Investigation of solution treatment and natural aging on the microstructural modification of the A356.2 aluminum alloy: effect on the alloy’s strength and conductivity
Source abstract
Abstract
The transportation sector continues to make strides toward the lightweighting of vehicles; however, many potential alloys considered for novel applications lack adequate thermal and electrical conductivity properties. In this study, as-cast aluminum alloy A356.2 was solution-treated and naturally aged to examine the effect of thermal processing on the microstructure evolution and subsequent mechanical and conductive properties of the alloy. The morphological transformation of key constitutive phases was tracked during the solution treatment. The microhardness and electrical conductivity were incrementally characterized from as-cast to the naturally aged conditions. Subsequently, samples with optimal properties were evaluated for tensile strength and high-temperature electrical and thermal conductivities. The effect of aging, whether natural or artificial, is generally considered a process that purifies the matrix, resulting in an overall increase in electrical conductivity. However, this study’s results show that the effect of phase evolution during natural aging, commonly accepted to be limited to the precipitation of GP-I zone clusters, causes a decrease in thermal and electrical conductivity. Initially, the electrical conductivity of the 12-hour T4 sample increased by 13.1% after solutionizing; however, natural aging decreased this by 3.7% compared to the as-cast alloy. In contrast, the clusters and silicon refinement contributed to increases of 21.7% in microhardness, 24.1% in yield strength, 24.4% in ultimate tensile strength, and a 101% increase in elongation. The room temperature thermal conductivity of the naturally aged sample increased by 5.9%. • Observing specific A356 phase particle modification from solution treatment. • Thermo-Calc Si and Mg diffusion simulations corelated with observed behaviour. • Optimal solution treatment of 12 hours at 510 °C identified. • Longest treatment resulted in smallest aspect ratio and highest conductivity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. “Climate Change - NASA Science.” Accessed: Dec. 11, 2024. [Online]. Available: 〈https://science.nasa.gov/climate-change/〉.
2. “US: Light-duty: Fuel Economy and GHG | Transport Policy.” Accessed: Dec. 11, 2024. [Online]. Available: 〈https://www.transportpolicy.net/standard/us-light-duty-fuel-economy-and-ghg/〉.
3. P. W and G. S. C Government of Canada, “Canada Gazette, Part 2, Volume 157, Number 26: Regulations Amending the Passenger Automobile and Light Truck Greenhouse Gas Emission Regulations.” Accessed: Dec. 11, 2024. [Online]. Available: 〈https://gazette.gc.ca/rp-pr/p2/2023/2023-12-20/html/sor-dors275-eng.html〉.
4. Evaluation of a New High Temperature Cast Aluminum for Cylinder Head Applications
5. Improving Thermal Efficiency of Internal Combustion Engines: Recent Progress and Remaining Challenges10.3390/en15176222 ↗
6. The heat treatment of Al–Si–Cu–Mg casting alloys10.1016/j.jmatprotec.2010.03.020 ↗
7. Al-Si Alloys: Automotive, Aeronautical, and
8. Alloying: understanding the basics: aluminum and Aluminum Alloys
9. Modification of eutectic silicon in Al–Si alloys10.1007/s10853-008-2505-5 ↗
10. Effect of T4 heat treatment on microstructure and hardness of A356 alloy refined by Ga+In+Sn mixed alloy10.1016/j.matdes.2013.12.022 ↗
11. The Natural and Artificial Aging Response of Semi-Solid Metal Processed Alloy A35610.4028/www.scientific.net/SSP.141-143.737 ↗
12. Advanced light metals casting development: solidification of aluminium alloy A35610.1179/026708304225011199 ↗
13. Effect of Solution Treatment on Microstructure and Mechanical Properties of A356.2 Aluminum Alloy Treated With Al–Sr–La Master Alloy10.1002/adem.201701173 ↗
14. Thermal Conductivity of Aluminum Alloys—A Review10.3390/ma16082972 ↗
15. Callister · 2014
