journal article·2025-11Open access

The effect of sintering time on the microstructure, mechanical property, and corrosion resistance of vacuum-sintered TC4-Gd2O3 neutron absorbing composites

Weiwei Xiao, Xiao Hu, Shiming Shen, Shuliang Zou, Jinghao Huang, Meilan Sun, Yihong Liu, Zhenghao Ren

Abstract

This study proposes a novel TC4-Gd 2 O 3 neutron absorbing composite, which employs TC4 as the matrix and 10 wt% Gd 2 O 3 as the neutron absorber. The effect of sintering time on the phase, microstructure, density, compressive property, and corrosion resistance of the vacuum sintered TC4–10Gd 2 O 3 composites was investigated. The Ti in the composite exists as α-Ti and β-Ti, with α-Ti dominating. The extension of sintering time promotes the generation and growth of secondary α-Ti and β grains. And the density of the composite increases with the prolongation of sintering time. The compressive strength of the composite fabricated by sintering time of 2 h is highest, reaching 901.03 MPa. Pitting is the main form of corrosion of TC4–10Gd 2 O 3 composites in H 3 BO 3 solution. The interface between Gd 2 O 3 particles and Ti becomes the most prone location for pitting. The main corrosion products include Al(OH) 3 , GdAlO 3 , Ti 2 O 3 , and Ti 3 O 5 . The research results in this study indicate that the optimal sintering time for the TC4–10Gd 2 O 3 neutron absorbing composite is 2 h at 1000 °C.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Nuclear materials and radiation effects · Radiation Shielding Materials Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. The advancement of neutron-shielding materials for the transportation and storage of spent nuclear fuel10.3390/ma15093255 ↗
2. Performance evaluation of METAMIC neutron absorber in spent fuel storage rack10.1016/j.net.2018.01.017 ↗
3. The potential use of boron containing resources for protection against nuclear radiation10.1016/j.radphyschem.2021.109601 ↗
4. Recent progress in Gd-containing materials for neutron shielding application: A review10.3390/ma16124305 ↗
5. Research progress of rare earth composite shielding materials10.1016/j.jre.2022.06.004 ↗
6. High-performance PEEK composite materials research on 3D printing for neutron and photon radiation shielding
7. Boron-polymer composites engineered for compression molding, foaming, and additive manufacturing10.1002/app.55236 ↗
8. Microstructural evolution and mechanical properties of titanium-alloying high borated steels fabricated by twin-roll strip casting
9. Liquation cracking resistance and microstructural characteristics leading to low susceptibility in borated stainless steels for neutron absorbers
10. Improving the ductility of laser directed energy deposited borated stainless steel by increasing laser power10.1016/j.jmapro.2025.04.077 ↗
11. A review of recent studies of fabrication of Al-B4C composite sheets used in nuclear metal casks
12. Enhancing high-temperature strength of (B4C+Al2O3)/Al designed for neutron absorbing materials by constructing lamellar structure
13. Accelerated corrosion tests of Al-B4C neutron absorber used in spent nuclear fuel pool10.1016/j.jnucmat.2021.153011 ↗
14. Manufacturing B4C-Al dispersion absorber plates using the picture-frame technique
15. The design, fabrication and properties of B4C/Al neutron absorbers10.1016/j.jnucmat.2013.02.050 ↗
16. 10B area density: A novel approach for design and fabrication of B4C/6061Al neutron absorbing materials10.1016/j.jnucmat.2017.02.020 ↗
17. Fabrication and characterization of stir casting AA6061-31%B4C composite10.1016/S1003-6326(16)64322-4 ↗
18. Microstructure and mechanical properties of (B4C+Al2O3)/Al composites designed for neutron absorbing materials with both structural and functional usages
19. Manufacturing B4C-Al dispersion absorber plates using the picture-frame technique10.1016/j.net.2025.103555 ↗
20. Temperature-dependent corrosion behavior of the amorphous steel in simulated wet storage environment of spent nuclear fuels10.1016/j.corsci.2021.109529 ↗
21. Unveiling the pitting corrosion mechanism of borated stainless steel in the wet storage environment of spent nuclear fuels10.1016/j.actamat.2023.119477 ↗
22. The design, microstructure and mechanical properties of a novel Gd2O3/6061Al neutron shielding composite10.1016/j.vacuum.2019.01.004 ↗
23. Microstructure, mechanical and corrosion property of neutron and γ-ray shielding (Gd2O3+W)/Al composites10.1016/j.ceramint.2024.07.461 ↗
24. A novel (B4Cp+Gd)/Al6061 neutron absorber material with desirable mechanical properties
25. Microstructure evolution and strengthening mechanism of Gd2O3/6061Al neutron shielding composite during rolling10.1016/j.vacuum.2019.109098 ↗
26. Advanced neutron and ray shielding characteristic of nanostructured (90-x)Al-xGd2O3 composites reinforced by tungsten10.1016/j.jallcom.2024.177372 ↗
27. A review on combustion behavior and mechanism of Ti alloys for advanced aero-engine10.1016/j.jallcom.2023.170584 ↗
28. Current abvances of 3D printing Ti-based multi-metals for bone regeneration10.1080/17452759.2024.2399175 ↗
29. Recent developments and perspectives of Ti-based transition metal carbides/nitrides for photocatalytic applications: A critical review10.1016/j.mattod.2024.05.003 ↗
30. Markedly improved tensile property and corrosion resistance of ZTC4 titanium alloy by hot pressing10.1016/j.matlet.2023.135814 ↗
31. Corrosion behavior of neutron absorbing Ti-Gd alloys in simulated spent nuclear fuel pool water10.1016/j.corsci.2022.110776 ↗
32. Effect of gadolinium addition on the corrosion behavior and oxidation properties of titanium in boric acid solution at 50 °C10.1016/j.jmrt.2022.10.136 ↗
33. Mircotopography and mechanical properties of vacuum hot pressing Al/B4C composites10.1016/j.ceramint.2017.11.065 ↗
34. Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites10.1016/j.matdes.2011.02.033 ↗
35. The charge transfer reaction in Nyquist diagrams of painted steel10.1016/0010-938X(90)90206-K ↗
36. Corrosion behavior of bioinspired laminated Al matrix composite hybrid reinforced with B4C and graphene nanoplatelets10.1080/1478422X.2023.2182457 ↗
37. The effect of milling time, and sintering temperature and time on the microstructure-property relationship of aluminum-matrix hybrid composites
38. Effects of sintering temperature and time on defect evolution and compression properties of Ti-Al3Ti laminated composites10.1016/j.cja.2020.05.035 ↗
39. Markedly improved tensile property and corrosion resistance of ZTC4 titanium alloy by hot pressing10.1016/j.matlet.2023.135814 ↗
40. Understanding and improving powder metallurgical processes10.1533/9781845690946.2.471 ↗
41. Effects of grain size on the corrosion resistance of wrought magnesium alloys containing neodymium10.1016/j.corsci.2012.01.021 ↗
42. Corrosion behavior of B4C/6061Al neutron absorber composite in different H3BO3 concentration solutions10.1007/s40195-016-0474-2 ↗