Contribution to plastic forming via the activated unconventional (111) <112> slip system in a novel powder metallurgy nickel-based superalloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Flow behavior and constitutive model for Ni-20.0Cr-2.5Ti-1.5Nb-1.0Al superalloy compressed below γ′-transus temperature10.1016/j.msea.2012.04.042 ↗
2. Secondary γ′ evolution and relationship to hot deformation behavior of a supersolvus-treated superalloy with high precipitate volume fraction10.1016/j.msea.2019.138046 ↗
3. Systematic analysis of distinct flow characteristics and underlying microstructural evolution mechanisms of a novel fine-grained P/M nickel-based superalloy during isothermal compression10.1016/j.jmst.2023.03.042 ↗
4. Spheroidization and dynamic recrystallization mechanisms of a novel HIPed P/M superalloy during hot deformation10.1016/j.jallcom.2022.164909 ↗
5. Abnormal dynamic recrystallization behavior of a nickel based superalloy during hot deformation10.1016/j.jallcom.2019.02.055 ↗
6. Influence of hot isostatic pressing temperature on microstructure and tensile properties of a nickel-based superalloy powder10.1016/j.msea.2012.11.084 ↗
7. Effect of oxygen content of powder on microstructure and mechanical properties of hot isostatically pressed superalloy inconel 71810.1016/j.msea.2006.07.053 ↗
8. Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 71810.1016/S0921-5093(03)00079-0 ↗
9. Hot deformation induced microstructure evolution of a novel as-extruded Ni-based P/M superalloy10.1080/14786435.2020.1829145 ↗
10. The effect of mo on load partitioning and microstrain evolution during compression of a series of polycrystalline Ni-Based superalloys10.1016/j.actamat.2019.07.002 ↗
11. Correlating hot deformation parameters with microstructure evolution during thermomechanical processing of inconel 718 alloy10.1007/s11661-019-05380-0 ↗
12. Microstructural variations and kinetic behaviors during metadynamic recrystallization in a nickel base superalloy with pre-precipitated δ phase10.1016/j.matdes.2019.107584 ↗
13. The role of composition on the extent of individual strengthening mechanisms in polycrystalline Ni-based superalloys10.1016/j.matdes.2019.107760 ↗
14. Dynamic recrystallization behavior of GH4169G alloy during hot compressive deformation10.1016/j.jmst.2019.04.018 ↗
15. Deformation behaviour of an as-cast nickel base superalloy during primary hot working above and below the gamma prime solvus10.1016/j.msea.2019.03.083 ↗
16. Microstructural evolution of a Ni-Co based superalloy during hot compression at γ′ sub-/super-solvus temperatures10.1016/j.jmst.2020.10.042 ↗
17. Superplastic deformation behavior and microstructure evolution of a new extruded nickel-based powder metallurgy superalloy
18. Application of electron backscatter diffraction to grain boundary characterization10.1179/095066004225010514 ↗
19. EBSD study of delta-processed ni-based superalloy10.3390/met10111466 ↗
20. Effect of temperature on the tensile deformation mechanisms of a fourth nickel-based single crystal superalloys10.1016/j.jmrt.2024.04.263 ↗
21. Deformation twinning during high temperature compression tests of the Ni-base superalloy ATI 718Plus®10.1016/j.actamat.2019.12.047 ↗
22. Microstructure evolution during dynamic recrystallization of hot deformed superalloy 71810.1016/j.msea.2007.09.008 ↗
23. Hot deformation behavior of an Al-5.7 wt%Mg alloy with erbium10.1016/j.msea.2009.03.029 ↗
24. Improving the mechanical properties of a novel nickel-based superalloy via the cubic secondary γ′ and the regulation of tertiary γ′10.1016/j.jallcom.2025.179120 ↗
25. Microstructure and microtexture evolution of dynamic recrystallization during hot deformation of a nickel-based superalloy10.1016/j.matdes.2019.108429 ↗
