On the remarkable strengthening and relevant mechanisms of ZK60 Mg alloy via room-temperature multi-directional forging
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength10.1016/j.actamat.2018.03.002 ↗
2. Unveiling the effect of gd content on the dynamic recrystallization behavior and resultant mechanical property of magnesium10.1016/j.msea.2023.145523 ↗
3. Understanding the dynamic recrystallization behaviors of a hot-rolled Mg-1.0wt%Ca plate by compressing along different original orientations
4. Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy10.1016/j.actamat.2020.01.017 ↗
5. Overcoming the trade-off between stretch formability and heat resistance in magnesium via alloying dilute neodymium10.1016/j.jallcom.2021.162666 ↗
6. Achieving extraordinary strength-plasticity synergy in AZ91 alloy processed by multi-degrees of freedom forming10.1016/j.msea.2024.146104 ↗
7. Improving microstructure and ductility in the Mg–Zn alloy system by combinational Ce–Ca microalloying10.1016/j.msea.2014.09.116 ↗
8. Enhancing the creep resistance of a dilute Mg-1.5wt%Nd alloy plate via pre-compression and subsequent peak-aging10.1016/j.jallcom.2020.158590 ↗
9. A review on the effect of rare-earth elements on texture evolution during processing of magnesium alloys10.1007/s10853-016-0371-0 ↗
10. Synergistic enhancement of strength and plasticity in Mg-4.0Zn-1.5Mn magnesium alloy by minor yb addition10.1016/j.msea.2024.146237 ↗
11. Optimized combination of room-temperature formability and high-temperature creep property in a dilute-alloyed mg sheet via tailoring nd solute segregation10.1016/j.msea.2024.146562 ↗
12. High strength Mg-1.4Gd-1.2Y-0.4Zn sheet and its strengthening mechanisms10.1016/j.msea.2019.01.055 ↗
13. Mechanical properties of Ti/Mg bicontinuous composite by liquid metal replacement10.1016/j.scriptamat.2024.116413 ↗
14. Influence of ti particle sizes on microstructure and mechanical behaviors of AZ91-Ti composites under different loading paths10.1016/j.msea.2023.145723 ↗
15. Microstructure and mechanical properties of strength-ductility synergetic SiC/ZK60 composites by a pre-dispersion strategy10.1016/j.jallcom.2024.177702 ↗
16. The microstructure and mechanical properties of multicomponent MgAlCe-LDO nanoparticle reinforced mg matrix composite10.1016/j.jallcom.2024.173676 ↗
17. Ageing behavior of as-cast SiCp/AZ91 mg matrix composites10.1016/j.msea.2016.11.072 ↗
18. Recent research and advances in extrusion forming of magnesium alloys: a review10.1016/j.jallcom.2023.170080 ↗
19. Effects of die motion parameters on the microstructures and mechanical properties of rotary backward extruded AZ80 alloys10.1016/j.jmatprotec.2023.118081 ↗
20. Effect of heterogeneous microstructure on the mechanical properties and deformation behavior of rotating backward extruded ZK61 alloy10.1016/j.jallcom.2022.166920 ↗
21. Substantial improvement in cold formability of concentrated Mg–Al–Zn–Ca alloy sheets by high temperature final rolling10.1016/j.actamat.2021.117328 ↗
22. Texture and stretch formability of AZ61 and AM60 magnesium alloy sheets processed by high-temperature rolling10.1016/j.jallcom.2015.01.148 ↗
23. Enhancement of tensile ductility and stretch formability of AZ31 magnesium alloy sheet processed by cross-wavy bending10.1016/j.jallcom.2013.06.185 ↗
24. Role of one direction strong texture in stretch formability for ZK60 magnesium alloy sheet10.1016/j.msea.2018.05.113 ↗
25. Effect of heat treatment on strain hardening of ZK60 mg alloy10.1016/j.matdes.2010.10.008 ↗
