journal article·2026-05

Influence of ZrO2 on microstructure regulation and performance enhancement of silica-based ceramic cores via an in situ reaction pathway

Xue Cui, Xin Xie, Tongqi Zhang, Mingchen Shao, Zhisheng Nong, Absanov Akhmad, Jingchuan Zhu

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aerogels and thermal insulation · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Effect of zircon content on chemical and mechanical behavior of silica-based ceramic cores10.1016/j.ceramint.2013.06.108 ↗
2. Powder grading for enhanced properties in DLP 3D printed silica ceramic cores
3. Development of mullite-alumina ceramic shells for precision investment casting of single-crystal high-pressure turbine blades10.1016/j.ceramint.2022.06.124 ↗
4. Experimental study on mechanical properties of silica-based ceramic core for directional solidification of single crystal superalloy10.1016/j.ceramint.2017.09.189 ↗
5. Enhanced comprehensive properties of stereolithography 3D printed alumina ceramic cores with high porosities by a powder gradation design10.1016/j.jmst.2022.04.040 ↗
6. Effects of alumina on cristobalite crystallization and properties of silica-based ceramic cores10.1016/j.jmst.2016.02.012 ↗
7. Phase transformation-induced crack closure and evolution of high-temperature flexural strength in DLP-printed silica ceramic cores during cooling10.1016/j.jallcom.2026.187581 ↗
8. Tribological and thermomechanical behaviour of alumina-based hybrid nanocomposites10.1016/j.matchemphys.2025.130828 ↗
9. The effect of additives on properties of silica-based ceramic cores utilised in fabrication of multivane clusters for turbofan jet engine10.1016/j.ceramint.2022.05.241 ↗
10. Evaluated material properties for a sintered alpha-alumina10.1111/j.1151-2916.1997.tb03074.x ↗
11. A computational and experimental study on the effective properties of Al2O3-Ni composites10.1111/ijac.12674 ↗
12. Gelcasting of alumina based ceramic cores containing yttria for single crystal and directional solidification blades10.1179/174367609X422045 ↗
13. Alumina-zircon filler based ceramic shell moulds for directionally solidified cast shrouded low pressure turbine blades10.1016/j.ceramint.2021.06.161 ↗
14. Enhancing creep resistance performance in silica-based ceramic core materials through shell-core structure10.1016/j.jeurceramsoc.2024.05.067 ↗
15. Investigation of microstructure and properties in short carbon fiber reinforced silica-based ceramic cores via atmosphere sintering10.1016/j.jeurceramsoc.2021.07.015 ↗
16. Development of a new process in high functioning ceramic core without shape deformation10.1016/j.ceramint.2013.04.107 ↗
17. Microstructure, mechanical properties and thermal shock resistance of hot-pressed ZrO2(3Y)-BN composites10.1016/j.msea.2008.06.038 ↗
18. Creep mechanism of zircon-added silica ceramic cores formed by stereolithography10.1016/j.ceramint.2021.03.092 ↗
19. Impact of calcium silicate and titanium dioxide co-doping on the microstructure and bioactivity of 3D-printed 3Y-ZrO2 ceramics10.1016/j.ceramint.2025.10.264 ↗
20. The role of zircon particle size distribution, surface area and contamination on the properties of silica-zircon ceramic materials10.1016/j.jeurceramsoc.2011.03.005 ↗
21. Microstructural evolution in 8 mol% Y2O3-stabilized cubic zirconia (8YSCZ) with SiO2 addition10.1016/S0921-5093(04)01003-2 ↗
22. Fabrication of CaSiO3-doped 3Y-ZrO2 ceramics via DLP 3D printing: structural, mechanical, and biological evaluation10.1016/j.jallcom.2025.181895 ↗
23. Fused silica ceramic core based on network-structured zircon design via 3D printing10.1016/j.scriptamat.2021.114342 ↗
24. Compositional optimization of high-solid-loading ceramic cores via 3D printing
25. Influence of debinding parameter and nano-ZrO2 particles on the silica-based ceramic cores fabricated by stereolithography-based additive manufacturing10.1016/j.ceramint.2023.03.221 ↗
