journal article·2025-11

Design of biodegradable Zn-Ag-xAl alloys: Investigation of microstructure, corrosion, and bacterial sensitivity for urological implants

S. Basit, F.K. Kartal, M.E. İlgazi, E.D. Arisan, Y. Yilmazer, B. Dikici, A.G. Bulutsuz, B. Dalbayrak, R.K. Islamgaliev, H. Yilmazer

Publisher page

Abstract

In this study, micro-alloyed Zn with Ag and Al was cast and homogenized. The novel ternary Zn alloys were fabricated by the casting method under a controlled atmosphere. Following the fabrication process, the bar-shaped samples underwent homogenization heat treatment at a temperature of 350 degrees C for a duration of 16 h. In the alloy design, the silver (Ag) content was maintained at a constant level of 0.5 wt%, while the influence of aluminum (Al) concentration (x = 0, 0.2, 0.4, 0.6, 0.8 wt%) on the microstructure, hardness, in vitro corrosion behavior, biodegradability, and bacterial susceptibility was systematically examined. The microstructure of the alloys was characterized through detailed analysis using optical microscopy (OM), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Additionally, phase identification of the samples was performed using X-ray diffraction (XRD). The degradation behavior of the alloys was systematically evaluated under in vitro conditions, employing electrochemical polarization techniques and immersion tests for durations of up to 21 days in an artificial urine (AU) solution. The highest hardness value was reached in the Zn-0.5Ag-0.4Al sample with a value of 61.5 HV, and no significant change was observed at higher Al content. The highest and lowest icorr values were measured as 5.71 and 1.09 mu A & sdot;cm-2 in the Zn-0.5Ag and Zn-0.5Ag-0.6Al alloys, respectively. In the bacterial susceptibility study, it was observed that the Al content increased the antibacterial activity, and the highest value was found in the Zn-0.5Ag-0.6Al alloy with 15.25 mm in the interaction with E. coli bacteria. In addition, it was observed that the optimization performed in cell tests with mouse embryonic fibroblasts (MEF), human urinary bladder cancer cells (T24), and prostate epithelial cells (PNT1A) was promising, and the highest potential was observed in the Zn-0.5Ag-0.6Al alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Infectious Aortic and Vascular Conditions · Tissue Engineering and Regenerative Medicine

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Clinical and economic implications of urinary tract infections
2. New insights into the prevention of ureteral stents encrustation
3. Frazie · 2016
4. Complications of ureteral stent placement10.1148/radiographics.22.5.g02se081005 ↗
5. Diversification of cell lineages in ureter development10.1681/ASN.2016080849 ↗
6. Advances in ureteral stents
7. Developments in metallic biodegradable stents10.1016/j.actbio.2009.10.006 ↗
8. Ureteral stent-associated complications-where we are and where we are going10.1038/nrurol.2014.340 ↗
9. A comprehensive study on microstructure, in-vitro biodegradability, bacterial sensitivity, and cellular interactions of novel ternary Zn-Cu-xAg alloys for urological applications10.1016/j.jallcom.2023.171290 ↗
10. Update on ureteral stent technology10.1177/1756287209341306 ↗
11. Biological assessment of Zn-Based absorbable metals for ureteral stent applications10.3390/ma12203325 ↗
12. Ureteral stent complications – experience on 50,000 procedures10.25122/jml-2021-0352 ↗
13. Prospects for the research and application of biodegradable ureteral stents: from bench to bedside10.1080/09205063.2018.1498184 ↗
