journal article·2026-03

Comparative high-strain-rate response and microstructural evolution of LPBF-fabricated A286 and Inconel 718 lattice structures under SHPB loading

D. Akhil Kumar, B. Veera Siva Reddy, C. Chandrasekhara Sastry, A. Hafeezur Rahman

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Cellular and Composite Structures · High-Velocity Impact and Material Behavior · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Metallic lattice structures via additive manufacturing: applications, challenges and opportunities in aerospace and defence10.1016/j.jmapro.2025.12.045 ↗
2. High-strain-rate response of alloys fabricated by conventional and additive manufacturing techniques
3. Excellent strength and ductility synergy through tailoring cellular structures and precipitates in additively manufactured Ni-based superalloy10.1016/j.msea.2025.148427 ↗
4. Veera Siva Reddy, B., Brahmadathan, V.B., Ameer Malik, S., Hafeezur Rahman, A., Chandrasekhara Sastry, C., Krishnaiah, J., Suryakumar, S. High-strain-rate response and microstructural evolution of additively manufactured A286 steel lattice structures: a multiscale experimental investigation, Adv. Eng. Mater., e202501983. https://doi.org/10.1002/adem.202501983.10.1002/adem.202501983 ↗
5. Understanding the impact of texture on the micromechanical anisotropy of laser powder bed fused Inconel 71810.1007/s10853-022-07499-9 ↗
6. Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy10.1016/j.actamat.2021.116876 ↗
7. Tailoring corrosion resistance of laser powder bed fusion produced Ti-6Al-4V via heat treatment at 700 °C in potential biomedical applications: microstructural evolution and electrochemical behavior10.1016/j.metadv.2026.01.001 ↗
8. Morphology, microstructure, and mechanical properties of TiZrTa0.7NbMo refractory high-entropy alloy spherical powder prepared by ultrasonic atomization10.1016/j.intermet.2025.109019 ↗
9. Natural cellular structures in engineering designs built via additive manufacturing10.1080/10667857.2024.2443211 ↗
10. Insight into elongation and strength enhancement of heat-treated LPBF Ni-based superalloy 718 using in-situ SEM-EBSD10.1016/j.msea.2024.147163 ↗
11. Influence of architecture and temperature on the critical strain for serrated flow in additively manufactured Inconel 718 lattices
12. Investigations into the mesoscale mechanical responses of additively manufactured octahedron IN718 lattice structures
13. Hybrid experimental and AI-driven microstructural and residual stress evaluation of laser powder bed fusion-fabricated IN718 and A286 steel versus rolled armor steels
14. Machine learning-based prediction of high-strain-rate response in additively manufactured lattice structures using split hopkinson pressure bar experiments10.1002/adem.202501406 ↗
15. Laser-based additively manufactured bio-inspired crashworthy structure: energy absorption and collapse behaviour under static and dynamic loadings10.1016/j.matdes.2021.110128 ↗
16. The effect of composition on microstructure and properties for additively manufactured superalloy 71810.1016/j.jallcom.2021.159789 ↗
17. Influences of powder characteristics and recoating conditions on surface morphology of powder bed in metal additive manufacturing10.1007/s00170-021-07359-x ↗
18. Physics-informed neural networks for predicting high-strain-rate energy absorption in additively manufactured lattice materials
19. Temperature effect on adiabatic shear phenomenon and microstructure evolution of directional energy deposition 316L stainless steel
20. Multiple damage mechanisms facilitated by planar dislocation glide in a commercial-grade precipitation-strengthened Fe-Ni-Cr-based steel10.1016/j.msea.2020.139250 ↗
21. Heat treatments of Inconel 718 nickel-based superalloy: a review10.1007/s12540-024-01812-8 ↗
22. Explainable machine learning for high-strain-rate prediction of LPBF-fabricated A286 lattice structures under SHPB testing10.1108/RPJ-08-2025-0362 ↗
23. A comparison of high strain rate response and adiabatic shear band formation in additively and traditionally manufactured Inconel 71810.1016/j.matchar.2023.113506 ↗
24. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
25. Effect of solid-solution treatment on high-temperature properties and creep fracture mechanism of laser powder bed fused Inconel 625 alloy10.1016/j.msea.2024.146592 ↗
26. A comprehensive review of recent advances in laser powder bed fusion characteristics modeling: metallurgical and defects10.1007/s00170-024-13491-1 ↗
27. A metallographic review of 3D printing/additive manufacturing of metal and alloy products and components10.1007/s13632-018-0433-6 ↗
28. Performance evaluation of machine learning techniques in surface roughness prediction for 3D printed micro-lattice structures10.1016/j.jmapro.2025.01.082 ↗
29. Powder spreading in laser-powder bed fusion process10.1007/s10035-021-01162-x ↗
30. Influences of powder morphology and spreading parameters on the powder bed topography uniformity in powder bed fusion metal additive manufacturing
31. Influence of storage conditions and reconditioning of AlSi10Mg powder on the quality of parts produced by laser powder bed fusion (LPBF)
32. Powder bed fusion additive manufacturing of Ni-based superalloys: a review of the main microstructural constituents and characterization techniques10.1007/s10853-022-07501-4 ↗
33. Isothermal and cyclic oxidation of haynes 282 processed by electron beam melting (EBM) and laser powder bed fusion (LPBF) in dry air at 800 and 950 °C10.1007/s11837-022-05201-7 ↗