26. Microstructure evolution of high-temperature deformation behavior of nickel based alloys for advanced ultra-supercritical applications10.1016/j.matchemphys.2023.128862 ↗
27. Fractal analysis of mo and nb effects on grain boundary character and hot cracking behavior for Ni-Cr-Fe alloys10.1016/j.matchar.2018.08.024 ↗
28. Work hardening characteristics and microstructural evolution during hot deformation of a nickel superalloy at moderate strain rates10.1016/j.jallcom.2017.03.158 ↗
29. In-situ deformation inhomogeneity and damage evolution of mixed-grain structure with tempered sorbite/bainite in Fe–Cr–Mo–Mn steel10.1016/j.msea.2024.146684 ↗
30. In-situ SEM and EBSD investigation of the deformation behavior of extruded Mg-6Al-1Zn-1.1Sc alloy10.1088/2053-1591/acf190 ↗
31. Segregation-assisted climb of frank partial dislocations: an alternative route to super intrinsic stacking faults in L12-hardened superalloys10.1016/j.actamat.2020.03.056 ↗
32. Deformation mechanisms of a γ′ phase strengthened CoNi-based superalloy at high temperatures10.1016/j.msea.2021.142587 ↗
33. Hot deformation behavior, super plasticity and microstructure evolution of a new hot isostatic pressed nickel-based superalloy10.1016/j.msea.2023.145997 ↗
34. The adiabatic correction factor for deformation heating during the uniaxial compression test
35. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
36. Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of inconel 718 in the absence of δ phase particles10.1016/j.msea.2015.12.102 ↗
37. Discontinuous dynamic recrystallization and nucleation mechanisms associated with 2-, 3- and 4-grain junctions of polycrystalline nickel-based superalloys10.1016/j.matdes.2023.112041 ↗
38. Study on the dynamic recrystallization mechanisms of inconel 740 superalloy during hot deformation10.1016/j.jallcom.2019.153325 ↗
39. Microstructural evolution and dynamic recrystallization of a nickel-based superalloy PM EP962NP during hot deformation at 1150 °C10.1016/j.jmrt.2022.03.033 ↗
40. Evolution of microstructure and texture during hot compression of a Ni-Fe-Cr superalloy10.1007/s11661-011-0889-3 ↗
41. Evolution of twins and sub-boundaries at the early stage of dynamic recrystallization in a Ni-30%Fe austenitic model alloy10.1016/j.msea.2018.07.071 ↗
42. Dynamic recrystallization in Monel400 Ni-Cu alloy: mechanism and role of twinning10.1016/j.msea.2018.12.045 ↗
43. Evolution of microstructure and twin density during thermomechanical processing in a γ-γ’ nickel-based superalloy10.1016/j.actamat.2012.06.028 ↗
44. Dynamic recrystallization mechanisms operating in a Ni-20%Cr alloy under hot-to-warm working10.1016/j.actamat.2010.02.032 ↗
45. Investigation of microstructural stability and tensile deformation behavior of a novel PM Ni-based superalloy during long-term thermal exposure10.1016/j.msea.2024.146457 ↗
46. Temperature-dependent yield strength and deformation mechanism of a casting Ni-based superalloy containing low volume-fraction γ′ phase10.1016/j.jallcom.2022.164187 ↗
47. Influence of hot deformation parameters on the microstructure evolution of low-expansion GH2909 superalloy10.1016/j.matchar.2024.114705 ↗
48. Crack reduction in inconel 939 with si addition processed by laser powder bed fusion additive manufacturing
49. Effects on crack formation of additive manufactured inconel 939 sheets during electron beam welding10.1016/j.vacuum.2021.110649 ↗
50. Tensile deformation behavior of a new Ni-base superalloy at room temperature10.1016/j.msea.2015.12.089 ↗
51. Deformation mechanisms in a fine-grained udimet 720LI nickel-base superalloy with high volume fractions of γ′ phases10.1016/j.msea.2016.07.068 ↗
52. Three-dimensional investigation of particle-stimulated nucleation in a nickel alloy10.1016/j.actamat.2007.05.045 ↗