Processing maps and microstructural events in hot deformation of an Al-Cu alloy
Source abstract
Abstract
This study investigates the hot deformation behavior and microstructural evolution of an AA2017 aluminum alloy with the aim of establishing optimal processing parameters through a comprehensive approach combining hot compression tests, Electron Backscatter Diffraction (EBSD) analysis, and the development of a corresponding processing map. To this end, hot compression tests were first performed on solid-solution-treated samples within a temperature range of 300 °C to 450 °C and strain rates of 0.001 s-1 to 0.1 s-1. An artificial neural network (ANN) model was developed to accurately predict the flow stress, and the corresponding processing maps were subsequently generated. Furthermore, the dominant dynamic restoration mechanisms were studied through EBSD observations and correlated with the flow behavior and the developed processing map. At low temperatures and high strain rates (e.g. 300 °C - 0.001 s-1 and 400 °C - 0.1 s-1) dynamic recovery (DRV) was found to be the governing softening mechanism, leading to highly deformed microstructures with extensive low-angle grain boundaries and inhomogeneous deformation, which corresponded to unstable regions in the processing maps. Conversely, at high temperatures and low strain rates, dynamic recrystallization (DRX) became the dominant softening process. At the highest temperature and the lowest strain rate, i.e. 450 °C - 0.001 s-1, discontinuous DRX was detected, resulting in highly refined, equiaxed, and largely strain-free microstructure, which coincided with stable regions (high efficiency areas) of the processing maps.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Microstructure and properties of as-cast and heat-treated 2017A aluminium alloy obtained from scrap recycling
2. Residual stresses and microstructural evolution of ECAPed AA201710.1016/j.matchar.2019.04.007 ↗
3. Constitutive descriptions for hot compressed 2124-T851 aluminum alloy over a wide range of temperature and strain rate10.1016/j.commatsci.2010.08.003 ↗
4. Hot deformation behavior of 2026 aluminum alloy during compression at elevated temperature10.1016/j.msea.2009.09.042 ↗
5. Characterization and modeling of the high temperature flow behavior of aluminum alloy 202410.1007/BF02645920 ↗
6. Simple physically-based constitutive equations for hot deformation of 2024 and 7075 aluminum alloys10.1016/S1003-6326(15)63765-7 ↗
7. The effect of heat treatment on hot deformation behavior of Al 202410.1016/j.jmatprotec.2007.11.261 ↗
8. Development of a processing map for use in warm-forming and hot-forming processes10.1007/BF02643490 ↗
9. Modeling the flow behavior of a medium carbon microalloyed steel under hot working conditions10.1007/s11661-997-0181-8 ↗
10. Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach10.1016/j.ijplas.2020.102710 ↗
11. Constitutive relationships for hot deformation of austenite10.1016/j.actamat.2011.07.008 ↗
12. Hot deformation and processing map of 2519A aluminum alloy10.1016/j.msea.2010.10.080 ↗
13. Hot deformation behavior of a medium carbon microalloyed steel10.1016/j.msea.2011.01.098 ↗
14. Examining the effect of the aging state on strength and plasticity of wrought aluminum alloys10.1016/j.jmst.2021.11.075 ↗
15. 2017A aluminium alloy in different heat treatment conditions
16. Effects of temper condition on high strain-rate deformation of AA 2017 aluminum alloy in compression10.1016/j.matdes.2015.10.047 ↗
17. Influence of heat treatments and anodization on fatigue life of 2017A alloy10.1016/j.engfailanal.2013.05.003 ↗
18. The effect of homogenization and precipitation treatments on the extrudability and ambient-temperature mechanical properties of aluminum alloy AA202410.1016/0921-5093(93)90593-4 ↗
19. Effect of homogenization and precipitation treatments on the hot workability of an aluminium alloy AA202410.1016/0921-5093(90)90289-F ↗
20. Effect of initial microstructure on the hot compression deformation behavior of a 2219 aluminum alloy10.1016/j.matdes.2011.07.061 ↗
21. Compressive deformation behavior of Al 2024 alloy using 2D and 4D processing maps10.1007/s10853-010-5203-z ↗
22. Hot deformation characterization of pure aluminum using artificial neural network (ANN) and processing map considering initial grain size10.1007/s12540-020-00943-y ↗
23. Modeling of flow stress of AA6061 under hot compression using artificial neural network10.1016/j.matpr.2017.02.042 ↗
24. A comparative study on the phenomenological and artificial neural network models to predict hot deformation behavior of AlCuMgPb alloy10.1016/j.jallcom.2016.04.300 ↗
25. Flow behavior of AA5005 alloy at high temperature and low strain rate based on Arrhenius-type equation and back propagation artificial neural network (BP-ANN) Model
26. The use of ANN to predict the hot deformation behavior of AA7075 at low strain rates10.1007/s11665-012-0332-y ↗
27. Effect of microstructural complexity on the hot deformation behavior of aluminum alloy 202410.1016/j.msea.2003.09.078 ↗
28. Hot deformation behavior and microstructural evolution of the Al-Cu-Li alloy: a study with processing map10.1016/j.jallcom.2022.167755 ↗
29. Study of hot deformation of an Al-Cu-Mg alloy using processing maps and microstructural characterization10.1016/j.msea.2012.05.082 ↗
30. Hot compression test of AA 2014 aluminum alloy with microstructure analysis and processing maps10.1016/j.matpr.2017.11.392 ↗
31. Development of processing maps and constitutive relationship for thermomechanical processing of aluminum alloy AA221910.1007/s11665-017-2669-8 ↗
32. Warm and hot deformation behaviors and hot workability of an aluminum-magnesium alloy using artificial neural network
33. Deformation behavior and cavitation of AA2017 at elevated temperatures10.1007/s12540-020-00755-0 ↗