journal article·2025-12Open access

Trace Ca-induced trade-off between mechanical strengthening and corrosion degradation in as-extruded Mg-Sm-Zn alloys

Zhengyu Jiang, Dabiao Xia, Ningning Luo, Yanfu Chai, Yuchen Dou, Yan Zhang, Huabao Yang, Qingshan Yang, Dongyang Li

Abstract

This study systematically evaluated the impact of trace Ca additions on the microstructural characteristics, mechanical performance, and corrosion behavior of Mg-1.5Sm-1Zn alloy. The alloys, designated as SZX210 (Mg-1.5Sm-1Zn-0.2Ca) and SZX211 (Mg-1.5Sm-1Zn-0.6Ca), were compared with the base SZ21 (Mg-1.5Sm-1Zn) alloy. Microstructural characterization revealed that Ca addition promoted the area fraction of secondary phases and slightly refines grain size. The SZX210 exhibited a highly homogeneous dispersion of secondary phases with Ca primarily in solid solution, while the SZX211 alloy contained blocky Mg 2 Ca precipitates with heterogeneous phase distribution. Compressive tests demonstrated significant improvements in mechanical properties with Ca addition: the compressive yield strength (CYS) of SZX210 and SZX211 increased by 39.38 % and 62.87 %, respectively, compared to SZ21. In addition, the plasticity performance of SZX210 alloy reached its optimal level. Crystal plasticity finite element method (CPFEM) simulations confirmed that the enhanced strength originated from increased critical resolved shear stress (CRSS) for basal slip and tensile twinning. Corrosion assessments, including hydrogen evolution, electrochemical measurements, and immersion tests, demonstrated that the SZX210 alloy possessed the superior anti-corrosion performance, attributed to its uniform microstructure and formation of a stable Ca(OH) 2 -enriched surface film. In contrast, the SZX211 alloy suffered from severe localized corrosion attributed to galvanic coupling between the Mg 2 Ca phase and the Mg matrix, as well as inhomogeneous secondary phase distribution.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgical and Alloy Processes · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Strategy of galvanic corrosion mitigation for Mg alloys10.3389/fmats.2025.1582380 ↗
2. Achieving strength-ductility synergy in Mg-1.1 Gd-0.6 Zn-0.3 Mn alloy by regulating precipitation behavior via stress aging strategy
3. Deep drawing of magnesium alloys: a review10.1016/j.jma.2025.02.015 ↗
4. Strengthening and toughening mechanisms of martensite-bainite microstructure in 2 GPa ultra-high strength steel during hot stamping10.1007/s11431-024-2901-8 ↗
5. A state-of-the-art review on recent advances in the fabrication and characteristics of magnesium-based alloys in biomedical applications10.1016/j.jma.2024.06.015 ↗
6. Controllable degradation behavior, mechanical properties and biocompatibility of Mg-Sr-Mn alloys for the orthopedic medical applications10.1038/s41529-025-00658-8 ↗
7. Strengthening and toughening mechanisms of martensite-bainite microstructure in 2 GPa ultra-high strength steel during hot stamping10.1007/s11431-024-2901-8 ↗
8. A phase-based approach to optimizing the mechanical and corrosion properties of biodegradable Mg-Zn-Ca alloys10.1016/j.jallcom.2025.181127 ↗
9. Capacitive aptasensor coupled with microfluidic enrichment for real-time detection of trace SARS-CoV-2 nucleocapsid protein10.1021/acs.analchem.1c04296 ↗
10. The influence of adding samarium on the microstructure, mechanical performance and corrosion behavior of as-extruded AZ41 alloys10.1016/j.jpcs.2020.109851 ↗
11. Microstructure, mechanical and corrosion properties of Mg–2Dy–xZn (x= 0, 0.1, 0.5 and 1 at%) alloys10.1016/j.jma.2014.03.002 ↗
12. Effect of Ca micro-alloying on the microstructure and anti-corrosion property of Mg0. 5Zn0. 2Ge alloy10.1007/s40195-024-01703-2 ↗
13. Simultaneous enhancement of thermal conductivity and mechanical properties of EZ42 magnesium alloy by Ca microalloying10.1007/s11665-024-09429-z ↗
14. Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity: application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries10.1016/j.ijplas.2004.05.017 ↗
15. Material rate dependence and localized deformation in crystalline solids10.1016/0001-6160(83)90014-7 ↗
16. Bounds and self-consistent estimates for creep of polycrystalline materials
17. Crystallographic texture evolution in bulk deformation processing of FCC metals10.1016/0022-5096(92)80003-9 ↗
18. Effect of multiaxial forging on microstructure and mechanical properties of Mg-o. 8Ca alloy
19. Hongbo X., Bai J., Ren H., et al. Two-Dimensional Frank-Kasper Z Phase with One Unit-Cell Thickness[J]. 2020.10.21203/rs.3.rs-123163/v1 ↗
20. Villars P., Cenzual K., Daams J., et al. Mg13Zn30Sm3: Structure Types[J]. Structure Types. Part 3: Space Groups (194) P 6 3/mmc-(190) P-62c, 2006: 1-1.10.1007/10920503_384 ↗
21. Comprehensive study on corrosion and discharge performance of Mg–Ca alloy with high Ca content10.1016/j.jmrt.2025.04.024 ↗
