journal article·2025-10Open access

Additive manufacturing of nano-TiB2 particles reinforced CrCoNi medium-entropy alloy matrix composites with high strength and ductility

Zhaosong Zhang, Shaohua Yan, Qinghua Qin

Abstract

Additive manufacturing (AM) offers a robust approach for the rapid fabrication of CrCoNi medium-entropy alloys (MEAs). However, the mechanical strength of additively manufactured CrCoNi MEAs remains moderate. In this study, a composite material comprising a CrCoNi MEA matrix reinforced with 4 wt% TiB₂ nanoparticles was successfully fabricated using AM techniques. The resulting composite exhibited a yield strength (σ y ) of 1020 MPa and an ultimate tensile strength (UTS) of 1262 MPa, alongside a total elongation (TE) of 4.85 %. Advanced electron microscopy and dislocation-based crystal plasticity modelling were employed to elucidate the deformation mechanisms, revealing that dislocation slip and deformation heterogeneity among individual grains are predominant. The enhancement in strength is mainly ascribed to the synergistic effects of grain boundary strengthening, dislocation strengthening, and Orowan strengthening induced by the TiB₂ nanoparticles. Conversely, the limited ductility is primarily stems from the generation of brittle phases, the localized stress concentrations, and the dislocation accumulation at grain boundaries, all of which collectively contribute to the early onset of failure cracks. This study offers important guidance for developing nanoparticle-strengthened MEA composites, underscoring the capability of additive manufacturing to modulate mechanical performance via controlled microstructural design.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (89)

