journal article·2025-09

Systematic study of TiC nanoparticle effects on the fatigue behavior of Zn and Zn alloys

Yuxin Zeng, Narayanan Murali, Guan-Cheng Chen, Jingke Liu, Alexander Killips, Chase S. Linsley, Yitian Chi, Xiaochun Li

Publisher page

Abstract

Zinc (Zn) is a promising material for biodegradable implants due to its moderate corrosion rate and superior biocompatibility over magnesium (Mg) and iron (Fe). However, its poor fatigue performance limits broader applications. While nanoparticles were discovered to enhance the fatigue performance of metals, the mechanisms remain underexplored. This study investigates nanoparticle-enabled mechanisms for fatigue improvement in Zn. Specifically, the microstructure, tensile, and fatigue performance of pure Zn and Zn nanocomposites containing 1 vol. % and 2 vol. % titanium carbide (TiC) nanoparticles were examined. Results demonstrated that TiC nanoparticles significantly enhanced fatigue resistance of Zn at room temperature (RT) and body temperature (BT). The improved fatigue performance was partly attributed to enhanced tensile strength. Further analysis, including Basquin's equation fitting and fatigue fracture surfaces examination, showed that TiC nanoparticles significantly enhance fatigue resistance by refining grain structure, impeding dislocation movement, altering crack propagation pathways, and promoting energy dissipation during debonding. Moreover, nanoparticle incorporation reduced the temperature sensitivity of Zn's fatigue behavior, ensuring more stable performance under elevated temperatures. Additionally, Zn nanocomposites like Zn-Al-Cu-TiC and Zn- Mg-TiC maintained suitable biocompatibility and corrosion rates. These findings highlight TiC nanoparticles as a powerful solution to overcome Zn's fatigue limitations for biodegradable medical devices.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: biomechanical and biocorrosion perspectives
2. Recent advances on the mechanical behavior of zinc based biodegradable metals focusing on the strain softening phenomenon10.1016/j.actbio.2022.08.041 ↗
3. Challenges in the use of zinc and its alloys as biodegradable metals: perspective from biomechanical compatibility10.1016/j.actbio.2019.07.038 ↗
4. Gas formation and biological effects of biodegradable magnesium in a preclinical and clinical observation10.1080/14686996.2018.1451717 ↗
5. Mg and mg alloys: how comparable are in vitro and in vivo corrosion rates? A review10.1016/j.actbio.2014.11.048 ↗
6. The effect of hydrogen gas evolution of magnesium implant on the postimplantation mortality of rats
7. Design and characterizations of novel biodegradable ternary Zn-Based alloys with IIA nutrient alloying elements mg, ca and sr10.1016/j.matdes.2015.05.089 ↗
8. Cytotoxicity of corrosion products of degradable Fe-Based stents: relevance of ph and insoluble products10.1016/j.colsurfb.2015.02.047 ↗
9. On the cytocompatibility of biodegradable Fe-Based alloys10.1016/j.msec.2012.11.002 ↗
10. A novel High-Strength and highly corrosive biodegradable Fe-Pd alloy: structural, mechanical and in vitro corrosion and cytotoxicity study10.1016/j.msec.2017.05.100 ↗
11. Structure, mechanical characteristics and in vitro degradation, cytotoxicity, genotoxicity and mutagenicity of novel biodegradable Zn–Mg alloys10.1016/j.msec.2015.08.015 ↗
12. Zn-Mg and Zn-Cu alloys for stenting applications: from nanoscale mechanical characterization to in vitro degradation and biocompatibility
13. Structural and mechanical aspects of hypoeutectic Zn–Mg binary alloys for biodegradable vascular stent applications
14. Novel Zn-Based alloys for biodegradable stent applications: design, development and in vitro degradation10.1016/j.jmbbm.2016.03.018 ↗
15. Microstructure, mechanical properties and in vitro degradation behavior of novel Zn-Cu-Fe alloys10.1016/j.matchar.2017.10.015 ↗
16. The suitability of Zn–1.3%Fe alloy as a biodegradable implant material10.3390/met8030153 ↗
17. Enhancement in mechanical and corrosion resistance properties of a biodegradable Zn-Fe alloy through second phase refinement10.1016/j.msec.2020.111197 ↗
18. Laser additive manufacturing of Zn-2Al part for bone repair: formability, microstructure and properties10.1016/j.jallcom.2019.05.278 ↗
19. Mechanical and corrosion properties of newly developed biodegradable Zn-Based alloys for bone fixation10.1016/j.actbio.2011.05.008 ↗
20. Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications10.1016/j.jmbbm.2017.05.013 ↗
21. Alloying design of biodegradable zinc as promising bone implants for Load-Bearing applications10.1038/s41467-019-14153-7 ↗
22. Mechanical strengthening mechanism of Zn-Li alloy and its mini tube as potential absorbable stent material10.1016/j.matlet.2018.10.001 ↗