14. Zinc exhibits ideal physiological corrosion behavior for bioabsorbable stents10.1002/adma.201300226 ↗
15. The incidence and clinical impact of stent strut fractures developed after drug-eluting stent implantation10.1016/j.ijcard.2007.02.033 ↗
16. Morphological predictors of restenosis after coronary stenting in humans10.1161/01.CIR.0000019071.72887.BD ↗
17. Incomplete stent apposition and very late stent thrombosis after drug-eluting stent implantation10.1161/CIRCULATIONAHA.106.658237 ↗
18. Iron-manganese: new class of metallic degradable biomaterials prepared by powder metallurgy10.1179/174329008X284868 ↗
19. Fe-Mn alloys for metallic biodegradable stents: degradation and cell viability studies10.1016/j.actbio.2009.11.025 ↗
20. Histological and molecular evaluation of iron as degradable medical implant material in a murine animal model10.1002/jbm.a.34223 ↗
21. Biodegradable metals for cardiovascular stent application: interests and new opportunities10.3390/ijms12074250 ↗
22. The enhancement of mechanical properties and uniform degradation of electrodeposited Fe-Zn alloys by multilayered design for biodegradable stent applications10.1016/j.actbio.2023.02.029 ↗
23. Iron and iron-based alloys for temporary cardiovascular applications10.1007/s10856-015-5473-8 ↗
24. Developing composite of ZE41 magnesium alloy-calcium by friction stir processing for biodegradable implant applications10.1016/j.matpr.2019.06.301 ↗
25. Research and development strategy for biodegradable magnesium-based vascular stents: a review
26. Degradation and antibacterial properties of magnesium alloys in artificial urine for potential resorbable ureteral stent applications10.1002/jbm.a.34741 ↗
27. Corrosion behavior of mg wires for ureteral stent in artificial urine solution10.1016/j.corsci.2021.109567 ↗
28. Tensile testing as a novel method for quantitatively evaluating bioabsorbable material degradation10.1002/jbm.b.32775 ↗
29. A simplified in vivo approach for evaluating the bioabsorbable behavior of candidate stent materials10.1002/jbm.b.31922 ↗
30. A survey of bio-corrosion rates of magnesium alloys10.1016/j.corsci.2009.09.033 ↗
31. Structure, mechanical characteristics and in vitro degradation, cytotoxicity, genotoxicity and mutagenicity of novel biodegradable Zn-Mg alloys10.1016/j.msec.2015.08.015 ↗
32. Biodegradable metals for cardiovascular stents: from clinical concerns to recent Zn-Alloys10.1002/adhm.201501019 ↗
33. Cytotoxicity evaluation of biodegradable Zn-3Mg alloy toward normal human osteoblast cells10.1016/j.msec.2015.01.056 ↗
34. Current status and perspectives of zinc-based absorbable alloys for biomedical applications10.1016/j.actbio.2019.07.034 ↗
35. Zinc in wound healing: theoretical, experimental, and clinical aspects10.1111/j.1524-475X.2006.00179.x ↗
36. In vitro and in vivo corrosion and histocompatibility of pure mg and a Mg-6Zn alloy as urinary implants in rat model10.1016/j.msec.2016.06.017 ↗
37. Cytocompatibility of magnesium alloys with human urothelial cells: a comparison of three culture methodologies10.1021/acsbiomaterials.6b00325 ↗
38. Biodegradation behavior of magnesium and ZK60 alloy in artificial urine and rat models
39. In vivo assessment of biodegradable magnesium alloy ureteral stents in a pig model10.1016/j.actbio.2020.09.023 ↗
40. In vivo degradability and biocompatibility of a rheo-formed Mg–Zn–Sr alloy for ureteral implantation10.1016/j.jma.2020.11.005 ↗
41. Synergetic effects of solute and strain in biocompatible Zn-based and Mg-based alloys10.1016/j.actamat.2019.09.059 ↗
42. MARTINEZ · Investig. Biodegrad. Met. Urol. Appl. · 2020