34. Performance evaluation of machine learning techniques in surface morphology and corrosion prediction for A286 3D printed micro-lattice structures10.1371/journal.pone.0320565 ↗
35. High-strain-rate impact performance of inconel 718 lattice structures produced by laser powder bed fusion
36. Improving the surface quality of maraging 300 parts produced via laser powder bed fusion through powder distribution selection and optimized laser remelting10.1016/j.jmapro.2025.02.014 ↗
37. Enhanced underbelly protection for armored vehicles using laser powder bed fusion additive manufacturing of micro-lattice structures
38. Impact of IN718 bimodal powder size distribution on the performance and productivity of laser powder bed fusion additive manufacturing process10.1016/j.powtec.2020.07.092 ↗
39. Effect of building direction on high strain-rate compressive behavior of heat-treated LPBF-maraging steels using Split Hopkinson pressure bar apparatus10.1016/j.msea.2022.142653 ↗
40. A comparative study on laser powder bed fusion of IN718 powders produced by gas atomization and plasma rotating electrode process10.1016/j.msea.2022.143589 ↗
41. Geometric deviation and compensation for thin-walled shell lattice structures fabricated by high precision laser powder bed fusion
42. Investigation of additive manufactured micro-lattice structures for defence applications10.2478/msp-2023-0023 ↗
43. Precipitate phase behavior and mechanical properties of Inconel 718 according to aging heat treatment time10.1016/j.msea.2024.147776 ↗
44. Performance evaluation of metallic honeycomb and gyroid micro-lattice structures for armoured fighting vehicles10.1007/s12666-023-03146-2 ↗
45. Dynamic constitutive behavior of LPBFed metal alloys10.1016/j.jmrt.2023.05.252 ↗
46. Quasi-static and dynamic behavior of additively manufactured metamaterial structures with layered-hybrid topologies10.1016/j.tws.2022.110434 ↗
47. Evaluating quasi-static and fatigue performance of IN718 gyroid lattice structures fabricated via LPBF: exploring relative densities10.1016/j.ijfatigue.2023.108028 ↗
48. Influence of geometric defects on the compression behaviour of thin shell lattices fabricated by micro laser powder bed fusion
49. Synergistic enhancement of load-bearing and energy-absorbing performance in additively manufactured lattice structures through modifications to conventional unit cells10.1016/j.dt.2025.06.017 ↗
50. Fuzzy MCDM-based selection of 3D printed lattice architectures for underbody blast protection in armored vehicles
51. Role of the γ′′ precipitation at the cell boundaries in enhancing the creep resistance of additively manufactured Inconel 718 alloy using the laser powder bed fusion technique10.1016/j.msea.2024.147304 ↗
52. Microstructure and geometry effects on the compressive behavior of LPBF-manufactured inconel 718 honeycomb structures10.1016/j.jmrt.2023.03.093 ↗
53. Abnormal precipitation behavior of γ'′ phase at twin boundaries of LPBF Inconel 718 and its effect on mechanical properties10.1016/j.matchar.2024.114195 ↗
54. Effect of grain boundary irregularity on impact toughness in Inconel 718 alloy fabricated by laser powder bed fusion
55. High-strain-rate response of alloys fabricated by conventional and additive manufacturing techniques
56. Microstructure evolution and fracture mechanism of a Fe-Ni-Cr superalloy during various strain rates tensile deformation at elevated temperatures10.1007/s10853-023-08368-9 ↗
57. A novel combined gradient structure to achieve superior strength-ductility synergy in precipitation-strengthened A286 alloy10.1016/j.jallcom.2025.180894 ↗
58. High strain rate effect on tensile ductility and fracture of AM fabricated Inconel 718 with voided microstructures10.1016/j.matdes.2021.109908 ↗
59. Laser powder bed fusion of node-reinforced hybrid lattice structure inspired by crystal microstructure: structural feature sensitivity and mechanical performance10.1016/j.msea.2022.144048 ↗
60. Quantification of porosity and microstructure and their effect on quasi-static and dynamic behavior of additively manufactured Inconel 718
61. Grain disintegration and dynamic recrystallization during impact tests of additively manufactured nickel-based alloy 71810.1016/j.jmrt.2024.10.157 ↗
62. Design of non-uniform three-dimensional star-shaped concave lattice structures via metal additive manufacturing for high energy absorption and lightweight applications10.1080/0951192X.2026.2619778 ↗
63. Laser powder bed fusion additive manufacturing (LPBF-AM): the influence of design features and LPBF variables on surface topography and effect on fatigue properties10.1080/10408436.2022.2041396 ↗
64. Microstructural evolution and formation of fine grains during fatigue crack initiation process of laser powder bed fusion Ni-based superalloy
65. Coupled effect of microstructure and topology on the mechanical behavior of Inconel718 additively manufactured lattices10.1016/j.matdes.2022.111294 ↗
66. On the interplay of microstructure and residual stress in LPBF IN71810.1007/s10853-020-05553-y ↗
67. Microstructure effect on the machinability behavior of additive and conventionally manufactured Inconel 718 alloys10.1016/j.jmatprotec.2023.118228 ↗
68. Excellent strength and ductility synergy through tailoring cellular structures and precipitates in additively manufactured Ni-based superalloy10.1016/j.msea.2025.148427 ↗
69. Mechanical behaviour of additively manufactured metals