Effect of peak stress and dwell time on the fatigue damage behavior of Ti-22Al-23Nb-2(Mo, Zr) alloy with lamellar microstructure
Source abstract
Abstract
Ti 2 AlNb alloy is one of the candidate high strength titanium alloy materials under consideration for compressor disc, which will endure dwell loading at high peak stress level during service. In this work, low cycle fatigue (LCF) and low cycle dwell fatigue (LCDF) deformation behaviors and damage mechanism of Ti 2 AlNb alloy with lamellar microstructure under high loading level were investigated. The results show that fatigue life is highly dependent on the peak stress ( σ peak) and dwell time ( t dwell). With increasing the σ peak , the LCF life decreases gradually since higher loading stress can accelerate plastic strain accumulation and lead to faster crack propagation. When at the same σ peak, the LCDF life is lower than the LCF life due to greater plastic strain accumulation caused by dwell effect, indicating a dwell life debit of the Ti 2AlNb alloy. Moreover, dwell fatigue sensitivity exhibits an increasing trend as the t dwell increases. Under different loading waveforms, the fractography shows remarkably different features. Crack source of LCF appears on sample surface, while crack source of LCDF appears on surface and sub-surface of sample. The research of LCDF behavior is relevant to aviation industry to prevent premature failure of rotating components made of Ti 2AlNb alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Microstructure evolution and mechanical properties of a high-strength Ti2AlNb alloy processed by large-strain two-pass hot extrusion10.1016/j.jallcom.2022.166715 ↗
2. Investigation on the size and distribution effects of O phase on fracture properties of Ti2AlNb superalloy by using image-based crystal plasticity modeling10.1016/j.msea.2021.140787 ↗
3. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
4. Influence of hold time on dwell fatigue behavior in IMI834 disc forging10.1007/s11837-022-05400-2 ↗
5. Crystallographic analysis of slip system activation in bimodal Ti-6Al-3Nb-2Zr-1Mo alloy under various dwell-fatigue loadings10.1016/j.msea.2023.144610 ↗
6. A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions10.1016/S0142-1123(03)00145-2 ↗
7. On rate-dependent polycrystal deformation: the temperature sensitivity of cold dwell fatigue
8. Crack initiation mechanisms in Ti-6Al-4V subjected to cold dwell-fatigue, low-cycle fatigue and high-cycle fatigue loadings10.1016/j.actamat.2022.118560 ↗
9. The influence of alloying on slip intermittency and the implications for dwell fatigue in titanium10.1038/s41467-022-33437-z ↗
10. Crystal plasticity analysis of temperature-sensitive dwell fatigue in Ti-6Al-4V titanium alloy for an aero-engine fan disc10.1016/j.ijfatigue.2021.106688 ↗
11. Predicting dwell fatigue life in titanium alloys using modelling and experiment10.1038/s41467-020-19470-w ↗
12. High-strength and low-dwell-sensitivity titanium alloy showing high tolerance to microcracking under dwell fatigue condition10.1016/j.ijplas.2022.103449 ↗
13. Dwell time effects on the fatigue behaviour of titanium alloys10.1016/0142-1123(88)90001-1 ↗
14. Study on the time-dependant fracture behavior of Ti2AlNb based alloy10.1016/S0921-5093(02)00367-2 ↗
15. Local deformation patterns in Ti-6Al-4V under tensile, fatigue and dwell fatigue loading10.1016/j.ijfatigue.2012.03.001 ↗
16. Microstructural and load hold effects on small fatigue crack growth in α+β dual phase Ti alloys10.1016/j.ijfatigue.2021.106699 ↗
17. Study on creep-fatigue mechanical behavior and life prediction of Ti2AlNb-based alloy10.3390/ma15186238 ↗
18. On cold dwell facet fatigue in titanium alloy aero-engine components10.1016/j.ijfatigue.2016.11.034 ↗
19. Deformation modes investigation during ex-situ dwell fatigue testing in a bimodal near-α titanium alloy10.1016/j.ijfatigue.2022.107098 ↗
20. Effect of thermomechanical processing on the dwell fatigue behaviour of near alpha titanium alloy IMI 83410.1007/s11837-022-05547-y ↗
21. Experimental investigation on dwell-fatigue property of Ti-6Al-4V ELI used in deep-sea manned cabin10.1016/j.msea.2015.06.089 ↗
22. Dwell fatigue behavior of two-phase Ti-6Al-4V alloy at moderate temperature10.1007/s11837-022-05461-3 ↗
23. On the mechanism of fatigue and dwell-fatigue crack initiation in Ti-6Al-4V10.1016/j.scriptamat.2020.03.031 ↗
24. The effect of hold time on the fatigue properties of a β-processed titanium alloy10.1007/BF02811727 ↗
25. Microstructural effects on thermal-mechanical alleviation of cold dwell fatigue in titanium alloys10.3390/cryst12020208 ↗
26. Low-cycle dwell-time fatigue in Ti-624210.1007/s11661-999-0246-y ↗
27. Dwell-sensitive fatigue under biaxial loads in the near-alpha titanium alloy IMI68510.1016/0142-1123(94)90194-5 ↗
28. High-strength and low-dwell-sensitivity titanium alloy showing high tolerance to microcracking under dwell fatigue condition10.1016/j.ijplas.2022.103449 ↗
29. A comparative study on dwell fatigue of Ti-6Al-2Sn-4Zr-xMo (x = 2 to 6) alloys on a microstructure-normalized basis10.1007/s11661-014-2541-5 ↗
30. Effects of α+β phase deformation on microstructure, fatigue and dwell fatigue behavior of a near alpha titanium alloy10.1016/j.ijfatigue.2016.05.023 ↗
31. Size effect on the fatigue behaviour of IMI829 titanium alloy under dwell conditions10.1016/0142-1123(89)90002-9 ↗
32. Dwell sensitive fatigue in a near alpha titanium alloy at ambient temperature10.1016/S0142-1123(97)00020-0 ↗
33. Dwell and normal cyclic fatigue behaviours of Ti60 alloy10.1016/j.jmst.2013.10.010 ↗
34. The effect of dwell loading on the strain accumulation behavior of titanium alloys10.1016/S0142-1123(97)00137-0 ↗
35. Comparison of slip system activation in Ti-6Al-2Sn-4Zr-2Mo and Ti-6Al-2Sn-4Zr-6Mo under tensile, fatigue and dwell-fatigue loadings10.1016/j.msea.2017.05.021 ↗
36. The role of dwell hold on the dislocation mechanisms of fatigue in a near alpha titanium alloy10.1016/j.ijplas.2020.102743 ↗
37. Effects of intermittent loading time and stress ratio on dwell fatigue behavior of titanium alloy Ti-6Al-4V ELI used in deep-sea submersibles10.1016/j.jmst.2020.10.063 ↗
38. Effect of rise and fall time on dwell fatigue behavior of a high strength titanium alloy10.3390/met9080914 ↗
39. Dwell fatigue and cycle deformation of CP-Ti at ambient temperature10.1016/j.matdes.2015.01.007 ↗
40. Low-cycle fatigue behavior and property of TA15 titanium alloy with tri-modal microstructure10.1016/j.msea.2018.08.080 ↗
41. Effect of shot peening on fatigue performance of Ti2AlNb intermetallic alloy10.1016/j.ijfatigue.2019.05.034 ↗