26. Effect of equal channel angular pressing on the mechanical properties of homogenized hybrid AZ61 magnesium composites
27. Effect of pass strain and temperature on recrystallization in magnesium alloy AZ31 after interrupted cold deformation10.1007/s10853-011-6111-6 ↗
28. Grain refinement during isothermal multidirectional forging due to β-phase heterogenization in Al-Mg-based alloys10.1016/j.matlet.2022.132412 ↗
29. Insights into the post-yield microstructure of Mg-Gd-Cu alloy processed by multi directional forging10.1016/j.jallcom.2025.178966 ↗
30. Effect of microstructure on the mechanical properties of ultrafine-grained Cu-Al-Ni alloys processed by deformation and annealing10.1016/j.jallcom.2022.166413 ↗
31. Superplastic properties in a Ti5Al3Mo1.5V Titan alloy processed by multidirectional forging process10.1016/j.matlet.2021.131004 ↗
32. The quantitative effects of temperature and cumulative strain on the mechanical properties of hot-extruded AZ80 mg alloy during multi-directional forging10.1016/j.msea.2021.142036 ↗
33. Anisotropy of mechanical properties and hardness homogeneity in the three orthogonal directions of a multi-directionally forged ZK60 mg alloy10.1016/j.msea.2023.145552 ↗
34. Microstructure and superior mechanical properties of a multi-axially forged WE magnesium alloy10.1016/j.jallcom.2016.09.198 ↗
35. Inhomogeneous microstructure and mechanical anisotropy of multi-directional forged Mg-Gd-Y-Zn-Ag-Zr alloy10.1016/j.msea.2021.140853 ↗
36. Ultra-high tensile strength induced by multiple precipitates in extruded ZK60 alloy via co-alloying ca and er10.1016/j.jallcom.2023.172680 ↗
37. Strengthening of low-cost rare earth magnesium alloy Mg-7Gd-2Y–1Zn-0.5Zr through multi-directional forging10.1016/j.msea.2021.142144 ↗
38. Combination of severe plastic deformation and heat treatment for enhancing the corrosion resistance of a new magnesium alloy10.1016/j.jallcom.2022.166939 ↗
39. Effect of multi-directional hot forging process on the microstructure and mechanical properties of Al–Si based alloy containing high amount of zn and cu10.1016/j.msea.2020.140709 ↗
40. Effect of quasicrystalline phase precipitation on the strengthening and grain refinement of Al-Mg-Mn alloy after multidirectional forging10.1016/j.matlet.2025.138033 ↗
41. Simultaneously improving the deformation tolerance and mechanical properties of AZ80 magnesium alloy through the combination of pre-cryogenic and Multi-directional forging10.1016/j.matlet.2024.136233 ↗
42. Microstructure, texture evolution and yield strength symmetry improvement of as-extruded ZK60 mg alloy via multi-directional impact forging10.1016/j.jma.2021.01.001 ↗
43. Enhancing strength and ductility of low RE content Mg-Gd-Y-Zr alloy via a novel thermomechanical treatment based on multi-directional forging10.1016/j.jallcom.2023.170535 ↗
44. Roles of LPSO phases on dynamic recrystallization of high strain rate multi-directional free forged Mg-Gd-Er-Zn-Zr alloy and its strengthening mechanisms10.1016/j.msea.2023.144590 ↗
45. Strength-plasticity-matched (GNPs+GFs)/Mg–3Zn-0.1Ymagnesium matrix composites with high modulus through liquid-phase dispersion and multistep deformation10.1016/j.coco.2023.101774 ↗
46. Ductility enhancement of EW75 alloy by multi-directional forging10.1016/j.jma.2014.11.005 ↗
47. Effect of forging temperature on the microstructure, subsequent aging precipitation behavior, and mechanical properties of Mg-Gd-Y-Zr-Ag alloy10.1016/j.jmst.2023.09.024 ↗
48. Simultaneously improved modulus, thermal expansion coefficient and wear resistance of a Mg–6Zn–1Gd–0.3Ca matrix composite by adding high volume fraction SiC particles10.1016/j.jmrt.2023.08.143 ↗
