journal article·2025-09Open access

Phase transformation optimization from boehmite to γ-Al2O3 and duplex microstructure: γ-/δ-Al2O3 to enhance the catalytic applications of 3D-printed scaffolds

G. Cruz, F. Quirós, I. Serrano, L. Franco, G. Fargas, J. Llorca, J.J. Roa

Abstract

Direct Ink Writing (DIW) was used to fabricate ceramic scaffolds with tailored geometries and porosity for catalytic applications. The thermal conversion of boehmite (AlOOH) to γ -alumina ( γ -Al₂O₃) was studied to optimize sintering for a γ -/ δ -Al₂O₃ duplex microstructure. Ceramic inks (20–35 wt.% solids) with Pluronic F-127® were 3D-printed and treated at 450-600 °C. Complete AlOOH-to- γ -Al₂O₃ transformation occurred at 450 ºC with structural integrity. Scaffolds showed 10-12% shrinkage, porosity, and mechanical properties comparable to Cold Isostatic Pressing. In ethanol dehydration, γ -/ δ -Al₂O₃ scaffolds sintered at 600 ºC achieved ~95% ethanol conversion and higher ethylene yield versus ~10% for γ -Al₂O₃-only scaffolds at 450 ºC.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Sol-gel derived boehmite nanostructures is a versatile nanoplatform for biomedical applications
2. The utilized of aluminium (Al) for boehmite as catalyst: brief review10.22271/reschem.2023.v4.i2a.95 ↗
3. Hydrothermal synthesis of boehmite in cellular alumina monoliths for catalytic and separation applications10.1016/j.jeurceramsoc.2015.04.040 ↗
4. Influences of ph value on the microstructure and phase transformation of aluminum hydroxide10.1016/j.powtec.2008.11.008 ↗
5. High surface area, nanostructured boehmite and alumina catalysts: synthesis and application in the sustainable epoxidation of alkenes10.1016/j.apcata.2018.12.017 ↗
6. Boehmite and gibbsite nanoplates for the synthesis of advanced alumina products
7. Morphology and surface properties of boehmite (γ-AlOOH): a density functional theory study10.1006/jcat.2001.3246 ↗
8. Mechanical properties of boehmite evaluated by atomic force microscopy experiments and molecular dynamic finite element simulations10.1155/2016/5017213 ↗
9. A review of current knowledge and future trends in polymer/boehmite nanocomposites10.1177/87560879211043558 ↗
10. James · 2008 · 1
11. γ-Alumina as a support for catalysts: a review of fundamental aspects10.1002/ejic.200500348 ↗
12. The microstructure of γ-alumina10.3390/en14206472 ↗
13. Control of the γ-alumina to α-alumina phase transformation for an optimized alumina densification10.1016/j.bsecv.2016.10.001 ↗
14. Structure of boehmite-derived γ-alumina and its transformation mechanism revealed by electron crystallography
15. Effect of divalent cation additives on the γ-Al2O3-to-α-Al2O3 phase transition10.1111/j.1151-2916.2000.tb01296.x ↗
16. Fabrication of low cost fine-grained alumina powders by seeding for high performance sintered bodies10.1016/S0955-2219(03)00226-7 ↗
17. Thermal analysis of phase transformation kinetics in α-Al2O3 seeded boehmite and γ-Al2O310.1016/S0040-6031(98)00343-8 ↗
18. Chemical etching optimization of 3D printed α-Al2O3 monoliths to enhance the catalytic applications10.1016/j.jeurceramsoc.2024.05.006 ↗
19. Production of gamma alumina using plasma-treated aluminum and water reaction byproducts10.3390/ma13061300 ↗
20. Alumina from reprocessing of spent hydroprocessing catalyst10.1016/j.cattod.2011.07.001 ↗
21. Catalytic dehydration of ethanol to ethylene and diethyl ether over alumina catalysts containing different phases with boron modification10.1007/s10934-018-0663-7 ↗
22. Ethanol dehydration and dehydrogenation on γ-Al2O3: mechanism of acetaldehyde formation10.1021/cs501239x ↗
23. 3D printing in heterogeneous catalysis—the state of the art10.3390/ma13204534 ↗
24. Recent advances in 3D printing for catalytic applications10.1016/j.cej.2021.134341 ↗
25. Optimization of the sintering thermal treatment and the ceramic ink used in direct ink writing of α-Al2O3: characterization and catalytic application10.1016/j.jeurceramsoc.2022.01.032 ↗
26. Deposition of γ-Al2O3 layers on structured supports for the design of new catalytic reactors10.1016/j.apcata.2005.03.028 ↗
27. Revolutionizing monolithic catalysts: the breakthroughs of design control through Computer-Aided-Manufacturing10.1002/admt.202400064 ↗
28. Advanced manufacturing in heterogeneous catalysis
29. Robocasting of structural ceramic parts with hydrogel inks10.1016/j.jeurceramsoc.2016.03.001 ↗
30. The intercept method—2. determination of spatial grain size10.1016/S1359-6454(96)00198-X ↗
31. Indentation size effect in ceramics: correlation with H/E10.1023/A:1024947210604 ↗
32. A comparative study of indentation size effect models for different materials10.1038/s41598-024-71136-5 ↗
33. Alpha alumina formation in Alum-Derived gamma alumina10.1111/j.1151-2916.1982.tb10511.x ↗
34. A study of commercial transition aluminas and of their catalytic activity in the dehydration of ethanol10.1016/j.jcat.2013.11.010 ↗