Interfacial resistivity of precipitate-decorated grain boundaries: A case study of additively manufactured Al-Si alloys
Source abstract
Abstract
Interface resistivity of grain boundaries (GBs) is a crucial property determining the electrical properties of conductive materials. GB resistivity is determined by the material type, the boundary character, and segregation-induced chemistry. This work focuses on the interfacial resistivities of precipitate-decorated GBs in Al-Si alloys, additively manufactured using directed energy deposition. Resistivities across individual low-angle and high-angle GBs (LAGB and HAGB, respectively) decorated with precipitates are resolved for as-printed and annealed alloys. The boundary’s contribution to resistivity is evaluated using a four-point probe method performed inside a scanning electron microscope. Moreover, the interfacial GB resistivity is measured by a scanning four-point probe technique applied on an individual GB isolated using focused ion beam nanopatterning. We find that the resistivities of LAGB and HAGBs are 2.7 and 10 × 10 −14 Ω m 2 , respectively, about two orders of magnitude larger than the resistivity of GBs in pure Al. In addition, we find that heat treatments lead to a larger decrease of resistivity for HAGBs compared to LAGBs. Also, we show that Fe impurities, the most common impurity in Al alloys, segregate to the GBs, consequently decreasing their resistivity. Eventually, the reported GB resistivities are discussed with respect to interfaces in different materials systems.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Accounting for the resistivity contribution of grain boundaries in metals: critical analysis of reported experimental and theoretical data for Ni and Cu
2. Examination of precipitation in the aluminum alloy AA6111 using electrical resistivity measurements10.1016/j.msea.2006.01.042 ↗
3. The effect of grain boundaries on the electrical resistivity of polycrystalline copper and aluminium
4. Understanding grain boundary electrical resistivity in Cu: the effect of boundary structure10.1021/acsnano.1c06367 ↗
5. Decoupling the electrical resistivity contribution of grain boundaries in dilute Fe-alloyed Cu thin films10.1016/j.scriptamat.2023.115393 ↗
6. Influence of Mg/Si ratio on the mechanical strength and electrical conductivity of Al-Mg-Si alloys
7. Electrical resistivity and tensile strength relationship in heat-treated all aluminum alloy wire conductors10.3390/ma14195738 ↗
8. Review on recent progress in Al–Mg–Si 6xxx conductor alloys10.1557/s43578-022-00488-3 ↗
9. Al–Si alloy as a diffusion barrier for GeTe-based thermoelectric legs with high interfacial reliability and mechanical strength10.1021/acsami.0c02028 ↗
10. Large discrete resistance jump at grain boundary in copper nanowire10.1021/nl101734h ↗
11. Reducing grain-boundary resistivity of copper nanowires by doping10.1103/PhysRevApplied.5.054018 ↗
12. Breaking the trade-off relation of strength and electrical conductivity in pure Al wire by controlling texture and grain boundary10.1016/j.jallcom.2018.07.358 ↗
13. Fabrication of hypoeutectic Al-4Si alloy with high electrical conductivity, high plasticity and medium strength by the dual treatment of Al matrix and eutectic Si microstructure10.1016/j.jallcom.2021.161117 ↗
14. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
15. Directed energy deposition of Al 5xxx alloy using Laser Engineered Net Shaping (LENS®)10.1016/j.matdes.2020.108763 ↗
16. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
17. Laser processing of bulk Al–12Si alloy: influence of microstructure on thermal properties10.1080/14786435.2010.526650 ↗
18. Hybrid Al + Al3Ni metallic foams synthesized in situ via laser engineered net shaping10.1080/14786435.2011.586375 ↗
19. Directed energy deposition (DED) additive manufacturing: physical characteristics, defects, challenges and applications10.1016/j.mattod.2021.03.020 ↗
20. Approaches to measure the resistivity of grain boundaries in metals with high sensitivity and spatial resolution: a case study employing Cu10.1021/acsaelm.0c00311 ↗
21. Microstructure manipulation by laser-surface remelting of a full-Heusler compound to enhance thermoelectric properties10.1016/j.actamat.2021.117501 ↗
22. Dopant-segregation to grain boundaries controls electrical conductivity of n-type NbCo(Pt)Sn half-Heusler alloy mediating thermoelectric performance10.1016/j.actamat.2021.117147 ↗
23. The precipitation sequence in Al–Mg–Si alloys10.1016/S1359-6454(98)00059-7 ↗
24. The 100th anniversary of the four-point probe technique: the role of probe geometries in isotropic and anisotropic systems10.1088/0953-8984/27/22/223201 ↗
25. Thermal conductivity, electrical resistivity, and seebeck coefficient of silicon from 100 to 1300 K10.1103/PhysRev.167.765 ↗
26. Grain Boundary Order/Disorder and Energy
27. Misorientation dependence of intrinsic grain boundary mobility: simulation and experiment10.1016/S1359-6454(99)00240-2 ↗
28. Grain boundary segregation engineering in metallic alloys: a pathway to the design of interfaces10.1016/j.cossms.2014.06.002 ↗
29. Progress in the investigations of grain boundary relaxation10.1080/10408436.2015.1135416 ↗
30. Calculated resistances of single grain boundaries in copper10.1103/PhysRevApplied.2.044007 ↗
31. Electrical resistivity and grain boundaries in metals10.4028/www.scientific.net/MSF.207-209.47 ↗
32. Conductive Al Alloys: the contradiction between strength and electrical conductivity10.1002/adem.202001249 ↗
33. Grain boundary resistivity of aluminium
34. Resistivity due to grain boundaries in pure copper10.1016/0031-9163(65)90776-6 ↗
35. The specific grain-boundary electrical resistivity of Ni10.1080/14786435.2019.1580399 ↗
36. Universality of grain boundary phases in fcc metals: case study on high-angle [111] symmetric tilt grain boundaries10.1103/PhysRevB.107.054103 ↗
37. First-principles prediction of electron grain boundary scattering in fcc metals10.1063/5.0098822 ↗
38. Highly distorted grain boundary with an enhanced carrier/phonon segregation effect facilitates high-performance thermoelectric materials10.1021/acsami.1c15422 ↗
39. High-power-density skutterudite-based thermoelectric modules with ultralow contact resistivity using Fe–Ni metallization layers10.1021/acsaem.8b00064 ↗