Interlayer-assisted growth of quenched-produced diamond coatings on Mg–Ca alloys for improved corrosion resistance in sodium chloride solution
Source abstract
Abstract
Corrosion-resistant coatings are essential for extending the service life of magnesium alloys. In this work, quenched-produced diamond (Q-dia) films were deposited on Mg-Ca alloy substrates by physical vapor deposition using high-purity graphite (99.999%) as the carbon source. To enhance interfacial bonding, three thin interlayers (Al, Ti, and TiC) were examined as interfacial layers. Among them, the TiC interlayer effectively enabled successful adhesion and produced a uniform coating. Scanning electron microscopy (SEM) revealed dense nanodiamond grains growth with a compact, a defect-free cross section. Electrochemical analyses demonstrated that Q-dia coatings markedly enhanced the corrosion resistance of Mg-Ca alloy in 3.5 wt% NaCl solution, increasing the corrosion resistance from 0.336 kΩ.cm² to 1.78 kΩ.cm². This enhancement is attributed to the highly compact microstructure of Q-dia grains containing both sp 2 - and sp 3 hybridized -carbon phases, as confirmed by Raman spectroscopy. These findings highlight Q-dia as promising protective coating films for improving the corrosion resistance and durability of magnesium-based alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. A high-specific-strength and corrosion-resistant magnesium alloy10.1038/nmat4435 ↗
2. Evolution, limitations, advantages, and future challenges of magnesium alloys as materials for aerospace applications10.1016/j.jallcom.2024.176707 ↗
3. Recently deepened insights regarding Mg corrosion and advanced engineering applications of Mg alloys10.1016/j.jma.2023.08.012 ↗
4. Tunable corrosion protection of calcium carbonate (CaCO3) coating on biomedical Mg2Zn0.2Ca alloy10.1016/j.matdes.2022.111073 ↗
5. Effect of atomic layer plasma treatment on TALD-ZrO2 film to improve the corrosion protection of Mg-Ca alloy10.1016/j.surfcoat.2021.127811 ↗
6. Multilayer Al2O3/ZrO2 coatings via PEALD for enhanced corrosion resistance and biocompatibility of biodegradable Mg–Ca alloys10.1016/j.matchemphys.2025.131297 ↗
7. Microstructure engineering in diamond-based materials10.1038/s41563-025-02168-z ↗
8. Influence of interlayers on corrosion resistance of diamond-like carbon coating on magnesium alloy10.1016/j.surfcoat.2009.12.009 ↗
9. Improvement of corrosion protection property of Mg-alloy by DLC and Si-DLC coatings with PBII technique and multi-target DC-RF magnetron sputtering10.1016/j.nimb.2009.01.101 ↗
10. Enhanced wear and corrosion resistance of AZ91 magnesium alloy via adherent Si-DLC coating with Si-interlayer: impact of biasing voltage10.3390/coatings14030341 ↗
11. DLC coating on Mg–Li alloy10.1016/j.surfcoat.2006.07.080 ↗
12. Impedance spectroscopy analysis of n-type (nitrogen-doped) ultrananocrystalline diamond/p-type Si heterojunction diodes10.1088/1402-4896/aba97e ↗
13. Optical and structural characterization of ultrananocrystalline diamond/hydrogenated amorphous carbon composite films deposited via coaxial arc plasma10.1016/j.cap.2018.11.012 ↗
14. Effects of nitrogen doping on the electrical conductivity and optical absorption of ultrananocrystalline diamond/hydrogenated amorphous carbon films prepared by coaxial arc plasma deposition10.7567/JJAP.55.07LE01 ↗
15. Overcoming the impact of post-annealing on uniformity of diamond (100) Schottky barrier diodes through corrosion-resistant nanocarbon ohmic contacts10.1088/2053-1591/aca31f ↗
16. Nanocarbon ohmic electrodes fabricated by coaxial arc plasma deposition for phosphorus-doped diamond electronics application10.1063/5.0093470 ↗
17. Synergistic effects of optimal negative bias-enhanced growth of quenched-produced diamond films on titanium substrates10.35848/1882-0786/acdfb7 ↗
18. Tribological performance of quenched diamond coatings on pure titanium under dry sliding conditions10.1016/j.matlet.2025.139592 ↗
19. The effect of time dependent native oxide surface conditions on the electrochemical corrosion resistance of Mg and Mg-Al-Ca alloys10.1016/j.corsci.2022.110925 ↗
20. Enhance diamond coating adhesion by oriented interlayer microcracking10.1063/1.3267162 ↗
21. High-resolution chemical and structural characterization of the native oxide scale on a Mg-based alloy10.1016/j.corsci.2023.111776 ↗
22. Laser-induced structure transition of diamond-like carbon coated on cemented carbide and formation of reduced graphene oxide10.1557/mrc.2019.88 ↗
23. Formation of low resistivity layers on singlecrystalline diamond by excimer laser irradiation10.1016/j.diamond.2019.04.013 ↗
24. Adhesion of nanodiamond composite films on Ti substrates at room temperature via hybrid ion etching gun and coaxial arc plasma deposition10.35848/1882-0786/ac99b6 ↗
25. Corrosion behavior of diamond-like carbon film induced by Al/Ti co-doping10.1016/j.apsusc.2019.144877 ↗
26. Corrosion resistance and electrical contact resistance of a thin permanganate conversion coating on dual-phase LZ91 Mg–Li alloy10.1016/j.jmrt.2021.02.050 ↗
27. The influence of electrode size on resistance measurement in the modified four-electrodes method10.1016/j.measurement.2017.05.006 ↗
28. Discharge and corrosion behaviors of the α-Mg and β-Li based Mg alloys for Mg-air batteries at different current densities10.1016/j.matdes.2018.09.011 ↗
29. Application of electrochemical impedance spectroscopy to commercial Li-ion cells: a review10.1016/j.jpowsour.2020.228742 ↗
30. Enhanced corrosion resistance, mechanical properties, and biocompatibility of N-DLC coatings prepared on WE43 alloy via FCVA technology10.1016/j.jallcom.2024.178106 ↗
31. Investigating local corrosion processes of magnesium alloys with scanning probe electrochemical techniques: a review10.1016/j.jma.2022.09.024 ↗
32. Enhancing corrosion resistance of magnesium alloys via combining green chicory extracts and metal cations as organic-inorganic composite inhibitor10.1016/j.corcom.2022.06.002 ↗
33. Study of nickel-doped diamond-like carbon films by laser-assisted electrodeposition10.1063/5.0267482 ↗
34. The effects of Ti content on the wear and corrosion resistance of Ti-doped DLC films deposited on AZ91 surface via magnetron sputtering10.1016/j.ceramint.2025.07.074 ↗
35. Structure and properties of Si and N co-doping on DLC film corrosion resistance10.1016/j.ceramint.2022.09.178 ↗
36. EIS capacitance diagnosis of nanoporosity effect on the corrosion protection of DLC films10.1016/S0925-9635(01)00568-4 ↗