Effect of different heat treatments on the high temperature tensile behavior and electrical/thermal conductivity of HPDC castings in high recycled content AlSi10MnMg alloy
Source abstract
Abstract
The growing need to reduce the carbon footprint of transportation is driving vehicle lightweighting using thin-walled aluminum high-pressure die casting (HPDC) components. Using recycled rather than primary aluminum i.e., from bauxite, further enhances sustainability by reducing energy consumption and emissions. Accordingly, also heat treatments (HTs) with limited energy demand and low risk of dimensional distortions and blistering, like annealing and direct artificial aging, are today preferred. Many HPDC vehicle components also undergo finishing treatments at similar temperatures, such as e-coating, or are exposed to elevate service temperatures that can affect their final properties. Therefore, assessing their strength and thermal management capabilities is critical. The present study investigates the effects of HTs on the high-temperature tensile strength and electrical/thermal conductivity of an automotive component produced from an AlSi10MnMg HPDC alloy with a high recycled content. The mechanical and functional properties are correlated with microstructural features, including the size, morphology, and interparticle spacing of eutectic silicon, as modified by HTs. In turn, fracture surfaces analysis reveals the relationship between microstructural changes and failure mechanisms. Results clearly show that silicon particles play a crucial role in determining the investigated properties, significantly influencing strength and conductivity. Moreover, despite being produced through recycling processes, the recycled alloy exhibits overall performance comparable to that of primary alloys. This confirms its potential for sustainable lightweight solutions without compromising properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Advanced lightweight materials for automobiles: a review10.1016/j.matdes.2022.110994 ↗
2. Life-cycle energy and greenhouse gas emission benefits of lightweighting in automobiles: review and harmonization10.1021/es3042115 ↗
3. Kunststoffe im Automobilbau10.1007/BF03221872 ↗
4. A review on aluminum matrix composites' characteristics and applications for automotive sector
5. Current trends in metallic materials for body panels and structural members used in the automotive industry10.3390/ma17030590 ↗
6. Raw material supply by aluminium recycling – efficiency evaluation and long-term availability10.1016/j.actamat.2012.08.064 ↗
7. Utilization of red mud in road base and subgrade materials: a review10.1016/j.resconrec.2018.10.031 ↗
8. Recent development in aluminium for automotive applications10.1016/S1003-6326(14)63305-7 ↗
9. Pressure assisted processes for high integrity aluminum castings
10. Study of the solidification behavior and porosity measurements to enhance fatigue life of HPDC aluminum swing arm design10.1007/s11668-024-02027-0 ↗
11. Aluminum alloys: promising materials in the automotive industry10.1023/A:1021901715578 ↗
12. 6 - High-pressure die-cast (HPDC) aluminium alloys for automotive applications
13. Characterization of Al alloys injected through vacuum-assisted HPDC and influence of T6 heat treatment10.3390/met13020389 ↗
14. Influence of introducing Zr, Ti, Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy10.1007/s12613-024-2882-z ↗
15. Current trends in automotive lightweighting strategies and materials10.3390/ma14216631 ↗
16. Development of heat treatments for structural parts in aluminium alloys produced by high-pressure die casting (HPDC)10.3390/met14091059 ↗
17. Heat treatment of high-pressure die castings10.1007/s11661-007-9285-4 ↗
18. The influence of different vacuum degree on the porosity and mechanical properties of aluminum die casting10.1016/j.vacuum.2017.09.048 ↗
19. Effect of a short solution treatment time on microstructure and mechanical properties of modified Al–7wt%Si–0.3wt%Mg alloy10.1016/S1471-5317(02)00010-X ↗
20. Effect of short T6 heat treatment on the microstructure and the mechanical properties of newly developed die-cast Al–Si–Mg–Mn alloys10.1016/j.msea.2020.139610 ↗
21. Effects of solution treatment temperature and time on the porosities and mechanical properties of vacuum die-casted and T6 heat-treated Al–Si–Mg alloy10.1016/j.vacuum.2021.110536 ↗
22. Enhanced mechanical properties and homogeneous T5 age-hardening behavior of Al-Si-Cu-Mg casting alloys10.1016/j.jallcom.2023.170982 ↗
23. Influence of cooling condition after solidification on T5 heat treatment response of hypoeutectic Al-7Si-0.4Mg casting alloy10.1016/j.jallcom.2022.164339 ↗
24. Tailoring heat treatment for AlSi7Mg0.6 parts with as-built surface generated by laser powder bed fusion to reduce surface roughness sensitivity10.1016/j.jallcom.2024.173903 ↗
25. Improving the surface quality of AlMgSi1 alloy with the selection of the appropriate vibration grinding stones10.1186/s44147-023-00331-4 ↗
26. Services · Ultim. Guide Ecoat · 2025
27. PPG Industrial Coatings – Industrial Electrocoats, Powercron® Electrocoat Portfolio, 〈https://www.ppg.com/en-US/industrialcoatings/electrocoat/powercron-electrocoat-portfolio/〉, 2025 (accessed february 2025).