43. Development of bioabsorbable zinc–magnesium alloy wire and validation of its application to urinary tract surgeries10.1007/s00345-020-03138-7 ↗
44. In vitro degradation of absorbable zinc alloys in artificial urine10.3390/ma12020295 ↗
45. Review of microstructures and properties of zinc alloys
46. The effect of silver on wear behaviour of zinc-aluminium-based ZA-12 alloy produced by gravity casting10.1016/j.matchar.2013.12.015 ↗
47. Effects of ag, cu or ca addition on microstructure and comprehensive properties of biodegradable Zn-0.8Mn alloy10.1016/j.msec.2019.02.044 ↗
48. Mechanical characteristics, in vitro degradation, cytotoxicity, and antibacterial evaluation of Zn-4.0Ag alloy as a biodegradable material
49. Fabrication, mechanical properties and in vitro degradation behavior of newly developed Zn[sbnd]Ag alloys for degradable implant applications10.1016/j.msec.2017.04.023 ↗
50. Relationship between silver concentration with microstructural and mechanical properties of rolled AlZn alloy10.1016/j.msea.2010.02.017 ↗
51. Design of novel Zn-Ag-Zr alloy with enhanced strength as a potential biodegradable implant material10.1016/j.matdes.2019.108154 ↗
52. Novel Zn-based alloys for biodegradable stent applications: design, development and in vitro degradation10.1016/j.jmbbm.2016.03.018 ↗
53. Corrosion studies of li, na and si doped Zn-Al alloy immersed in NaCl solutions10.1016/j.jallcom.2018.07.109 ↗
54. Evaluation of wrought Zn–Al alloys (1, 3, and 5 wt% Al) through mechanical and in vivo testing for stent applications10.1002/jbm.b.33850 ↗
55. Fabrication of biodegradable Zn-Al-Mg alloy: mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities10.1016/j.msec.2016.11.138 ↗
56. Thermal characteristics, mechanical properties, in vitro degradation and cytotoxicity of novel biodegradable Zn-Al-Mg and Zn-Al-Mg-xBi alloys10.1007/s40195-017-0534-2 ↗
57. Corrosion characteristics dictate the Long-Term inflammatory profile of degradable zinc arterial implants10.1021/acsbiomaterials.6b00591 ↗
58. Test Method for Conducting Potentiodynamic Polarization Resistance Measurements, 2020. https://doi.org/10.1520/G0059-97R20.10.1520/G0059-97R20 ↗
59. Shape identification and particles size distribution from basic shape parameters using ImageJ10.1016/j.compag.2008.02.007 ↗
60. R. Humphries, A.M. Bobenchik, J.A. Hindler, A.N. Schuetz, Overview of Changes to the Clinical and Laboratory Standards Institute Performance Standards foor Antimicrobial Susceptibility Testing, M100, 31st Edition, 2021. 〈https://www.fda.gov/drugs/development-resources/antibacterial-susceptibility-test-interpretive-criteria〉.10.1128/JCM.00213-21 ↗
61. Methods for in vitro evaluating antimicrobial activity: a review10.1016/j.jpha.2015.11.005 ↗
62. Fabrication and properties of porous Zn-Ag alloy scaffolds as biodegradable materials10.1016/j.matchemphys.2018.08.023 ↗
63. Microstructural and damp-heat corrosion characteristics of Zn-2 wt%Al solder alloys containing trace ag
64. The grain refining mechanism of cast zinc through silver inoculation10.1016/j.actamat.2014.07.026 ↗
65. Fabrication and characterization of zinc-coated aluminum particle joining materials via zincate treatment10.1007/s10853-024-10421-0 ↗
66. Characteristics of eutectic and near-eutectic Zn–Al alloys as high-temperature lead-free solders10.1007/s10854-019-02687-x ↗
67. Microstructures, mechanical properties and in vitro corrosion behavior of biodegradable zn alloys microalloyed with al, mn, cu, ag and li elements10.1016/j.jmst.2021.06.049 ↗
68. Microstructure, mechanical properties, and biodegradation response of the grain-refined Zn alloys for potential medical materials10.1016/j.jmrt.2021.08.024 ↗
