Natural oxidation process of magnetic LTP in MnBi alloys. Challenges and issues for preserving the magnetic phase
Source abstract
Abstract
The low-temperature phase (LTP) of MnBi alloy is considered a promising low-cost magnetic material, yet its practical application is hindered by challenges in the manufacturing process and susceptibility to oxidation. The alloy manufacturing process presents challenges, primarily due to the peritectic reaction to the alloying process of Mn and Bi. A controversial issue of the LTP phase currently is attributed to the presence of Bi, Mn and MnO as a consequence of alloy processing and its phase transition at temperatures over 355 °C. In this work, we investigate the natural oxidation behaviour of LTP-MnBi by analysing various types of samples over a 4-week period. Additionally, in order to enhance the oxidation resistance of the LTP, 3 types of protective coatings were tested against natural corrosion in MnBi samples. The oxidation state and the impact on the structural and magnetic properties of the alloy were closely monitored, and the results indicated a drop up to 55% in magnetization values. Our findings provide new insights into the oxidation mechanism of LTP-MnBi, challenge the existing idea that the increase in Bi content is solely due to the phase transition, and highlight the need for improved protective strategies to extend the lifespan and effectiveness of MnBi-based magnets.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties of Alloys · Metallic Glasses and Amorphous Alloys · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Optimizing composition in MnBi permanent magnet alloys10.1016/j.actamat.2019.10.003 ↗
2. Preparation of highly pure α-MnBi phase via melt-spinning10.1063/1.5006491 ↗
3. Microstructure and magnetic properties of MnBi alloys with high coercivity and significant anisotropy prepared by surfactant assisted ball milling10.1016/j.jmmm.2018.10.052 ↗
4. Effect of phase purity on enhancing the magnetic properties of Mn-Bi alloy10.1016/j.jmmm.2020.167344 ↗
5. Magnetic properties of the MnBi intermetallic compound10.1063/1.1405434 ↗
6. Binary alloy phase diagrams
7. Effect of composition and heat treatment on MnBi magnetic materials10.1016/j.actamat.2014.07.034 ↗
8. The magnetic and crystallographic properties of MnBi studied by neutron diffraction10.3891/acta.chem.scand.21-1543 ↗
9. Low-temperature MnBi alloys: electronic and magnetic properties, constitution, morphology and fabrication (Review article)10.1063/10.0000360 ↗
10. Facile method of raising the LTP content in Mn-Bi alloys by using sequential separation techniques for bi and mn
11. Effects of intergranular phase on the coercivity for MnBi magnets prepared by spark plasma sintering10.1063/1.5019870 ↗
12. Development of MnBi permanent magnet: neutron diffraction of MnBi powder10.1063/1.4867230 ↗
13. BiMn: synthesis, separation by centrifugation, and characterization10.1016/j.jallcom.2018.01.235 ↗
14. The introduction of super-gravity into optimization separation of bismuth and zinc from crude bismuth melt10.1016/j.cep.2020.108266 ↗
15. Thermal stability of MnBi magnetic materials10.1088/0953-8984/26/6/064212 ↗
16. Effect of oxidation on perpendicular magnetic behavior of MnBi thin films10.1016/j.jallcom.2016.01.240 ↗
17. Influence of glycine addition on formation and magnetic properties of MnBi prepared by vacuum sintering technique10.1088/1742-6596/2431/1/012063 ↗
18. Evolution and degradation of magnetic MnBi phase10.1063/1.5048873 ↗
19. Nanostructured bulk MnBi magnets fabricated by hot compaction of cryomilled powders10.1088/0022-3727/46/26/265001 ↗
20. Structural and magnetic properties of bulk MnBi permanent magnets
21. Manganese-based permanent magnet materials10.1016/j.pmatsci.2021.100872 ↗
22. Wyckoff · 1963 · 85
23. Properties of MnBi compounds partially substituted with cu, zn, ti, sb, and te. Ii. stability and magnetooptic properties of thin films10.1002/pssa.2210350110 ↗
24. The crystal structure of bi and of solid solutions of pb, sn, sb and te in bi10.1107/S0365110X62002297 ↗
25. A refinement of the parameters of α-manganese10.1107/S0365110X67001689 ↗
26. An investigation on oxidation of crystal surfaces with electron diffraction method, II.- copper single crystals
27. X-ray measurement of scattering factors of manganese and oxygen atoms in manganous oxide10.1143/JPSJ.17.1022 ↗
28. The crystal structure of α-Bi2O310.3891/acta.chem.scand.24-0384 ↗
29. Effect of sb substitution on crystal structure, texture and hard magnetic properties of melt-spun MnBi alloys10.1016/j.jallcom.2019.03.407 ↗
30. Bi to β-Bi2O3 thin films transformation by thermal oxidation in air at low temperature10.1016/j.matchemphys.2022.126685 ↗