16. Aluminum: Properties and physical metallurgy.(book)
17. Simultaneous Improvement of Thermal Conductivity and Strength for Commercial A356 Alloy Using Strontium Modification Process10.1007/s12540-020-00669-x ↗
18. Thermal Conductivity of Pure Metals and Alloys10.1007/b91373 ↗
19. The effect of main alloying elements on the physical properties of Al–Si foundry alloys10.1016/j.msea.2012.09.093 ↗
20. Thermal and electrical conductivity in Al–Si/Cu/Fe/Mg binary and ternary Al alloys10.1007/s10853-015-9115-9 ↗
21. THE EFFECT OF ALLOYING ELEMENTS ON THERMAL CONDUCTIVITY AND CASTING CHARACTERISTIC IN HIGH PRESSURE DIE CASTING OF ALUMINUM ALLOY
22. Effect of as-solidified microstructure on subsequent solution-treatment process for A356 Al alloy10.1016/S1003-6326(16)64152-3 ↗
23. The Grain Refining of Aluminum and Phase Relationships in the Al-Ti-B System10.1007/BF02645112 ↗
24. GRAIN REFINEMENT OF ALUMINUM CASTING ALLOYS
25. Effects of strontium addition on the microstructure and corrosion behavior of A356 aluminum alloy10.1016/j.jallcom.2018.05.341 ↗
26. On the silicon spheroidization in Al–Si alloys10.1016/S1471-5317(03)00010-5 ↗
27. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
28. Prediction of dendrite arm spacings in unsteady-and steady-state heat flow of unidirectionally solidified binary alloys10.1007/s11663-997-0039-x ↗
29. Fundamentals of Solidification
30. INFLUENCE OF SOLIDIFICATION PARAMETERS ON THE THERMAL CONDUCTIVITY OF CAST A319 ALUMINUM ALLOY
31. Development of precipitation-strengthened aluminum alloys and manufacturing processes for next generation automotive powertrains
32. Effect of high temperature solution heat treatment time on quality index and morphology of A356 DC alloy10.1016/j.matpr.2021.09.477 ↗
33. The negative effect of solution treatment on the age hardening of A356 alloy10.1016/j.msea.2012.12.093 ↗
34. Kaufman · 2004
35. J.E. Gruzleski, Microstructure Development during Metalcasting. American Foundry Society (AFS), 2018. [Online]. Available: 〈https://app.knovel.com/hotlink/pdf/id:kt011QSCBA/microstructure-development/introduction〉.
36. Natural and artificial aging response of semisolid metal processed Al–Si–Mg alloy A35610.1179/136404608X286156 ↗
37. Solution Treatment Study of Cast Al–Si Alloys by Electrical Conductivity10.1179/cmq.1989.28.3.251 ↗
38. 1996
39. Solidification and precipitation behaviour of Al-Si-Mg casting alloys10.1023/A:1004801327556 ↗
40. Diffusion of silicon in aluminum10.1007/BF02663412 ↗
41. Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation10.1016/S0921-5093(03)00624-5 ↗
42. Surface self-diffusion on Si from the evolution of periodic atomic step arrays10.1016/0022-3697(94)90116-3 ↗
43. Second phase dissolution10.1007/BF02663326 ↗
44. Effects of T6 heat treatment on the microstructure, tensile properties, and fracture behavior of the modified A356 alloys10.1016/j.matdes.2011.11.018 ↗
45. Diffusion of iron, nickel and cobalt in aluminum10.1016/0001-6160(62)90100-1 ↗
46. Response to artificial ageing of dendritic and globular Al–7Si–Mg alloys10.1016/j.jallcom.2009.05.043 ↗
47. Precipitation hardening in Al–Mg–Si alloys with and without excess Si10.1016/S0921-5093(01)01247-3 ↗
48. Solute nanostructures and their strengthening effects in Al–7Si–0.6Mg alloy F35710.1016/j.actamat.2011.10.029 ↗
49. Vacancies in aluminium and solute-vacancy interactions in aluminium alloys
50. Mechanisms affecting hardness and electrical conductivity in artificially-aged B319 aluminum alloy10.1016/j.jallcom.2021.159121 ↗
51. Aluminum-silicon casting alloys: atlas of microfractographs. Materials Park
52. Effect of Different T6 Heat Treatment Conditions on the Microstructure and Mechanical Properties of Al-7%Si-0.35% Mg (A356) Alloy for Use in Motorcycles10.3390/met15070692 ↗
53. Bakhtiyarov · Electr. Therm. Conduct. A319 A356 Alum. Alloy. · 2001
54. Utilizing Low Solubility, Light Metal Eutectic Systems for Castable, High Electrical/Thermal Conductivity Alloys10.1007/s12666-023-03232-5 ↗