Fabrication of single-crystal long wires of Ru60Mo15W25 alloy and anisotropy of electrical and thermal properties
Source abstract
Abstract
Ru-Mo-W alloy (Ruscaloy) single-crystal wires demonstrate high-efficiency vacuum deposition for fabricating organic light-emitting diodes, providing a promising alternative to conventional polycrystalline Ta heaters. In this study, long Ru 60 Mo 15 W 25 wires were fabricated using the dewetting micro-pulling-down (μ-PD) method to investigate their electrical and thermal properties. Due to the capillary-based solidification mechanism, the wires retained a uniform composition along their length (>30 m). Electrical resistivity measurements, the calculated thermal expansion coefficient, and indentation tests revealed anisotropic properties of the wires: the c-axis generally exhibited larger electrical resistivity and thermal expansion than the basal plane directions. First-principles calculations were performed to evaluate the effects of Mo and W concentration and temperature on electrical resistivity and electronic thermal conductivity. The calculated resistivity values agreed with experimental data with deviations within approximately 15 %, indicating that the computational approach effectively complements experiments. Overall, these findings provide a solid foundation for optimizing the design and application of Ru 60 Mo 15 W 25 single-crystal wires as high-temperature resistive heaters. • Continuous dewetting μ-PD method enabled meter-scale single-crystal Ru60Mo15W25 wires. • Minimal compositional variation and tunable crystal orientation achieved by adjusting pulling rate. • Anisotropic electrical resistivity, thermal expansion, and mechanical properties elucidated. • First-principles calculations reveal composition- and temperature-dependent transport properties. • Potential applications in resistive heaters for OLED fabrication and wire-based additive manufacturing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Investigation of crystal shape controllability in the micro-pulling-down method for low-wettability systems10.1021/acsomega.0c05913 ↗
2. Fabrication of flexible Ir and Ir-Rh wires and application for thermocouple10.1016/j.jcrysgro.2018.01.018 ↗
3. High-toughness/resistivity ruthenium-based refractory alloy wires10.1016/j.ijrmhm.2023.106235 ↗
4. Mechanical and thermoelectric properties of iridium-ruthenium alloy grown by the micro-pulling-down method10.1016/j.jcrysgro.2021.126256 ↗
5. Effects of crystal growth rate and pressure on shape controllability in the dewetting micro-pulling-down method10.1016/j.jcrysgro.2023.127565 ↗
6. Thermal properties of tantalum between 300 and 2300 K10.1023/A:1022659005050 ↗
7. Electrical resistivity of selected elements
8. Measurement of thermophysical properties by a pulse-heating method: thoriated tungsten in the range 1200 to 3600 K10.1007/BF01458839 ↗
9. Multilayer white light-emitting organic electroluminescent device10.1126/science.267.5202.1332 ↗
10. Fabrication of highly efficient organic electroluminescent devices10.1063/1.122570 ↗
11. Solution-processed organic light-emitting devices with two polymer light-emitting units connected in series by a charge-generation layer10.1039/c2jm35344j ↗
12. Review of molecular engineering for horizontal molecular orientation in organic light-emitting devices10.1246/bcsj.20180336 ↗
13. Electronic transport properties of ruthenium and ruthenium dioxide thin films
14. The resistivity of scandium single crystals10.1016/0022-5088(71)90140-8 ↗
15. Volkenshteyn · Fiz. Met. Met. · 1978 · 45 · 1187
16. Metals: Electronic Transport Phenomena
17. Empirical electron-phonon coupling constants and anisotropic electrical resistivity in hcp metals10.1103/PhysRevB.40.6037 ↗
18. 2017
19. Fukuda · 2007