23. Zn-Li alloy after extrusion and drawing: structural, mechanical characterization, and biodegradation in abdominal aorta of rat10.1016/j.msec.2017.02.167 ↗
24. Mechanical characteristics, in vitro degradation, cytotoxicity, and antibacterial evaluation of Zn-4.0Ag alloy as a biodegradable material10.3390/ijms19030755 ↗
25. Selective laser melting of Zn–Ag alloys for bone repair: microstructure, mechanical properties and degradation behaviour10.1080/17452759.2018.1458991 ↗
26. Aging kinetics of Heat-Treated Zn-4Al-3Cu alloy10.1016/S1359-6462(99)00130-X ↗
27. Improving the relationship between processing and properties of zinc die casting: developments in creep and ageing correlations10.4271/2011-01-1082 ↗
28. Pola, A., Gelfi, M., La Vecchia, G.M., and Montesano, L., 2015, On the Ageing of a Hyper-Eutectic Zn-Al Alloy. [Online]. Available: 〈https://iris.unibs.it/handle/11379/510677〉. [Accessed: 01-Aug-2024].
29. Novel High-Strength, Low-Alloys Zn-Mg (< 0.1 wt% Mg) and their arterial biodegradation10.1016/j.msec.2017.11.021 ↗
30. Creep properties of biodegradable Zn-0.1Li alloy at human body temperature: implications for its durability as stents10.1080/21663831.2019.1610106 ↗
31. Microstructure, mechanical properties and creep behaviour of extruded Zn-xLi (x = 0.1, 0.3 and 0.4) alloys for biodegradable vascular stent applications10.1016/j.msea.2020.139082 ↗
32. Investigation on the sensitivity of indentation devices for detection of fatigue loading induced damage in bovine cortical bone10.1016/j.jbiomech.2022.111274 ↗
33. Fatigue behavior of biodegradable Zn-Li binary alloys in air and simulated body fluid with pure zn as control10.1016/j.actbio.2023.07.030 ↗
34. Corrosion fatigue behavior and Anti-Fatigue mechanisms of an additively manufactured biodegradable Zinc-Magnesium gyroid scaffold10.1016/j.actbio.2022.09.047 ↗
35. Reifsnider · 2012
36. Influence of nanoparticles addition on the fatigue failure behavior of metal matrix composites: comprehensive review10.1016/j.engfailanal.2023.107751 ↗
37. Fatgiue behavior of metal matrix nanocomposites10.1016/j.ceramint.2020.06.246 ↗
38. Nanoparticle-Enhanced castability of aluminum alloy 2024: fluidity, hot cracking, and surface quality10.1007/s11661-023-07281-9 ↗
39. Effect of TiC Nano-Treating on the fluidity and solidification behavior of aluminum alloy 606310.1016/j.jmatprotec.2023.118241 ↗
40. Nanotechnology-Enabled rapid investment casting of aluminum alloy 707510.1115/1.4065912 ↗
41. Fatigue fracture of Friction-Stir processed Al–Al3Ti–MgO hybrid nanocomposites10.1016/j.ijfatigue.2016.02.007 ↗
42. Zn–Mg–WC nanocomposites for bioresorbable cardiovascular stents: microstructure, mechanical properties, fatigue, shelf life, and corrosion10.1021/acsbiomaterials.1c01358 ↗
43. Nanoparticle-Enabled Zn-0.1Mg alloy with Long-Term stability, refined degradation, and favorable biocompatibility for biodegradable implant devices10.1021/acsami.4c04714 ↗
44. Effect of TiC nanoparticles on a Zn-Al-Cu system for biodegradable cardiovascular stent applications10.1021/acsbiomaterials.3c01714 ↗
45. Dislocation interactions with grain boundaries10.1016/j.cossms.2014.05.004 ↗
46. Dislocation structures and the role of grain boundaries in cyclically deformed ni micropillars10.1016/j.msea.2019.138295 ↗
47. Optimizing the fatigue strength of Ultrafine-Grained Cu-Zn alloys10.1016/j.msea.2016.04.076 ↗
48. Suresh · 1998
49. Effect of high temperature on crack initiation of super austenitic stainless steel 654SMO in very high cycle fatigue10.1016/j.matdes.2020.108750 ↗
50. Thermal activation of fatigue damage10.1007/s11661-000-0053-y ↗
51. Very high cycle fatigue at elevated temperatures: a review on high temperature ultrasonic fatigue10.1016/j.jsse.2022.07.006 ↗
52. A review on isothermal rotating bending fatigue failure: microstructural and lifetime modeling of wrought and additive manufactured alloys10.1111/ffe.14094 ↗
53. Comprehensive Composite Materials, ScienceDirect. [Online]. Available: 〈http://www.sciencedirect.com:5070/referencework/9780080429939/comprehensive-composite-materials〉. [Accessed: 11-Aug-2024].
54. Quantitative study of surface roughness evolution during Low-Cycle fatigue of 316L stainless steel using scanning whitelight interferometric (SWLI) microscopy10.1016/j.ijfatigue.2012.11.009 ↗
55. Biodegradable metals for cardiovascular stents: from clinical concerns to recent Zn-Alloys10.1002/adhm.201501019 ↗
56. Corrosion fatigue behavior of additively manufactured biodegradable porous zinc10.1016/j.actbio.2020.02.001 ↗
57. Fatigue and corrosion fatigue behaviors of biodegradable Zn-Li and Zn-Cu-Li under physiological conditions10.1016/j.jmst.2022.04.051 ↗