26. Effect of Al(OH)3 on the properties of silica-based ceramic cores prepared by laser powder bed fusion combined with vacuum infiltration
27. First principles calculation of intermetallic compounds in FeTiCoNiVCrMnCuAl system high entropy alloy10.1016/S1003-6326(11)61338-1 ↗
28. Young’s modulus prediction model for metal carbides based on first-principles calculations10.1016/j.matchemphys.2023.128137 ↗
29. Calculation of the flow limits of mixed crystals on the basis of the plasticity of monocrystals10.1002/zamm.19290090104 ↗
30. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
31. The impact of organic bentonite content on the properties of stereolithographic 3D-printed silicon-based ceramic core paste10.3390/ma18081855 ↗
32. Low viscosity high stability silicon carbide slurry for densification of SiC ceramic matrix composites10.1016/j.ceramint.2024.11.176 ↗
33. Effect of the sintering parameters on the structure and mechanical properties of zirconia-based ceramics10.1016/j.ceramint.2024.06.331 ↗
34. Critical evaluation and thermodynamic optimization of the CaO-ZrO2 and SiO2-ZrO2 systems10.1016/j.jeurceramsoc.2016.10.008 ↗
35. The formation of zircon from amorphous ZrO2 SiO2 powders10.1007/BF01152164 ↗
36. Low temperature synthesis of zircon from silicone resins and oxide nano-sized particles10.1016/j.jeurceramsoc.2011.11.028 ↗
37. Effect of ZrO2 types on ZrSiO4 formation10.1016/j.ceramint.2019.08.048 ↗
38. Formation of polycrystalline zircon (ZrSiO4) from amorphous silica and amorphous zirconia10.1016/0022-0248(92)90336-H ↗
39. New insights into the formation mechanism of zircon in a ZrO2-SiO2 nanocrystalline glass-ceramic: a TEM study10.1016/j.ceramint.2022.06.021 ↗
40. Data retrieved from the Materials Project for ZrSiO4 (mp-4820) from database version v2025.09.25. https://doi.org/10.17188/1208424.
41. Data retrieved from the Materials Project for SiO2 (mp-7000) from database version v2025.09.25. https://doi.org/10.17188/1272685.
42. Data retrieved from the Materials Project for ZrO2 (mp-2574) from database version v2025.09.25. https://doi.org/10.17188/1200956.
43. Data retrieved from the Materials Project for ZrO2 (mp-2858) from database version v2025.09.25. https://doi.org/10.17188/1202679.
44. Modelling the impact of configurational entropy on the stability of amorphous SiO2
45. Alloying effects of V on stability, elastic and electronic properties of TiFe2 via first-principles calculations10.1007/s11771-017-3560-3 ↗
46. Physical properties of zircon and scheelite lutetium orthovanadate: experiment and first-principles calculation10.1016/j.jssc.2013.07.006 ↗
47. Young’s modulus prediction model for metal carbides based on first-principles calculations10.1016/j.matchemphys.2023.128137 ↗
48. Structure, elasticity and stability of reidite (ZrSiO4) under hydrostatic pressure: a density functional study10.1016/j.matchemphys.2012.04.052 ↗
49. Elastic moduli of quartzversus hydrostatic pressure at 25℃ and -195.8℃10.1063/1.1703099 ↗
50. Density functional theory analysis of novel ZrO2 polymorphs: unveiling structural stability, electronic structure, vibrational and optical properties10.1016/j.commatsci.2024.113439 ↗
51. Structural, mechanical and thermodynamic properties of ZrO2 polymorphs by first-principles calculation10.1016/j.physb.2017.01.025 ↗
52. Toughening of (MgCoNiCuZn)O through addition of ZrO2(3Y) prepared by ultrafast high-temperature sintering10.1016/j.ceramint.2024.03.332 ↗
53. Formation and control of “intragranular” ZrO2 strengthened and toughened Al2O3 ceramics10.1016/j.ceramint.2019.12.080 ↗
54. Co-enhancement of vat photopolymerized 3D printed silica-based ceramic cores by cristobalite phase transformation and in-situ ZrSiO4 formation10.1016/j.jallcom.2025.183029 ↗
55. Microstructure evolution and toughening mechanism of Al2O3/YSZ directionally solidified eutectic ceramic10.1016/j.jallcom.2021.159760 ↗
56. Preparation of silica-based ceramic cores with low shrinkage and improved flexural strength regulated by metallic Zr powders10.1016/j.ceramint.2025.03.391 ↗