49. Structure, texture and strength of Mg-5.8Zn-0.65Zr alloy after hot-to-warm multi-step isothermal forging and isothermal rolling to large strains10.1016/j.msea.2017.10.008 ↗
50. High strength TiCp/Mg-Zn-Ca magnesium matrix nanocomposites with improved formability at low temperature10.1016/j.jallcom.2019.04.028 ↗
51. Improvement of mechanical properties of magnesium alloy ZK60 by integrated extrusion and equal channel angular pressing10.1016/j.actamat.2010.09.043 ↗
52. Effect of heat treatment on the microstructure and mechanical properties of a multidirectionally forged Mg-Gd-Y-Zn-Zr-Ag alloy10.1016/j.jma.2021.08.037 ↗
53. Study on the microstructure and mechanical properties of ZK60 magnesium alloy with submicron twins and precipitates obtained by room temperature multi-directional forging10.1007/s10853-023-08835-3 ↗
54. Microstructure and mechanical properties of ZK60–Yb magnesium alloys10.1016/j.msea.2007.09.027 ↗
55. Correlation between microstructure and tensile behavior in powder metallurgy ZK60 alloys10.1016/j.matlet.2012.07.029 ↗
56. A high-performance Mg-4.9Gd-3.2Y-1.1Zn-0.5Zr alloy via multidirectional forging after analyzing its compression behavior10.1016/j.jmst.2020.08.054 ↗
57. Textures and stretch formability of Mg–6Al–1Zn magnesium alloy sheets rolled at high temperatures up to 793 k10.1016/j.scriptamat.2008.12.035 ↗
58. Effects of grain size and Al-Mn phase on the corrosion performance of hot-rolled AZ31 magnesium alloy10.1007/s10853-024-10396-y ↗
59. Twin recrystallization mechanisms and exceptional contribution to texture evolution during annealing in a magnesium alloy10.1016/j.actamat.2016.12.058 ↗
60. Assessing the potential of sparsely nucleated recrystallized grains to lead grain boundary engineering during extending annealing in alloy 600H
61. Enhancing strength-ductility synergy in heterostructured magnesium alloys by tailoring heterogeneity levels10.1016/j.msea.2025.147906 ↗
62. Mechanical behavior and deformation mechanisms of AZ31 mg alloy at liquid nitrogen temperature10.1016/j.matlet.2013.07.029 ↗
63. Effect of prior heat treatment on the microstructure evolution and creep resistance of ZK60 mg alloy under tensile creep loading along normal direction10.1016/j.msea.2023.144771 ↗
64. Microstructural refinement and mechanical properties improvement of Mg–Al–Mn–Zn–Ca alloy processed by rotary swaging at room temperature10.1016/j.msea.2024.147014 ↗
65. The microstructure evolution, texture weakening mechanism and mechanical properties of AZ80 mg alloy processed by repetitive upsetting-extrusion with reduced deformation temperature10.1016/j.jallcom.2021.160871 ↗
66. Twinning behaviors of a rolled AZ31 magnesium alloy under multidirectional loading10.1016/j.matchar.2016.11.046 ↗
67. Analysis of {10–12} twinning variants’ selection behavior during multi-directional compression in Mg–3Al–1Zn magnesium alloy10.1007/s10853-019-03561-1 ↗
68. Accomplishing the goal of yield isotropy in magnesium with dilute nickel addition and two-pass extrusion10.1016/j.jallcom.2025.179271 ↗
69. Effects of yb concentration on recrystallization, texture and tensile properties of extruded ZK60 magnesium alloys10.1016/j.msea.2020.139609 ↗
70. Activation of non-basal slip in coarse-grained Mg-Sc alloy10.1016/j.scriptamat.2022.114830 ↗
71. Tension-compression asymmetry in hot-rolled Mg-3wt%Gd alloy under creep loading10.1016/j.msea.2021.142124 ↗
72. Ductility enhancement in Mg-0.2%Ce alloys10.1016/j.actamat.2018.09.023 ↗