20. Single crystal growth of submillimeter diameter sapphire tube by the micro-pulling down method10.1016/j.jcrysgro.2018.03.023 ↗
21. Single crystal growth and luminescent properties of Tb doped GdTaO4 by the μ-pulling down method10.1016/j.optmat.2018.05.031 ↗
22. Tailoring scintillation and luminescence through co-doping engineering: A comparative study of Ce,Tb co-doped YAGG and GAGG garnet crystals10.1016/j.jallcom.2024.176550 ↗
23. Feasibility study of one-dimensional imaging with an optical fiber for radiation dose-rate monitoring system in the decommissioning process10.1088/1748-0221/19/02/C02053 ↗
24. Optical and scintillation properties of Pr3+ -doped (La,Y)2Si2O7 single crystals
25. Growth and optical properties of Pr,Yb-codoped KY3F10 fluoride single crystals for up-conversion visible luminescence10.1016/j.jcrysgro.2006.10.220 ↗
26. Crystal growth of Ce:PrF3 by micro-pulling-down method10.1016/j.jcrysgro.2004.06.038 ↗
27. Effect of Zr addition on magnetostriction of Tb-Dy-Te alloys prepared by micro-pulling-down method
28. Fabrication of metallic fibers with high melting point and poor workability by unidirectional solidification10.1002/adem.201700506 ↗
29. Luminescence properties of Pr-doped (La,Gd)2Si2O7 grown by the floating zone method10.7567/JJAP.54.052401 ↗
30. Scintillation properties of Zr co-doped Ce:(Gd,La)2Si2O7 grown by the Czochralski process10.1016/j.radmeas.2016.02.019 ↗
31. Metal alloy fibers
32. Pd−In−Fe shape memory alloy10.1063/1.2749440 ↗
33. Shaped crystal growth of Fe–Al alloy plates by micro pulling down method10.12693/APhysPolA.137.1009 ↗
34. Elastic and superelastic properties of NiFeCoGa fibers grown by micro-pulling-down method10.2320/matertrans.M2009013 ↗
35. Fast Korringa-Kohn-Rostoker coherent potential approximation and its application to FCC Ni-Fe systems10.1088/0953-8984/1/43/006 ↗
36. Automatic exhaustive calculations of large material space by Korringa-Kohn-Rostoker coherent potential approximation method applied to equiatomic quaternary high entropy alloys
37. First-principles calculation of transition-metal Seebeck coefficients10.1016/j.ssc.2018.02.018 ↗
38. Solution of the Schrödinger equation in periodic lattices with an application to metallic lithium10.1103/PhysRev.94.1111 ↗
39. On the calculation of the energy of a Bloch wave in a metal10.1016/0031-8914(47)90013-X ↗
40. Application of the coherent potential approximation to a system of muffin-tin potentials10.1103/PhysRevB.2.4715 ↗
41. A reformulation of the coherent potential approximation and its applications10.1143/PTP.46.77 ↗
42. Resistivity, Seebeck coefficient, and thermal conductivity of platinum at high pressure and temperature10.1103/PhysRevB.100.214302 ↗
43. Calculating linear-response functions for finite temperatures on the basis of the alloy analogy model10.1103/PhysRevB.91.165132 ↗
44. Theory of electronic transport in random alloys: Korringa-Kohn-Rostoker coherent-potential approximation10.1103/PhysRevB.31.3260 ↗
45. First-principles calculation of the Gilbert damping parameter via the linear response formalism with application to magnetic transition metals and alloys10.1103/PhysRevB.87.014430 ↗
46. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
47. Linear methods in band theory10.1103/PhysRevB.12.3060 ↗
48. Mechanism of the growth pattern formation and three-dimensional morphological transition of hcp magnesium alloy dendrite
49. Correlation between crystallographic anisotropy and dendritic orientation selection of binary magnesium alloys10.1038/s41598-017-12814-5 ↗
50. Orientation selection in solidification patterning10.1016/j.actamat.2011.10.006 ↗
51. Simulation of unidirectional solidification with a tilted crystalline axis10.1103/PhysRevE.54.650 ↗
52. Thermodynamic properties of ruthenium and osmium10.1134/S0018151X21040167 ↗