journal article·2008-06

Tensile properties and microstructural characterization of Sn–0.7Cu–0.4Co bulk solder alloy for electronics applications

Cristina Andersson, Peng Sun, Johan Liu

Journal of Alloys and Compounds· Volume 457· Issue 1-2
Publisher page

Abstract

The ternary Sn–Cu–Co system eutectic composition was obtained by means of CALPHAD (CALculation of PHAse Diagram) methodology and it was found to be 0.4% Co and 0.7% Cu (wt%) with a melting point of 224 ◦C. The tensile behavior of this alloy was investigated at different strain rates (10−5, 10−4 and 10−3 s−1) and compared to both Sn–37Pb and Sn–4.0Ag–0.5Cu. The Sn–4.0Ag–0.5Cu alloy depicts the highest ultimate tensile strength (UTS) followed by the Sn–37P and finally the Sn–0.7Cu–0.4Co system. The elastic modulus was also higher for the Sn–4.0Ag–0.5Cu followed by the Sn–0.7Cu–0.4Co and last the Sn–37Pb. The microstructure of the Sn–0.7Cu–0.4Co alloy is composed of two types of intermetallic phases, (Cu,Co)6Sn5 and (Co,Cu)Sn2 dispersed in a Sn-rich matrix. The microstructure of this alloy proved to be very stable, after aging at 150 °C for 24 h. The eutectic Sn–0.7Cu–0.4Co solder alloy can therefore be a very good alternative for theSACalloys for surface mount technology applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Abtew · Mater. Sci. Eng. · 2000 · 27 · 9510.1016/S0927-796X(00)00010-3 ↗
2. Pang · Int. J. Fatigue · 2004 · 26 · 86510.1016/j.ijfatigue.2003.12.004 ↗
3. Wu · Mater. Sci. Eng. · 2004 · R44 · 110.1016/j.mser.2004.01.001 ↗
4. http://www.nemi.org/projects/ese/if_assembly.html.
5. http://www.metalprices.com/FreeSite/metals/ag/ag.asp.
6. Liu · J. Electron. Mater. · 2004 · 33 · 93510.1007/s11664-004-0019-8 ↗
7. Zugproben, DIN 50 125, ISO 6892-1984.
8. Standard methods of tension testing of metallic foil, E345-93, Annual Book of ASTM standards, vol. 03.01, 1993.
9. Standard methods of tension testing of metallic materials, E8-93, Annual Book of ASTM standards, vol. 03.01, 1993.
10. Sharif · J. Alloys Compd. · 2005 · 388 · 16210.1016/j.jallcom.2004.07.015 ↗
11. Liu · J. Electron. Mater. · 2000 · 29 · 62210.1007/s11664-000-0056-x ↗
12. Kim · Mater. Sci. Eng. · 2003 · A333 · 223
13. Kim · Microelectron. Reliab. · 2003 · 43 · 25910.1016/S0026-2714(02)00239-1 ↗
14. Sun · 2006
15. Shohji · Mater. Sci. Eng. · 2004 · A366 · 5010.1016/j.msea.2003.09.057 ↗
16. Shohji · J. Mater. Sci.: Mater. Electron. · 2004 · 15 · 21910.1023/B:JMSE.0000012458.57604.db ↗
17. Kilinski · 1991
18. Nose · J. Electron. Pack. · 2003 · 125 · 5910.1115/1.1533058 ↗
19. Plumbridge · J. Mater. Sci.: Mater. Electron. · 1999 · 10 · 46110.1023/A:1008930430875 ↗
20. Lang · Mater. Charact. · 2005 · 54 · 22310.1016/j.matchar.2004.11.013 ↗
21. 1994
22. Holloman · Trans. Am. Inst. Min. Metall. Petrol. Eng. · 1945 · 162 · 268
23. McCabe · Metall. Mater. Trans. · 2002 · 33A · 153110.1007/s11661-002-0075-8 ↗
24. Zhu · 2005 · 466