journal article·2024-09Open access

Quantification of the physical, microstructural, thermal, and mechanical properties of PZT-reinforced Ti-based composites

Y. Alshammari, F. Yang, L. Bolzoni

Abstract

This work proposes the development of lead zirconate titanate (PZT)-reinforced titanium (Ti)-based composites as the addition of piezoceramics to metals could be used to functionalize them. The effects induced by the addition of different PZT concentrations (1–10 wt%) to the Ti matrix were, therefore, characterized on PZT-reinforced Ti-based composites manufactured via press and sinter. It was found that both the relative green and sintered density of the composites decreases with the progressive addition of a greater amount of PZT. Sintering of the intimate Ti/PZT mixtures also leads to some PbO volatilization (which is limited by the surrounding matrix), modification of the features of the residual porosity, and the partial dissolution of the PZT powder particles, resulting in the transformation of the equiaxed microstructure of Ti to lamellar. The initial addition of PZT increases the tensile strength by approx. 18 % but the tensile properties are deteriorated by subsequent additions of PZT. • The development of PZT-reinforced Ti-based composites was investigated. • The progressive addition of a greater amount of PZT to Ti affects the processability. • The initial addition of PZT to Ti increases the tensile strength.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Lütjering · 2007
2. C. Cui, B. Hu, L. Zhao, S. Liu, Titanium alloy production technology, market prospects and industry development, 32 (2011) 1684-1691.10.1016/j.matdes.2010.09.011 ↗
3. Effect of Mn on the properties of powder metallurgy Ti-2.5Al-xMn alloys10.3390/ma16144917 ↗
4. Processing and properties of titanium–titanium boride (TiBw) matrix composites—a review10.1007/s10853-006-0776-2 ↗
5. Investigation of the Young's modulus of TiB needles in situ produced in titanium matrix composite10.1016/S0921-5093(02)00188-0 ↗
6. Characterisation of titanium–titanium boride composites processed by powder metallurgy techniques10.1016/j.matchar.2012.07.014 ↗
7. Role of powder metallurgical processing and TiB reinforcement on mechanical response of Ti–TiB composites10.1016/j.matlet.2014.12.126 ↗
8. Interaction between SiC and Ti powder10.1557/JMR.1993.2725 ↗
9. Interaction between titanium and SiC10.1007/BF01045749 ↗
10. Rapid synthesis of ternary carbide Ti3SiC2 through pulse-discharge sintering technique from Ti/Si/TiC powders10.1007/s11661-002-0320-1 ↗
11. Glory of piezoelectric perovskites
12. Additive manufacturing of piezoelectric materials10.1002/adfm.202005141 ↗
13. Synthesis and characterization of lead zirconate titanate (PZT) obtained by two chemical methods10.1016/j.ceramint.2013.07.068 ↗
14. The intrinsic piezoelectric properties of materials - a review with a focus on biological materials10.1039/D1RA03557F ↗
15. Composite piezoelectric spinal fusion implant: effects of stacked generators10.1002/jbm.b.33365 ↗
16. Theoretical study of the structure of lead zirconate–titanate PbZr0.6Ti0.4O310.3103/S1062873817090076 ↗
17. Structural electroactive cermets: dielectric and structural properties of conductive metallic reinforced piezoelectric ceramics10.1080/10408436.2019.1690422 ↗
18. Fabrication and evaluation of PZT/Pt piezoelectric composites and functionally graded actuators10.1016/S0955-2219(02)00407-7 ↗
19. Fabrication of Cu/PZT functionally graded actuators by spark plasma sintering10.4028/www.scientific.net/MSF.423-425.423 ↗
20. Sintering and piezoelectric properties of Co-fired lead zirconate titanate/Ag composites10.1111/j.1551-2916.2005.00849.x ↗
21. Fabrication and evaluation of PZT/Ag piezoelectric composites and graded actuator10.4028/b-3nsDlJ ↗
22. Control of PbO loss during sintering of PZT: laboratory vs industry
23. Liquid-phase sintering of PZT ceramics10.1016/S0955-2219(00)00089-3 ↗
24. The effect of α+ β forging on the mechanical properties and microstructure of binary titanium alloys produced via a cost-effective powder metallurgy route
25. Evaluation of reactive induction sintering as a manufacturing route for blended elemental Ti-5Al-2.5Fe alloy10.1016/j.jmatprotec.2018.01.013 ↗
26. 2008
27. Thermal analysis of the crystallization kinetics of lead zirconate titanate powders prepared via sol–gel route
28. The ZrO2-TiO2 phase diagram10.1007/s10853-005-1116-7 ↗
29. M. Cancarevic, Thermodynamic optimization of the PbO-ZrO2-TiO2 (PZT) system and its application to the processing of composites of PZT ceramics and copper, (2007).
30. Ternary Ti alloys functionalised with antibacterial activity10.1038/s41598-020-79192-3 ↗
31. Pores in ceramic processing
32. Mixed conduction and chemical diffusion in a Pb(Zr0.53, Ti0.47)O3 buried capacitor structure10.1063/1.3302452 ↗
33. Pb loss in Pb(Zr,Ti)O3 ceramics observed by in situ ionic conductivity measurements10.1063/1.3585831 ↗
34. Compaction and sintering kinetics of pzt nanopowder obtained from oxalate precursor
35. Diffusion in α-Ti and Zr10.2320/matertrans.44.2 ↗
36. Zr diffusion in α-Ti measured by RBS and HIRBS10.1016/0022-3115(94)90303-4 ↗
37. Diffusion of metallic impurities in zirconium and titanium(Heterodiffusion of metallic impurities in body- centered phases of doped zirconium and titanium, determining diffusion coefficients via radioactive isotopes)
38. Choudhary · 2017
39. Advancement in the pressureless sintering of CP titanium using high-frequency induction heating10.1007/s11661-019-05381-z ↗
40. Mechanical behaviour of induction sintered blended elemental powder metallurgy Ti alloys10.1016/j.msea.2020.140157 ↗
41. The Ti−Zr (Titanium-Zirconium) system10.1007/BF02881478 ↗
42. The Pb-Ti (lead-titanium) system10.1007/BF02868325 ↗
43. Surface decomposition of strontium-doped soft PbZrO3–PbTiO310.1111/j.1151-2916.2002.tb00067.x ↗
44. Synthesis and formation mechanism of titanium lead carbide10.1007/s40145-018-0269-1 ↗
45. Engineering the heterogeneous Nuclei in Al-Si alloys for solidification control10.1016/j.apmt.2016.11.001 ↗
46. Investigation of the crystallization of lead titanate and lead zirconate titanate with X-ray diffraction and differential thermal analysis10.1002/bbpc.19981020807 ↗
47. Low temperature crystallization of lead zirconate titanate thin films by a sol-gel method10.1063/1.369362 ↗
48. Processing and seeding effects on crystallisation of PZT thin films from sol-gel method10.1016/S0955-2219(97)00027-7 ↗
49. PbO volatilization and annealing conditions investigation of Pb(Zr0. 52Ti0. 48)O3 thin films fabricated by sol–gel method10.1016/j.mseb.2005.07.021 ↗
50. Influence of PbO phase content on structural and optical properties of PZT nanopowders
51. Colloidal processing of Pb(Zr,Ti)O3 targets Part II – Effect of NbO2.5 additive
52. Effect of combined lean additions of isomorphous and eutectoid beta stabilisers on the properties of titanium10.1016/j.jmrt.2022.11.023 ↗