journal article·2004-11

Microstructure and properties of ultrafine WC–0.6VC–10Co hardmetals densified by pressure-assisted critical liquid phase sintering

Chenguang Lin, Erich Kny, Guansen Yuan, Boro Djuricic

Journal of Alloys and Compounds· Volume 383· Issue 1-2
Publisher page

Abstract

Abstract Ultrafine grained WC–0.6VC–10Co hardmetals are produced by monoaxial vacuum hot pressing (MVHP) between 1280 and 1320 °C around the eutectic temperature of the alloy. The microstructure and properties of the resulting hardmetals show that fully densified alloys can be obtained when MVHP is carried out at temperatures ≥1300 °C starting from commercially available ultrafine WC and cobalt powders. In the fully densified hardmetals, the grain size of WC is not increased. The average grain interception is between 169 and 179 nm and hardness values are over HV 30 2000. The Palmqvist toughness ( K c ) of the hardmetals increases with sintering temperature; the highest value obtained is 517 N/mm at 1320 °C. The distribution of the Co binder is almost completely homogeneous at micro level but still inhomogeneous at submicron level. In order to further improve the toughness of the ultrafine WC–VC–10Co hardmetals, the optimization of the composition, the use of pressure-assisted liquid phase sintering, and the optimization of the milling regime are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Diamond and Carbon-based Materials Research · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. V.A. Falkovsky, L.I. Klyachko, V.N. Glushkov, et al., in: G. Kneringer, P. Rödhammer, H. Wildner (Eds.), Proceedings of the 15th International Plansee Seminar on P/M Hard Materials, vol. 2, Plansee AG, Tyrol, Austria, 2001, pp. 29–34.
2. Y. Yamamoto, A. Matsumoto, Y. Doi, in: G. Kneringer, P. Rödhammer, P. Wilhartitz (Eds.), Proceedings of the 14th International Plansee Seminar on Cemented Carbides and Hard Materials, vol. 2, Plansee AG, Reutte, Austria, 1997, pp. 596–608.
3. G.S. Upadhyaya, Nature and Properties of Refractory Carbides, Nova Science Publishers Inc., 1996, p. 401.
4. K. Hayashi, M. Matsuoka, in: G. Kneringer, P. Rödhammer, P. Wilhartitz (Eds.), Proceedings of the 14th International Plansee Seminar on Cemented Carbides and Hard Materials, vol. 2, Plansee AG, Reutte, Austria, 1997, pp. 609–621.
5. Bock · Powder Metall · 1992 · 24 · 20
6. P. Villars, A. Prince, H. Okamoto, Handbook of Ternary Alloy Phase Diagrams, vol. 5, ASM International, 2000, p. 6602.
7. G. Gille, G. Leitner, B. Roebuck, in: Proceedings of the 1996 European Conference on Advances in Hard Materials Production, Stockholm, 27–29 May 1996, pp. 195–210.
8. G. Gille, B. Szesny, K. Dreyer et al., in: G. Kneringer, P. Rodhammer, H. Wildner (Eds.), Proceedings of the 15th International Plansee Seminar on P/M Hard Materials, vol. 2, Plansee AG, Tyrol, Austria, 2001, pp. 782–816.