Enhancing magnetic properties and corrosion resistance of sintered Nd-Fe-B magnet with Dy and Ga additions by adjusting boron content
Source abstract
Abstract
The effects of B content on the magnetic properties, corrosion resistance and microstructure of sintered Nd-Fe-B magnet containing Dy and Ga are studied in this work. As the B content increases from 0.88 wt% to 0.94 wt%, the intrinsic coercivity ( H cj ) of magnet increases at first and then decreases. The H cj exhibits a peak value of 22.19 kOe at 0.92 wt% B, accompanied by the remanence ( B r ) of 13.43 kGs and the maximum magnetic energy product ( BH ) max of 43.83 MGOe. When the B content is 0.92 wt%, the grain boundary phase (GBP) between the main phase grains simultaneously attains the widest width and the lowest Fe content, which effectively improves the demagnetization exchange coupling between the adjacent grains. Meanwhile, the RE 6 Fe 13 Ga and Ia 3-RE 2 O 3 phases in this magnet exhibit a small lattice misfit with adjacent main phase, which helps to reduce the nucleation of reverse domains at the GBs. The corrosion resistance of magnet can be enhanced by increasing the B content, as evidenced by the elevation in open circuit potential, the decrease in corrosion current density, and the increase in charge transfer resistance in 3.5 wt% NaCl solution. The magnet with 0.94 wt% B exhibits optimal corrosion resistance. By optimizing the B content in sintered Nd-Fe-B magnet with 1.8 wt% Dy and 0.5 wt% Ga, an intrinsic coercivity comparable to that of magnets containing 3–5 wt% Dy and 0.91–0.98 wt% B can be achieved, while the corrosion resistance is also enhanced to a level comparable to that of magnets containing 6–7 wt% Dy and 1 wt% B.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties of Alloys · Magnetic Properties and Applications · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Sagawa · 2022 · 135
2. Optimized microstructure and improved magnetic properties of B-lean hot deformed Nd-Fe-B magnets by Ga doping10.1016/j.intermet.2025.108676 ↗
3. Application of TbF3 Nano-powders by sand milling process in preparing high performance grain boundary diffusion Nd-Fe-B magnets
4. Magnetization measurements for grain boundary phases in Ga-doped Nd-Fe-B sintered magnet10.1016/j.jallcom.2018.04.055 ↗
5. Role of Ga on the high coercivity of Nd-rich Ga-doped Nd-Fe-B sintered magnet10.1016/j.jallcom.2019.03.114 ↗
6. Heavy rare earth-free high resistivity and coercivity Nd-Fe-B hot-deformed magnet developed by Pr-Cu diffusion and CaF2-LiF eutectic addition10.1016/j.jallcom.2024.177738 ↗
7. Most frequently asked questions about the coercivity of Nd-Fe-B permanent magnets10.1080/14686996.2021.1916377 ↗
8. Optimizing Ce-doped Nd-Fe-B magnets for high-efficient grain boundary diffusion of Tb-Fe alloy10.1016/j.materresbull.2025.113302 ↗
9. Synergistic regulation and optimization of microstructure, coercivity, and thermal stability in sintered Nd-Fe-B magnets through grain boundary diffusion of Dy and Al elements10.1016/j.jmrt.2024.12.235 ↗
10. Investigation on the corrosion behavior and mechanical properties of Nd-Fe-B magnets diffused by electrophoretic deposited TbF310.1016/j.jallcom.2024.177875 ↗
11. Comparison of microstructures and magnetic properties of Tb-Pr-Cu-Al and Tb-Nd-Cu-Al grain boundary diffused Nd-Fe-B magnets10.1016/j.jmrt.2025.01.137 ↗
12. Improving Tb diffusion and magnetic properties in fine-grained NdFeB magnet by Zr addition10.1016/j.matchar.2025.115016 ↗
13. Grain boundary phases in (Ga, Cu)-doped Nd-Fe-B sintered magnet10.1016/j.actamat.2024.120196 ↗
14. Relations of magnetic and electrochemical anti-corrosion properties of (Zr, Ti)-doped Nd-Ce-Fe-B magnets with Ti content10.1016/j.jmrt.2024.10.120 ↗
15. Analyzing the mechanism of reducing B content on the coercivity of sintered (Nd, Ce)-Fe-B magnets10.1016/j.matchar.2024.113908 ↗
16. Effects of grain boundary phase on coercivity of dysprosium-free rare earth magnet10.2320/matertrans.M2016160 ↗
17. Intergranular phase transformation in post-sinter annealed Nd-Dy-Fe-Cu-Ga-B magnet: From Ia3̅-cubic to I4/mcm-tetragonal structure10.1016/j.actamat.2024.120493 ↗
18. Influence of Ti addition on microstructure and magnetic properties of a heavy-rare-earth-free Nd-Fe-B sintered magnet10.1016/j.jallcom.2019.07.289 ↗
