Manuf. Technol.—Part A · 1997 · 20 · 47810.1109/95.650938 ↗
26. Chada · J. Electron. Mater. · 1999 · 28 · 119410.1007/s11664-999-0157-0 ↗
27. Ma · J. Appl. Phys. · 2002 · 91 · 331210.1063/1.1445283 ↗