73. Microstructural evolutions and mechanical properties of Mg-xY-2Nd-0.2Zn-0.5Zr (x = 0, 2, 4, 6 and 8) alloy under hot compression10.1016/j.msea.2019.138816 ↗
74. Current progress in strengthening, plastic deformation and thermal stability of mg alloys10.1016/j.jallcom.2025.179151 ↗
75. Developing a mg alloy with ultrahigh room temperature ductility via grain boundary segregation and activation of non-basal slips10.1016/j.ijplas.2023.103548 ↗
76. Effects of precipitate origin and precipitate-free zone development on the tensile creep behaviors of a hot-rolled Mg-13wt%Gd binary alloy
77. Hot deformation behavior of Mg-5Li-3Al-2Zn-0.2Zr alloy based on constitutive analysis, processing map, and microstructure evolution10.1016/j.jallcom.2023.168983 ↗
78. Crystal structure and stability of phases in Mg-Zn alloys: a comprehensive first-principles study10.1016/j.actamat.2022.118443 ↗
79. Characterization of strengthening precipitate phases in a Mg–Zn alloy10.1016/j.scriptamat.2007.01.006 ↗
80. Effect of precipitates on the dominant active slip systems in Mg-4.5Zn (wt%) alloy10.1016/j.actamat.2024.120231 ↗
81. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys10.1016/S1359-6462(02)00497-9 ↗
82. Dynamic recrystallization behavior and strengthening mechanism of quasi-precipitate-free dilute Mg–Bi–Sn alloy10.1016/j.msea.2022.143553 ↗
83. Influence of grain size and texture on Hall–Petch relationship for a magnesium alloy10.1016/j.scriptamat.2011.08.028 ↗
84. Hall-Petch relationship and deformation mechanism of pure mg at room temperature10.1016/j.jallcom.2022.165924 ↗
85. Hall-Petch relationship, twinning responses and their dependences on grain size in the rolled Mg-Zn and Mg-Y alloys10.1016/j.msea.2018.04.063 ↗
86. Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium10.1016/j.actamat.2015.01.032 ↗
87. Improving the mechanical properties of an age-hardenable magnesium alloy via regulating precipitate scale and building dislocation configuration10.1007/s11661-023-07198-3 ↗
88. Grain refinement due to complex twin formation in rapid hot forging of magnesium alloy10.1016/j.scriptamat.2012.10.007 ↗
89. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
90. Understanding the third element effect on the extruded microstructure and mechanical strength of Mg-1wt%Bi alloy10.1016/j.jallcom.2024.178303 ↗
91. Tracing the effects of calcium, stannum, and zinc additions on the creep resistance of Mg–Al-based alloys10.1007/s11661-023-07050-8 ↗
92. Effects of rare-earth elements gd and y on the solid solution strengthening of mg alloys10.1016/j.jallcom.2009.02.131 ↗
93. Probing the micro-mechanism of precipitate-strengthened alloys with precipitate free zone: an experimental and theoretical study10.1016/j.ijplas.2024.104085 ↗
94. Strain hardening, twinning and texture evolution in magnesium alloy using the all twin variant polycrystal modelling approach10.1016/j.ijplas.2020.102660 ↗
95. Back stress strengthening and strain hardening in gradient structure10.1080/21663831.2016.1153004 ↗
96. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
97. A hysteretic loop phenomenon at strain amplitude dependent damping curves of pre-strained pure mg during cyclic vibration10.1016/j.jallcom.2021.161303 ↗
98. Stress-strain hysteresis and strain hardening during cyclic tensile test of Mg-0.6at%Y alloy10.1016/j.msea.2016.10.008 ↗
99. Anelasticity in cast Mg-Gd alloys10.1016/j.msea.2017.03.094 ↗
100. Micromechanical origin of the enhanced ductility in twinless duplex Mg–Li alloy10.1016/j.msea.2021.141305 ↗