Show source-provided references
1. Engineering fine grains, dislocations and precipitates for enhancing the strength of TiB2-modified CoCrFeMnNi high-entropy alloy using laser powder bed fusion10.1016/j.jmrt.2023.07.244 ↗
2. Excellent cryogenic temperature strength-ductility synergy in laser-powder-bed-fused TiB2p/CrMnFeCoNi high-entropy composite10.1016/j.matchar.2025.114766 ↗
3. Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility
4. On the real-time atomistic deformation of nano twinned CrCoFeNi high entropy alloy10.1088/1361-6528/ab99ef ↗
5. Boron doped ultrastrong and ductile high-entropy alloys10.1016/j.actamat.2018.04.004 ↗
6. Effect of TiC addition on the microstructure and mechanical properties of FeCoCrNiMn high entropy alloy fabricated by selective laser melting10.1016/j.jallcom.2024.173583 ↗
7. In-situ synthesis Xp/Al0.25CoCrFeNi (X=Al2O3, TiB2, ZrB2) high entropy matrix composites
8. Chemical inhomogeneities in high-entropy alloys help mitigate the strength-ductility trade-off10.1016/j.pmatsci.2024.101252 ↗
9. Enhanced Strength-Ductility combination in laser welding of CrCoNi Medium-Entropy alloy with ultrasonic assistance10.3390/met14090971 ↗
10. High strength-ductility synergy in a laser welded dissimilar joint of CrCoNi medium-entropy alloy and stainless steel
11. Unprecedented combination of strength and ductility in laser welded NiCoCr medium entropy alloy joints
12. Dynamic softening kinetics of Al0.3CoCrFeNi high-entropy alloy during high temperature compression and its correlation with the evolving microstructure and micro-texture10.1016/j.matchar.2023.112693 ↗
13. Effect of microstructure evolution on wear resistance of equal molar CoCrFeNi high-entropy alloy10.1007/s12598-023-02384-z ↗
14. Towards high-entropy alloys with high-temperature corrosion resistance and structural stability10.1016/j.jmst.2023.07.035 ↗
15. Low cycle fatigue performances of Al0.3CoCrFeNi high entropy alloys: in situ neutron diffraction studies on the precipitation effects10.1016/j.intermet.2024.108241 ↗
16. Thermal oxidation characteristics of Fex(CoCrMnNi)100-x medium and high-entropy alloys10.1016/j.intermet.2020.106757 ↗
17. Effect of cu content on the microstructure and corrosion resistance of AlCrFeNi3Cux high entropy alloys10.1016/j.corsci.2023.111313 ↗
18. Achieving exceptional strength-ductility synergy in a 3D-printed CrCoNi medium-entropy alloy with machine-learning assistance10.1016/j.matchar.2025.114990 ↗
19. Additive manufacturing of TiB2-containing CoCrFeMnNi high-entropy alloy matrix composites with high density and enhanced mechanical properties
20. Unlocking theoretical strength and ductility in sapphire nanopillars: insights into size-dependent deformation mechanisms10.1016/j.jallcom.2024.177183 ↗
21. Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures
22. Microstructures and mechanical properties of in-situ FeCrNiCu high entropy alloy matrix composites reinforced with NbC particles10.1016/j.intermet.2020.106983 ↗
23. Synergistic strengthening of FeCrNiCo high entropy alloys via micro-TiC and nano-SiC particles
24. Microstructure and mechanical properties of novel CrCoNi-Al2O3P medium entropy alloy-matrix composites10.1016/j.intermet.2020.107057 ↗
25. Microstructure, mechanical and tribological properties of CoCrFeNiMn high entropy alloy matrix composites with addition of Cr3C210.1016/j.triboint.2020.106436 ↗
26. Effect of TiB2 on the phase composition, microstructure, and tribological properties of AlCoCrFeNi/TiB2 composites10.1007/s11106-021-00195-4 ↗
27. Effect of laser incident energy on the densification and structure-property relationships of additively manufactured CrCoNi medium-entropy alloy10.1080/17452759.2021.1947509 ↗
28. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
29. Evolution of texture during cold -rolling of a CrCoNi medium -entropy alloy, international conference on materials and manufacturing methods (MMM)
30. Linear patterning of high entropy alloy by additive manufacturing10.1016/j.mfglet.2020.03.003 ↗
31. Laser additive manufactured high-performance Fe-based composites with unique strengthening structure10.1016/j.jmst.2020.04.011 ↗
32. Research and development status of in situ field assisted laser additive manufacturing: a review10.1016/j.optlastec.2024.111700 ↗
33. Microstructural mechanisms endowing high strength-ductility synergy in CoCrNi medium entropy alloy prepared by laser powder bed fusion
34. Additive manufacturing of high entropy alloys: a practical review10.1016/j.jmst.2020.11.029 ↗
35. Additive manufacturing of a new non-equiatomic high-entropy alloy with exceptional strength-ductility synergy via in-situ alloying10.1016/j.matdes.2024.112676 ↗
36. Data-fusion for in-situ monitoring and molten state identification during LPBF of NiCoCr medium-entropy alloy
37. Cracking behavior of newly-developed high strength eutectic high entropy alloy matrix composites manufactured by laser powder b e d fusion10.1016/j.jmst.2023.05.003 ↗
38. Small-scale mechanical properties and deformation mechanisms of a laser welded CrCoNi medium-entropy alloy joint
39. Effect of specimen size and crystallographic orientation on the nano/ microscale mechanical properties and deformation behavior of CrCoNi medium-entropy alloy10.1016/j.matdes.2023.112387 ↗
40. Effect of filling materials on the microstructure and properties of hybrid laser welded Al-Mg-Si alloys joints10.1016/j.matchar.2018.07.018 ↗
41. Additive manufacturing of strong and ductile NiCoCr medium-entropy alloy via in-situ alloying nanoparticles
42. A constitutive model for fcc single crystals based on dislocation densities and its application to uniaxial compression of aluminium single crystals10.1016/j.actamat.2004.04.012 ↗
43. An efficient and robust approach to determine material parameters of crystal plasticity constitutive laws from macro-scale stress-strain curves10.1016/j.ijplas.2020.102779 ↗
