journal article·2026-01Open access

Microstructure and phase composition of the cast Al-1at.%(Ni+REM) alloys with Ni/REM ratio equal 3/1 and 5/3

M. Kutsov, E.N. Zanaeva, M.V. Glavatskikh, M.G. Khomutov, R.Yu. Barkov, A.V. Pozdniakov

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. ‘Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM International, 1990, https://doi.org/10.31399/asm.hb. v02.9781627081627.
2. Iron in Aluminium Alloys Impurity and Alloying Element, Taylor&Francis Inc., 2002, https://doi.org/10.1201/9781482265019.10.1201/9781482265019 ↗
3. Effects of Ni content on microstructure and wear behavior of Al–13Si–3Cu–1Mg-XNi-0.6Fe-0.6Mn alloys10.1016/j.wear.2022.204365 ↗
4. Quantitative comparison of three Ni-containing phases to the elevated-temperature properties of Al–Si piston alloys10.1016/j.msea.2010.07.073 ↗
5. Evolution of bimodal microstructure and high-temperature wear resistance of Al-Cu-Ni alloys10.1007/s11661-019-05518-0 ↗
6. Search for promising compositions for developing new multiphase casting alloys based on Al-Cu-Mg matrix using thermodynamic calculations and mathematic simulation10.1134/S0031918X12110154 ↗
7. Search for promising compositions for developing new multiphase castingalloys based on Al-Zn-Mg matrix using thermodynamic calculations and mathematic simulation10.1134/S0031918X13120107 ↗
8. Effect of eAl3Ni phase on mechanical properties of Al–Si–Cu–Mg–Ni alloys at elevated temperature10.1016/j.msea.2019.138794 ↗
9. Effect of Ni on the contributions of superplastic deformation mechanisms in an Al–Zn–Mg–Cr alloy10.1134/S0031918X23601464 ↗
10. Particle stimulated nucleation effect for Al-Mg-Zr-Sc alloys with Ni addition during multidirectional forging10.3390/met13081499 ↗
11. Microstructural analysis and constitutive modeling of superplastic deformation behavior of Al-Mg-Zn-Cu-Zr-XNi alloys with different Ni contents10.3390/met15010045 ↗
12. Determining the hot cracking index of Al-Si-Cu-Mg casting alloys calculated using the effective solidification range10.1179/1743133613Y.0000000096 ↗
13. Determining the hot cracking index of Al-Mg-Zn casting alloys calculated using the effective solidification range10.1179/1743133615Y.0000000029 ↗
14. Effect of Ni on microstructure and mechanical properties of Al-Cu-Mn alloy
15. Microstructure features and mechanical/ electrochemical behavior of directionally solidified Al-6wt% Cu-5wt%Ni alloy10.1016/S1003-6326(21)65596-6 ↗
16. Effect of Ni and Si alloying elements on the phase evolution, mechanical properties, tribological behaviour of Al–Cu alloys10.1016/j.matchemphys.2023.127421 ↗
17. The effect of Ni addition on the phase composition and properties of Quasi-binary Al-Cu-Y(Er,Yb,Gd) alloys
18. Microstructure of Al3Sc with ternary transition-metal additions10.1016/S0921-5093(01)01608-2 ↗
19. Nanoscale precipitation and mechanical properties of Al-0.06 at% Sc alloys microalloyed with Yb or Gd10.1007/s10853-006-0664-9 ↗
20. Evolution of nanoscale precipitates in Al microalloyed with Sc and Er10.1016/j.actamat.2009.04.034 ↗
21. Synergetic effect of Er and Zr on the precipitation hardening of Al–Er–Zr alloy10.1016/j.scriptamat.2011.06.033 ↗
22. A study of nanoscale Al3(Zr,Yb) dispersoids structure and thermal stability in Al–Zr–Yb alloy10.1016/j.msea.2011.12.094 ↗
23. Structural and compositional evolution of Al3(Zr,Y) precipitates in Al-Zr-Y alloy10.1016/j.matchar.2016.10.012 ↗
24. Microstructure and mechanical properties of novel Al-Y-Sc alloys with high thermal stability and electrical conductivity10.1016/j.jmst.2019.08.006 ↗
25. Effect of Yb on the structure and properties of an electroconductive Al–Y–Sc alloy10.1134/S0031918X20060022 ↗