28. Modine Coatings, ElectroFin® Technology, 〈https://www.modinecoatings.com/electrofin-technology/〉, 2025 (accessed february 2025).
29. Thermal conductivity of aluminum alloys -a review
30. Effect of Sr modification on microstructure and thermal conductivity of hypoeutectic Al−Si alloys10.1016/S1003-6326(20)65428-0 ↗
31. Factors influencing thermal conductivity and mechanical properties in 319 Al alloy cylinder heads10.1016/j.msea.2015.09.091 ↗
32. Battery pack and underbody: integration in the structure design for battery electric vehicles—challenges and solutions10.3390/vehicles5020028 ↗
33. Li-ion cell operation at low temperatures10.1149/2.047304jes ↗
34. A mathematical model for a lithium–sulfur cell10.1149/1.2937304 ↗
35. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review10.1016/j.ensm.2017.05.013 ↗
36. Thermal runaway in a prismatic lithium ion cell triggered by a short circuit10.1016/j.est.2021.102737 ↗
37. Probing the heat sources during thermal runaway process by thermal analysis of different battery chemistries10.1016/j.jpowsour.2017.12.050 ↗
38. A review of thermal runaway prevention and mitigation strategies for lithium-ion batteries
39. Study on the suppression effect of cryogenic cooling on thermal runaway of ternary lithium-ion batteries10.3390/fire5060182 ↗
40. Research advances on thermal runaway mechanism of lithium-ion batteries and safety improvement
41. Silafont-36 [AlSi10MnMg] – Processing Data Sheet”, in Aluminium Casting Alloys Handbook: Proessing Data Sheets
42. Raffmetal Sp.A., EN43500 AlSi10MnMg – Technical Data Sheet, in Aluminium Alloys – Processing Data Sheets, Version 2020. 〈https://www.raffmetal.it/alluminio-da-rifusione/leghe-alluminio-colata-continua#search〉 (accessed september 2025).