69. Effect of grain refinement on tensile properties of cast zinc alloys10.1007/s11661-015-3229-1 ↗
70. Impact of aqueous exposure to silver nanoparticles on growth performance, redox status, non-specific immunity, and histopathological changes of Nile tilapia, oreochromis niloticus, challenged with aeromonas hydrophila
71. Green tea silver nanoparticles improve physiological motor and cognitive function in BALB/c mice during inflammation10.1016/j.heliyon.2023.e13922 ↗
72. Enhanced mechanical and damping properties of Cu-Modified Al-Ni eutectic alloys: Solid-solution and precipitation hardening effects10.1016/j.heliyon.2024.e38390 ↗
73. Microstructure and mechanical properties of As-Cast Al-10Ce-3Mg-xZn alloys
74. Dislocation densities, arrangements and character from X-ray diffraction experiments10.1016/S0921-5093(00)01685-3 ↗
75. Mechanism of Fatigue-Life extension due to dynamic strain aging in Low-Carbon steel at high temperature10.3390/ma17184660 ↗
76. Annealing twin formation in a cast and annealed Cu-4 at% sn alloy10.1179/cmq.1984.23.2.237 ↗
77. Reed-Hill
78. TECHNICAL NOTE CAUSES OF CATASTROPHIC FAILURE OF HIGH MN STEEL UTILIZED AS CRUSHER OVERLAYING SHIELDS
79. B. Mikulowski’, H.R. Wiixke’, K. Kirchner’, ANNEAL HARDENING OF Zn AND Zn-ALLOYS, n.d.
80. B.M. KepstrumThe effect of zinc on cold rolling textures in cast aluminum, 2016.
81. The effect of the dendritic microstructure on the corrosion resistance of Zn-Al alloys10.1016/j.jallcom.2005.01.035 ↗
82. Effects of mg content on microstructure and electrochemical properties of Zn-Al-Mg alloys10.1016/j.jallcom.2015.05.010 ↗
83. Phase transformations in the Zn-Al eutectoid alloy after quenching from the high temperature triclinic beta phase10.1016/j.matchar.2010.07.014 ↗
84. Review of grain refinement of cast metals through inoculation: theories and developments10.1007/s11661-017-4275-7 ↗
85. Effects of al addition on the structure and mechanical properties of zn alloys10.1016/j.jallcom.2016.06.196 ↗
86. Microstructure evolution and strengthening mechanisms of Fe-23Mn-0.3C-1.5Al TWIP steel during cold rolling10.1016/j.msea.2014.08.051 ↗
87. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
88. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
89. Mechanical behavior and martensitic transformation of an Fe-Mn-Si-Al-Nb alloy10.1016/j.msea.2006.02.150 ↗
90. Corrosion behavior, antibacterial properties and in vitro and in vivo biocompatibility of biodegradable Zn-5Cu-xMg alloy for bone-implant applications10.1016/j.bioadv.2024.214000 ↗
91. Evaluation of a Zn-2Ag-1.8Au-0.2V alloy for absorbable biocompatible materials
92. Study of microstructure and corrosion behavior of cast Zn–Al–Mg alloys
93. Antibacterial metals and alloys for potential biomedical implants
94. Zinc-based alloys for degradable vascular stent applications10.1016/j.actbio.2018.03.005 ↗
95. Investigation of the mechanical and degradation properties of Mg-Sr and Mg-Zn-Sr alloys for use as potential biodegradable implant materials10.1016/j.jmbbm.2011.07.018 ↗
96. A novel biodegradable nanocrystalline zn alloy with exceptional biocompatible and antibacterial properties10.1016/j.jmrt.2023.12.284 ↗
97. Biodegradable mg alloys for orthopedic implants – a review10.1016/j.jma.2021.06.024 ↗
98. Enhanced corrosion resistance and antibacterial property of zn doped DCPD coating on biodegradable mg10.1016/j.matlet.2016.04.035 ↗
99. Antibacterial activity and mechanism of silver nanoparticles on escherichia coli10.1007/s00253-009-2159-5 ↗
100. Antibacterial properties of some metals and alloys in combating coliforms in contaminated water