19. Effects and regulation mechanisms of post-sinter annealing treatment on magnetic properties and microstructures of Nd-Fe-B sintered magnets with varying boron contents
20. Adjusting microstructure and magnetic properties of (Misch Metal, Nd)-Fe-B sintered magnets by varying rare earth and boron contents10.1016/j.jmmm.2024.172384 ↗
21. Nd2Fe17 nanograins effect on the coercivity of HDDR Nd-Fe-B magnets with low boron content10.1007/s12613-012-0544-z ↗
22. Effect of B content on sintering behavior of Nd-Fe-B ternary alloy powder10.2320/matertrans1989.35.473 ↗
23. Significant progress of grain boundary diffusion process for cost-effective rare earth permanent magnets: a review10.1016/j.matdes.2021.110004 ↗
24. High performance and exchange coupling in magnetization reversal of sintered (Nd,Dy)-Fe-B magnets10.1016/j.jallcom.2022.166944 ↗
25. Sintered Nd-Fe-B magnet with core-shell structures fabricated through the intergranular addition of ultra-fine as-disproportionated (Nd, Dy)-Fe-B-Cu powder10.1007/s10854-020-03293-y ↗
26. Magnetic performances and diffusion shell-structures of Nd-Fe-B sintered magnets treated with grain boundary diffusion by low Dy-content multi-component alloys10.1016/j.jallcom.2025.178487 ↗
27. Corrosion resistance of molybdate and phosphate composite passivation film on Zn-plated sintered Nd-Fe-B magnets10.1016/j.apsusc.2025.162543 ↗
28. Phosphate coatings on magnesium alloy AM60: Part 2: electrochemical behaviour in borate buffer solution
29. Alloying Pr-Tb-Cu diffusion source with Ni for enhancing both coercivity and corrosion resistance of Nd-Fe-B magnets10.1016/j.jallcom.2022.165049 ↗
30. Effects of fluoride on the structure and properties of microarc oxidation coating on aluminium alloy10.1016/j.jallcom.2010.06.027 ↗
31. Towards peculiar corrosion behavior of multi-main-phase Nd-Ce-Y-Fe-B permanent material with heterogeneous microstructure10.1016/j.corsci.2020.108972 ↗
32. Corrosion characterization of Mg-8Li alloy in NaCl solution10.1016/j.corsci.2009.03.011 ↗
33. Dy-based dual-alloy grain boundary diffusion for sintered Nd-Fe-B magnets with improved magnetic performance and corrosion resistance10.1016/j.matchar.2022.112319 ↗
34. A study on the Nd-rich phase evolution in the Nd-Fe-B sintered magnet and its mechanism during post-sintering annealing10.1016/j.jallcom.2012.05.075 ↗
35. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
36. The influence of Co and Ga additions on the corrosion behavior of nanocrystalline NdFeB magnets10.1016/S0010-938X(01)00163-9 ↗
37. Enhancing the grain boundary diffusion efficiency of Tb for Nd-Fe-B magnets using dual-alloy diffusion source10.1016/j.jmrt.2022.03.016 ↗
38. Investigation of domain wall pinning effect induced by annealing stress in sintered Nd-Fe-B magnet10.1016/j.jallcom.2015.04.017 ↗
39. Influence of dysprosium substitution on magnetic and mechanical properties of high intrinsic coercivity Nd-Fe-B magnets prepared by double-alloy powder mixed method10.1016/S1002-0721(16)60080-7 ↗
40. Magnetic properties evolution with grain boundary phase transformation and their growth in Nd-Fe-Cu-Ga-B sintered magnet during post-sinter annealing process10.1016/j.intermet.2021.107303 ↗
41. Unveiling the origin of the large coercivity in (Nd, Dy)-Fe-B sintered magnets10.1038/s41427-023-00498-5 ↗
42. The influence of Gallium doping on the magnetic performance and microstructure of Nd-Fe-B sintered magnets10.1016/j.jmmm.2022.169242 ↗
43. Optimizing microstructure, magnetic properties and mechanical properties of sintered Nd-Fe-B magnet by double alloy method and grain boundary diffusion
44. Diffusion behavior of heavy rare-earths for grain boundary engineering of sintered Nd-Fe-B-based permanent magnets produced by the 2-powder method10.1016/j.actamat.2024.119871 ↗
45. High-temperature magnetic performance and corrosion resistance of hot-deformed and sintered Nd-Fe-B magnets with similar room-temperature magnetic properties10.1016/j.jmmm.2023.171321 ↗
46. Effect of Dy2O3 intergranular addition on thermal stability and corrosion resistance of Nd-Fe-B magnets10.1016/j.intermet.2014.07.020 ↗
47. Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets10.1016/j.jallcom.2016.09.058 ↗
48. Influence of dysprosium addition on corrosion behavior of Nd-Fe-B magnets10.1108/ACMM-05-2024-3016 ↗