Recycling-inspired design and development of an ultrafine-grained phase-separated high entropy alloy
Source abstract
Abstract
Recycling-inspired design and development of a novel phase-separated high entropy alloy (PS-HEA) Co 20 Cr 26 Fe 20 Mn 20 Ni 14 ) 0.75 Cu 0.25 was carried out in this work. The HEA consisted of Cu-rich FCC1 and Cu-lean FCC2 phases and showed a core-shell morphology in the Cu-lean FCC2 phase due to the precipitation of the Cr-rich tetragonal σ-phase. Heavy cold-rolling resulted in the progressive formation of a banded or elongated morphology, deformation-driven fragmentation and dissolution of the σ-phase, and Cr-supersaturation near the σ-phase. Recrystallization was confined to the individual Cu-rich FCC1 and Cu-lean FCC2 bands, which resulted in considerable mutual hindrance to grain growth and the retention of a remarkable ultrafine microstructure compared to other HEAs. Meanwhile, annealing resulted in the formation of σ-phase nanoprecipitates within the Cu-lean FCC2 phase. Solid solution, Hall-Petch strengthening due to ultrafine microstructure, and Orowan-Ashby strengthening due to the nanoprecipitates resulted in a remarkable improvement in yield strength to ∼850 MPa with an elongation of ∼5–6 %. The results highlighted the potential of PS-HEAs as a novel class of HEAs with tunable microstructure and properties for structural applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
4. Mapping the world of complex concentrated alloys10.1016/j.actamat.2017.06.027 ↗
5. High-entropy alloys10.1038/s41578-019-0121-4 ↗
6. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
7. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
8. Multicomponent high-entropy cantor alloys10.1016/j.pmatsci.2020.100754 ↗
9. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
10. Development of a new high entropy alloy for wear resistance: FeCoCrNiW0.3 and FeCoCrNiW0.3+5at% of c10.1016/j.matdes.2016.11.027 ↗
11. Carbothermal shock synthesis of high-entropy-alloy nanoparticles10.1126/science.aan5412 ↗
12. Multifunctional High-Entropy alloy nanolayer toward Long-Life Anode-Free sodium metal battery10.1002/adma.202413331 ↗
13. First-principles assisted design of high-entropy thermoelectric materials based on half-Heusler alloys10.1063/5.0249228 ↗
14. High-Entropy oxides: fundamental aspects and electrochemical properties
15. High-entropy high-hardness metal carbides discovered by entropy descriptors10.1038/s41467-018-07160-7 ↗
16. Synthesis of two-dimensional transition metal phosphorous chalcogenides and their high-entropy alloys10.1038/s44160-025-00737-3 ↗
17. Eutectic/eutectoid multi-principle component alloys: a review10.1016/j.matchar.2018.07.030 ↗
18. Ultrafine-Grained AlCoCrFeNi2.1 eutectic High-Entropy alloy10.1080/21663831.2016.1160451 ↗
19. Promising properties and future trend of eutectic high entropy alloys10.1016/j.scriptamat.2020.06.022 ↗
20. Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae10.1038/s41467-019-08460-2 ↗
21. Microstructure and mechanical properties of CoCrFeNiZrx eutectic high-entropy alloys10.1016/j.matdes.2017.08.030 ↗
22. Simultaneously enhanced strength-ductility of AlCoCrFeNi2.1 eutectic high-entropy alloy via additive manufacturing10.1016/j.msea.2021.142327 ↗
23. Tuning nanostructure using thermo-mechanical processing for enhancing mechanical properties of complex intermetallic containing CoCrFeNi2. 1Nbx high entropy alloys10.1016/j.msea.2019.138489 ↗
24. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
25. A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength10.1126/sciadv.aat8712 ↗
26. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
27. Deformation-driven bidirectional transformation promotes bulk nanostructure formation in a metastable interstitial high entropy alloy10.1016/j.actamat.2019.01.030 ↗
28. Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy10.1016/j.actamat.2018.10.017 ↗