22. Error analysis strategy for long-term correlated network systems: generalized nonlinear stochastic processes and dual-layer filtering architecture
23. Effect of iron content on the corrosion of pure magnesium: critical factor for iron tolerance limit10.1016/j.corsci.2018.04.024 ↗
24. Effect of minor Gd addition on microstructure, mechanical performance, and corrosion behavior of Mg–Y–Gd alloys10.1016/j.jmrt.2023.08.166 ↗
25. Microstructure, tensile properties, and corrosion resistance of extruded Mg-1Bi-1Zn alloy: the influence of minor Ca addition10.1016/j.jallcom.2019.152414 ↗
26. Influence of texture distribution in magnesium welds on their non-uniform mechanical behavior: a CPFEM study10.1016/j.jmst.2020.01.035 ↗
27. High temperature strength and hot working technology for as-cast Mg–1Zn–1Ca (ZX11) alloy10.3390/met7100405 ↗
28. Tensile properties from room temperature to 673 K of Mg-0.9 mass% Ca alloy containing lamella Mg2Ca10.2320/matertrans.43.2643 ↗
29. Enhanced mechanical properties and isotropy of Mg-2Al-0.8 Sn alloy through Ca addition10.3390/ma14247557 ↗
30. Construction and analysis of surface phase diagrams to describe segregation and dissolution behavior of Al and Ca in Mg alloys
31. Wilkes R.N. Exploring the effects of thermomechanical processing and surface preparation on the in vitro corrosion performance of Mg-Zn-Ca alloys for biodegradable orthopaedic implants. 2021.
32. Critical resolved shear stresses for slip and twinning in Mg-Y-Ca alloys and their effect on the ductility10.1016/j.ijplas.2023.103525 ↗
33. Murakoshi Y., Kikuchi K., Katoh M., et al. Fabrication and property of degradable magnesium-calcium alloy composites with hydroxyapatite[C]//6th World Congress of Biomechanics (WCB 2010). August 1-6, 2010 Singapore: In Conjunction with 14th International Conference on Biomedical Engineering (ICBME) and 5th Asia Pacific Conference on Biomechanics (APBiomech). Berlin, Heidelberg: Springer Berlin Heidelberg, 2010: 1226-1229.10.1007/978-3-642-14515-5_311 ↗
34. Improving ductility of a Mg alloy via non-basal< a> slip induced by Ca addition10.1016/j.ijplas.2019.04.020 ↗
35. Texture development and dislocation activities in Mg-Nd and Mg-Ca alloy sheets10.1016/j.matchar.2021.111044 ↗
36. ABINIT: first-principles approach to material and nanosystem properties10.1016/j.cpc.2009.07.007 ↗
37. Recent developments in the ABINIT software package10.1016/j.cpc.2016.04.003 ↗
38. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
39. The role of 0.5 wt% Ca or Gd on the microstructure, mechanical behavior and corrosion performance of Mg-Sn-Zn alloys: actual experiments and first-principles calculations10.1016/j.jallcom.2025.179775 ↗
40. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
41. New insights on corrosion behavior of aging precipitates in dilute Mg-Al-Ca alloy by experiments and first-principles calculations10.1016/j.corsci.2023.111254 ↗
42. Initial micro-galvanic corrosion behavior between Mg2Ca and α-Mg via quasi-in situ SEM approach and first-principles calculation10.1016/j.jma.2021.06.017 ↗
43. Effect of Ca addition on the corrosion behavior of Mg–Al–Mn alloy10.1016/j.apsusc.2016.01.283 ↗
44. Effect of minor Ca addition on microstructure and corrosion behavior of Mg–Y–Ca alloys10.1016/j.jmrt.2023.09.112 ↗
45. Formulation of corrosion rate of magnesium alloys using microstructural parameters10.1016/j.jma.2019.12.001 ↗
46. Unraveling the impact of purification and alloying elements on corrosion performance and passivation of magnesium alloys10.1016/j.jma.2024.11.023 ↗
47. Effect of ECAP route type on the microstructural evolution, crystallographic texture, electrochemical behavior and mechanical properties of ZK30 biodegradable magnesium alloy10.3390/ma15176088 ↗
48. The effect of equal-channel angular pressing on microstructure, mechanical properties, and biodegradation behavior of magnesium alloyed with silver and gadolinium10.3390/cryst10100918 ↗
49. Effects of alloying element Ca on the corrosion behavior and bioactivity of anodic films formed on AM60 Mg alloys10.3390/ma10010011 ↗
50. The effect of various Sn and Ca equal proportional addition on the microstructure, mechanical behavior and corrosion performance of Mg alloys
51. Concurrence of high corrosion resistance and strength with excellent ductility in ultrafine-grained Mg-3Y alloy10.3390/ma15217571 ↗
52. Structure, mechanical and corrosion properties of extruded Mg-Nd-Zn, Mg-Y-Zn and Mg-Y-Nd alloys10.1080/02670836.2019.1570680 ↗
53. Mechanical and corrosion properties of Mg-based alloys with Gd addition10.3390/ma12111775 ↗
54. Influence of Sr on microstructure evolution, mechanical and corrosion properties of extruded Mg-2Zn-0.5 Ca alloy10.1016/j.jma.2023.03.008 ↗
55. Characterization of an extruded Mg-Dy-Nd alloy during stress corrosion with C-ring tests10.3390/met10050584 ↗