44. Bridging the gap between microscale and macroscale plasticity in hybrid laser-arc welded joints of aluminium alloy 6061: experimentation and modelling10.1007/s00161-025-01402-y ↗
45. Temperature dependence of mechanical properties of equiatomic NiCoCr medium-entropy alloy printed by selective laser melting10.1016/S1003-6326(24)66490-3 ↗
46. Microstructure and properties of AlCoCrFeNi2.1 eutectic high entropy alloy manufactured by selective laser melting10.1016/j.optlastec.2023.109396 ↗
47. Laser powder bed fusion of nano-TiB2 reinforced FeCoNiCr high-entropy alloy with enhanced strength and firm corrosion resistance10.1016/j.jallcom.2022.167110 ↗
48. A mechanical strong yet ductile CoCrNi/Cr2B composite enabled by in-situ formed borides during laser powder bed fusion
49. Printability and microstructure of the CoCrFeMnNi high-entropy alloy fabricated by laser powder bed fusion10.1016/j.matlet.2018.04.052 ↗
50. Selective laser melting of high strength and toughness stainless steel parts: the roles of laser hatch style and part placement strategy10.1016/j.msea.2018.04.046 ↗
51. Microstructures and mechanical behavior of inconel 718 fabricated by selective laser melting10.1016/j.actamat.2011.12.032 ↗
52. Fabricating CoCrFeMnNi high entropy alloy via selective laser melting in-situ alloying10.1016/j.jmst.2020.01.002 ↗
53. Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: processability, non-equilibrium microstructure and mechanical property10.1016/j.jallcom.2018.02.298 ↗
54. Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting10.1016/j.scriptamat.2018.05.015 ↗
55. Dislocation network in additive manufactured steel breaks strength-ductility trade-off10.1016/j.mattod.2017.11.004 ↗
56. Hydrogen-induced softening and embrittlement in 316L stainless steel fabricated using laser-powder bed fusion10.1016/j.actamat.2024.119959 ↗
57. Unveiling the semicoherent interface with definite orientation relationships between reinforcements and matrix in novel Al3BC/Al composites10.1021/acsami.6b08913 ↗
58. Boron microalloying for high-temperature eutectic high-entropy alloys10.1016/j.actamat.2023.119427 ↗
59. On the mechanism of twin formation in Fe-Mn-C TWIP steels10.1016/j.actamat.2009.12.032 ↗
60. Boron solubility in Fe-Cr-B cast irons10.1016/S0921-5093(02)00449-5 ↗
61. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
62. Mechanism of the Fe3(B,C) and Fe23(C,B)6 solid-state transformation in the hypoeutectic region of the Fe-C-B system10.1016/j.actamat.2016.08.009 ↗
63. Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing10.1016/j.compositesb.2018.07.050 ↗
64. Enhancing mechanical properties of the boron doped Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy via tuning composition and microstructure10.1016/j.jallcom.2021.162852 ↗
65. Cooling rate effect on microstructure and mechanical properties of AlxCoCrFeNi high entropy alloys10.1016/j.matdes.2017.07.008 ↗
66. Lattice-Distortion-Enhanced yield strength in a refractory High-Entropy alloy10.1002/adma.202004029 ↗
67. The influence of alloying, temperature, and related effects on the stacking fault energy10.1007/BF03038370 ↗
68. Mechanical behavior in boron-microalloyed CoCrNi medium-entropy alloy studied by in situ high-energy X-ray diffraction
69. Lattice strain framework for plastic deformation in complex concentrated alloys including high entropy alloys10.1179/1743284715Y.0000000050 ↗
70. Tuning deformation mechanisms of face-centered-cubic high-entropy alloys via boron doping10.1016/j.jallcom.2022.165103 ↗
71. Unusually increased plasticity of additively manufactured ultra-strong CoCrNi medium entropy alloy composite with increasing temperature
72. On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels10.1016/S1359-6454(03)00117-4 ↗
73. An additively manufactured precipitation hardening medium entropy alloy with excellent strength-ductility synergy over a wide temperature range10.1016/j.jmst.2024.02.077 ↗
74. Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement10.1016/j.msea.2017.12.022 ↗
75. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
76. The strain-rate dependence of the Hall-Petch effect in two austenitic stainless steels with different stacking fault energies10.1016/j.msea.2019.04.076 ↗
77. Achieving excellent strength-ductility synergy in twinned NiCoCr medium-entropy alloy via Al/Ta co-doping10.1016/j.jmst.2021.01.060 ↗
78. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
79. Effect of heat treatment patterns on porosity, microstructure, and mechanical properties of selective laser melted TiB2/Al-Si-Mg composite
80. Evading the strength and ductility trade-off dilemma in titanium matrix composites through designing bimodal grains and micro-nano reinforcements10.1016/j.scriptamat.2023.115625 ↗
81. Heterointerface-induced stacking fault/dislocation modulation: a way to enhance work hardening and ductility in micro/ nano-reinforced aluminum composites10.1016/j.ijplas.2025.104357 ↗
82. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗
83. Ultrastrong and ductile additively manufactured precipitation-hardening medium-entropy alloy at ambient and cryogenic temperatures10.1016/j.actamat.2022.118142 ↗
84. Overcoming the strength-ductility trade-off in an additively manufactured CoCrFeMnNi high entropy alloy via deep cryogenic treatment
85. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
86. Energy of slip transmission and nucleation at grain boundaries10.1016/j.actamat.2010.09.032 ↗
87. Elastic moduli and thermal expansion coefficients of medium-entropy subsystems of the CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2018.02.251 ↗
88. Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: microstructure, anisotropic mechanical response, and multiple strengthening mechanism10.1016/j.jallcom.2019.07.106 ↗
89. Fabrication and mechanical properties of TiC reinforced CoCrFeMnNi high-entropy alloy composite by water atomization and spark plasma sintering10.1016/j.jallcom.2018.12.119 ↗