26. Novel precipitation strengthened Al-Y-Sc-Er alloy with high mechanical properties, ductility and electrical conductivity produced by different thermomechanical treatments10.1016/j.jallcom.2022.165748 ↗
27. High hardening effect and formation of three types precipitates in the Al-0.3Zr-0.3Gd(Yb) with Fe and Si impurities10.1016/j.jallcom.2025.179724 ↗
28. Effect of iron and silicon impurities on the phase composition and hardening under annealing of Al–0.3Zr–REM (REM = Er, Y, Yb, Gd) alloys ingots10.1007/s11015-025-01965-w ↗
29. Structure and properties of new heat-resistant cast alloys based on the Al-Cu-Y and Al-Cu-Er systems10.1134/S0031918X21090027 ↗
30. Structure and properties of new wrought Al-Cu-Y and Al-Cu-Er based alloys10.1134/S0031918X21080020 ↗
31. Microstructure and mechanical properties of novel heat resistant cast Al-Cu-Yb(Gd)-Mg-Mn-Zr alloys10.3390/met12122079 ↗
32. Comprehensive analysis of microstructure and hot deformation behavior of Al-Cu-Y-Mg-Cr-Zr-Ti-Fe-Si alloy10.3390/met13111853 ↗
33. The structure and properties of sheets of the Al–Zn–Mg–Cu–Zr–Y(Er) alloy doped with manganese10.1134/S0031918X23600501 ↗
34. Microstructure, mechanical and corrosion properties of novel cast heat resistant Al-4Zn-4Mg-4Cu-Zr-Y(Er) alloy10.1007/s11015-024-01620-w ↗
35. Microstructure and phase composition of novel crossover Al-Zn-Mg-Cu-Zr-Y(Er) alloys with equal Zn/Mg/Cu ratio and Cr addition10.3390/met14050547 ↗
36. Novel cast heat resistant crossover Al-Zn-Mg-Cu-Y-Zr-Cr alloy with improved corrosion and wear behavior, and low thermal expansion10.1016/j.jallcom.2025.181286 ↗
37. Thermal and electrical conductivity of aluminum alloys: fundamentals, structure-property relationships, and path ways to enhance conductivity10.1016/j.msea.2024.147766 ↗
38. Strength-thermal conductivity synergy of aluminum alloys revealed by Al–RE (RE = Ce, La, Gd, Y, Sm, Yb, Er) intermetallic compounds10.1016/j.matdes.2025.114221 ↗
39. L. Liu. Phase equilibria investigation of the Al–Ni–Er ternary system at 600 °C and 700 °C
40. Phase relations of the Sm–Ni–Al ternary system at 500 °C in the 40–100 at% Al region10.1016/j.intermet.2008.07.010 ↗
41. Phase relations of the Sm–Ni–Al ternary system at 800 °C in the 30–100 at% Al region10.1007/s11669-024-01119-6 ↗
42. The Gd-Ni-Al system: phases formation and isothermal sections at 500 °C and 800 °C10.1016/j.intermet.2013.10.009 ↗
43. The Al-rich region in the Y-Ni-Al system: microstructures and phase equilibria10.1016/S0966-9795(99)00100-4 ↗
44. Phase equilibria of the Ni-Al-Cr-Y quaternary system and the Ni-Al-Y ternary system at 900 °C10.1007/s11669-023-01057-9 ↗
45. Techno-economic analysis of supercritical extraction of rare earth elements from coal ash
46. Thermal conductivity of aluminum high-pressure die castings
47. Thermal conductivity of metals and alloys10.1179/095066086790324294 ↗
48. Electrical resistivity and thermal conductivity of pure aluminum and aluminum alloys up to and above the melting temperature10.1007/s10765-006-0144-0 ↗
49. Yield stress as determined from hardness measurements for mechanically alloyed aluminum base alloys10.1007/BF02645062 ↗
50. Effect of secondary phases on electrical conductivity and thermal conductivity of HPDC Al-Ni and Al-Fe alloys: a comparative study10.1016/j.jmrt.2025.09.178 ↗
51. Development of a new Al-Fe-Ni alloy for electric vehicle applications
52. Effect of secondary phases on electrical conductivity and thermal conductivity of HPDC Al-Ni and Al-Fe alloys: a comparative study10.1016/j.jmrt.2025.09.178 ↗
53. A newly-developed high-pressure die-cast Al-1.5Fe-1Ni alloy with high thermal conductivity: design10.1016/j.jmst.2025.04.044 ↗
54. Effect of Mn on the primary Fe-rich phases formation and thermal conductivity of Al-3Fe alloys10.1016/j.jallcom.2025.183301 ↗
55. AI assisted design of high thermal conductivity Al-Fe-Ni-Mg alloys