29. Development and exploration of refractory high entropy alloys—A review10.1557/jmr.2018.153 ↗
30. On the room temperature deformation mechanisms of a TiZrHfNbTa refractory high-entropy alloy10.1016/j.msea.2015.08.024 ↗
31. High-entropy alloys with heterogeneous microstructure: processing and mechanical properties10.1016/j.pmatsci.2020.100709 ↗
32. Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates10.1016/j.scriptamat.2018.01.028 ↗
33. High-temperature age-hardening of a novel cost-effective Fe45Ni25Cr25Mo5 high entropy alloy10.1016/j.msea.2020.139580 ↗
34. Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing10.1016/j.msea.2021.142190 ↗
35. A scrap-tolerant alloying concept based on high entropy alloys10.1016/j.actamat.2020.09.027 ↗
36. Recovery of metals from E-waste: facts, methods, challenges, case studies, and sustainable solutions10.1021/acs.estlett.4c00696 ↗
37. Electrochemical approaches for the recovery of metals from electronic waste: a critical review10.3390/recycling6030053 ↗
38. The steel scrap age10.1021/es303149z ↗
39. The microstructural evolution and hardness of the equiatomic CoCrCuFeNi high-entropy alloy in the semi-solid state10.1016/j.jallcom.2018.02.170 ↗
40. Melting behavior and globular microstructure formation in semi-solid CoCrCuFeNi high-entropy alloys10.1016/j.jmst.2020.04.009 ↗
41. Microstructure evolution and formation mechanism of CoCrCuFeNi high entropy alloy during the whole process of semi-solid billet preparation10.1016/j.jmst.2021.12.044 ↗
42. Phase separation induced heterostructure promotes strength-ductility synergy in Cu-rich compositionally complex alloy in as-cast state
43. Recrystallization behavior of CoCrCuFeNi High-Entropy alloy10.1007/s11661-014-2594-5 ↗
44. Amorphous bands induced by low temperature tension in a non-equiatomic CrMnFeCoNi alloy10.1016/j.actamat.2020.02.024 ↗
45. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
46. D. Karlsson, Laptops and smartphones-a gold mine?: A material flow analysis of small electronics in a Swedish organisation with focus on metal resources. 2021.
47. Horn, D., et al. New efficient recycling process for Li-Ion Batteries, in Conf. on Fut. Automot. Technol. 2018.
48. Enthalpies of formation of liquid (copper+ manganese) alloys10.1007/s11663-997-0114-3 ↗
49. Core-shell-like structure in CoCrCuTiV high-entropy alloy and its effect on compressive property10.1016/j.jallcom.2022.166246 ↗
50. Microstructural evolution from dendrites to core-shell equiaxed grain morphology for CoCrFeNiVx high-entropy alloys in metallic casting mold
51. Formation of core-shell type structure in duplex martensitic steel10.1016/j.scriptamat.2020.10.044 ↗
52. Microstructure and texture of heavily cold-rolled and annealed extremely low stacking fault energy Cr26Mn20Fe20Co20Ni14 high entropy alloy: comparative insights10.1016/j.jallcom.2022.167418 ↗
53. Cryo-rolling and annealing-mediated nano/ultrafine structure, texture, and properties of extremely low stacking-fault energy high entropy alloys: comparative perspectives10.1016/j.jallcom.2023.170025 ↗
54. On strain-induced dissolution of θ′ and θ particles in Al–Cu binary alloy during equal channel angular pressing10.1016/j.msea.2010.12.060 ↗
55. Atomic-scale mechanisms of deformation-induced cementite decomposition in pearlite10.1016/j.actamat.2011.03.022 ↗
56. Dissolution of ag precipitates in the Cu–8wt% ag alloy deformed by high pressure torsion10.3390/ma12030447 ↗
57. Hall-petch relation in a spheroidized carbon steel with emphasis on the effect of intergranular particles10.4028/www.scientific.net/MSF.848.593 ↗
58. Solid solution strengthening theories of high-entropy alloys10.1016/j.matchar.2019.02.034 ↗
59. Dependence of resistivity on temperature and the mechanism of strengthening in a single-phase Cu–12Mn–3Ni alloy10.1016/j.jmrt.2023.11.231 ↗
60. Polycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures10.1016/j.intermet.2014.11.005 ↗