43. Optimization of T5 heat treatment in high pressure die casting of Al–Si–Mg–Mn alloys by using an improved Kampmann-Wagner numerical (KWN) model10.1016/j.msea.2023.144604 ↗
44. Annealing behavior of a modified 5083 aluminum alloy10.1016/j.matdes.2009.09.004 ↗
45. Tables of Chemicals and Etchants
46. Image processing with ImageJ
47. Experimental determinations of the Lorenz number10.1007/BF01154931 ↗
48. Correlation of metallic thermal and electrical conductivities for both solid and liquid phases10.1016/0017-9310(65)90086-4 ↗
49. Sustainable choices of alloying element for aluminium for thermal conductivity in circular manufacturing
50. Thermophysical properties of A201, A319, and A356 aluminium casting alloys10.1068/htjr052 ↗
51. Electrical and thermal properties of LT-SOFC solid electrolytes: Sm cerates/zirconates obtained by mechanochemistry10.1016/j.ijhydene.2024.01.057 ↗
52. The INfluence of Cooling Rate on Microstructure and Mechanical Properties of AlSi9Cu310.3390/met11020186 ↗
53. Defect band characteristics in Mg-Al and Al-Si high-pressure die castings10.1007/s11661-007-9243-1 ↗
54. Microstructure formation in AlSi4MgMn and AlMg5Si2Mn high-pressure die castings10.1007/s11661-009-9841-1 ↗
55. Characterization of externally solidified crystals in a high-pressure die-cast AlSi10MnMg alloy and their effect on porosities and mechanical properties10.1016/j.jmatprotec.2021.117299 ↗
56. Influence of pore characteristics and eutectic particles on the tensile properties of Al–Si–Mn–Mg high pressure die casting alloy10.1016/j.msea.2020.139280 ↗
57. Strontium in Al–Si–Mg alloy: a review10.1007/s12540-021-01054-y ↗
58. The role of silicon morphology in the electrical conductivity and mechanical properties of As-cast B319 aluminum alloy10.1007/s11661-020-05650-2 ↗
59. The electrical conductivity of cast Al−Si alloys in the range 2–12.6 wt pct silicon10.1007/BF02653917 ↗
60. Controlling the Fe-intermetallic phases and mechanical properties of secondary Al-9Si-1Fe alloy with Cr and Mn additions10.1016/j.jmst.2024.04.014 ↗
61. The role of alloy composition and T7 heat treatment in enhancing thermal conductivity of aluminum high pressure diecastings10.1007/s11661-012-1443-7 ↗
62. Spheroidization of the Al-Si eutectic in a cast aluminum alloy10.1361/105994900770345467 ↗
63. Effects of solution treatment on microstructures and micro-hardness of a Sr-modified Al-Si-Mg alloy10.1016/j.msea.2018.04.049 ↗
64. Effects of eutectic silicon particles on tensile properties and fracture toughness of A356 aluminum alloys fabricated by low-pressure-casting, casting-forging, and squeeze-casting processes10.1016/j.jallcom.2007.07.038 ↗
65. ASM Handbook Committee · 1990 · 2
66. A quantitative study on the interaction between silicon content and heat treatment on thermal conductivity of Al-Si binary alloys
67. Multiple silicon nanotwins formed on the eutectic silicon particles in Al–Si alloys10.1016/j.scriptamat.2010.10.030 ↗
68. Hardness and Electrical Conductivity Testing of Aluminum Alloys
69. Dissimilarity of physical and mechanical properties of Al-(0.2–17.9 wt%) Si automotive alloys in under ageing, peak ageing, and over ageing conditions10.1016/j.matpr.2023.01.182 ↗
70. Metallurgy of Heat Treatable Aluminum Alloys
71. Influence of precipitation on thermal diffusivity of Al-6Si-0.4Mg-0.9Cu-(Ti) alloys10.1016/j.jallcom.2018.10.068 ↗
72. Thermal characteristics of heat-treated aluminum high-pressure die-castings10.1016/j.scriptamat.2008.01.031 ↗
73. Comparison between resistivity changes and Monte Carlo simulation for GP zone formation in Al–Cu base ternary alloys10.2320/matertrans1989.39.139 ↗
74. Effect of natural aging on the resistivity evolution during artificial aging of the aluminum alloy AA611110.1016/j.matlet.2004.10.052 ↗
75. A New Recycled Al–Si–Mg Alloy for Sustainable Structural Die Casting Applications10.1007/s11661-022-06711-4 ↗
76. Inhomogeneous skin formation and its effect on the tensile behavior of a high pressure die cast recycled secondary AlSi10MnMg(Fe) alloy10.1007/s11661-024-07631-1 ↗
77. The characterization of Fe-rich phases in a high-pressure die cast hypoeutectic aluminum-silicon alloy10.1016/j.jmst.2020.02.040 ↗
78. Microstructure and mechanical properties of high strength die-casting Al–Mg–Si–Mn alloy10.1016/j.matdes.2012.10.020 ↗