Microstructural characteristics of W-Cu composite prepared through novel plasma transferred arc welding technique
Source abstract
Abstract
This study aims to fabricate tungsten–copper (W–Cu) composites—critical for high thermal and electrical applications—using a novel, high-speed, and cost-effective plasma transferred arc (PTA) welding technique, as an alternative to conventional powder metallurgy methods. W–Cu composites were successfully fabricated for the first time as additive beads and deposits on copper substrates using a direct current (DC) tungsten inert gas (TIG) torch in a plasma transferred arc (PTA) welding process. Compared to mild steel, utilizing a Cu baseplate and controlling the interpass temperature resulted in a more homogeneous composite with some distributed porosity. Microstructural observations indicated that W particles impeded the flow of copper into vacant pore areas. Surface melting of tungsten particles was observed, with some particles transforming into slender shapes causing internal porosities. Improved shielding during single additive bead deposition minimized porosity, whereas thicker additive layers led to copper oxidation, causing lack of fusion and oxide inclusions. Transmission electron microscopy (TEM) revealed a distinct boundary between W and CU, with no atomic intermixing across the interface. Overall, the fabrication of W–Cu composites using the plasma transferred arc (PTA) additive manufacturing route was successfully achieved for the first time.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. W–Cu/Cu composite electrodes fabricated via laser surface alloying10.1016/j.matchar.2021.111715 ↗
2. Evolution of mechanical performance with temperature of W/Cu and W/CuCrZr composites for fusion heat sink applications10.1016/j.msea.2017.12.054 ↗
3. Melt infiltrated tungsten–copper composites as advanced heat sink materials for plasma facing components of future nuclear fusion devices10.1016/j.fusengdes.2017.01.042 ↗
4. Challenges for plasma-facing components in nuclear fusion
5. Fabrication of W-Cu functionally graded composites using high energy ball milling and spark plasma sintering for plasma facing components10.1016/j.apt.2020.07.015 ↗
6. Fabrication of electronic packaging grade Cu–W materials by High-Temperature and High-Velocity compaction10.1109/TCPMT.2011.2178243 ↗
7. W–Cu system: synthesis, modification, and applications10.1007/s11106-017-9884-6 ↗
8. Effect of zn and ni added in W–Cu alloy on penetration performance and penetration mechanism of shaped charge liner10.1016/j.ijrmhm.2015.07.022 ↗
9. Effect of interaction mechanism between jet and target on penetration performance of shaped charge liner10.1016/j.msea.2012.06.003 ↗
10. Progress, challenges and potentials/trends of tungsten-copper (WCu) composites/pseudo-alloys: fabrication, regulation and application10.1016/j.ijrmhm.2021.105648 ↗
11. The process of surface carburization and high temperature wear behavior of infiltrated W-Cu composites10.1016/j.surfcoat.2018.08.088 ↗
12. Fabrication of W–Cu composites by microwave infiltration10.1016/j.jallcom.2009.12.011 ↗
13. Thermal properties of W–Cu composites manufactured by copper infiltration into tungsten fiber matrix10.1016/j.ijrmhm.2014.05.022 ↗
14. Activated liquid phase sintering of W–Cu and Mo–Cu10.1016/j.ijrmhm.2015.04.030 ↗
15. Fabrication of W–20wt%Cu alloys by powder injection molding10.1016/j.jmatprotec.2009.08.001 ↗
16. Experimental investigations on the synthesis of W–Cu nanocomposite through spark plasma sintering10.1016/j.jallcom.2015.03.183 ↗
17. Microstructure characters of W-based composites with different immiscible second phases prepared by laser powder bed fusion10.1016/j.jallcom.2022.166982 ↗
18. Selective laser melting W–10 wt% cu composite powders10.1007/s00170-009-2304-4 ↗
19. Transient liquid phase bonding of cu to Cu–W composite using an electron beam energy source10.1016/j.ijrmhm.2006.01.001 ↗
20. W+ cu and W+ ni composites and FGMs prepared by plasma transferred arc cladding10.3390/ma14040789 ↗
21. Research progress on the effect of third components on the microstructure and properties of W-Cu composites10.1007/s11837-023-06270-y ↗
22. Preparation and properties of excellent performance W–Cu alloy with a variety of strengthening mechanisms10.1016/j.msea.2023.145955 ↗
23. A review on the additive manufacturing of W-Cu composites10.3390/met15020197 ↗
24. Tungsten heavy alloys processing via microwave sintering, spark plasma sintering, and additive manufacturing: a review10.3390/pr10112352 ↗
25. POROSITY IN WELDING - DEFECTS / IMPERFECTIONS IN WELDS. 2024 Accessed on 20-03-2024]; Available from: 〈https://www.twi-global.com/technical-knowledge/job-knowledge/defects-imperfections-in-welds-porosity-042〉.
26. Molten pool behaviors and their influences on welding defects in narrow gap GMAW of 5083 Al-alloy10.1016/j.ijheatmasstransfer.2018.05.132 ↗
27. Behavior of porosity and copper oxidation in W/Cu composite produced by plasma spray10.1361/10599630419346 ↗
28. Influence of arc power on Keyhole-Induced porosity in laser + GMAW hybrid welding of aluminum alloy: numerical and experimental studies10.3390/ma12081328 ↗
29. Densified WCu composite fabricated via laser additive manufacturing10.1016/j.ijrmhm.2019.105122 ↗
30. W-Cu composite with high w content prepared by grading rounded w powder with narrow particle size distribution10.3390/ma15051904 ↗
31. Obtaining and characterization of W-Cu composite powder produced by mixing and sintering of ammonium paratungstate (apt) and copper nitrate10.1590/1980-5373-mr-2016-1003 ↗
32. Laser 3D printing of W-Cu composite10.1016/j.matlet.2018.04.114 ↗
33. Effect of scheme of powder feeding into arc on its losses and efficiency of plasma-powder surfacing process10.15407/tpwj2015.06.04 ↗
34. Tungsten/copper composite sheets prepared by a novel encapsulation rolling technique10.1016/j.jallcom.2021.161051 ↗
35. Interfacial thermal conductance between cu and diamond with interconnected W−W2C interlayer10.1021/acsami.2c07190 ↗
36. Effects of particle size, polishing pad and contact pressure in free abrasive polishing10.1016/S0043-1648(96)07275-4 ↗
37. Model of the primary rearrangement processes at liquid phase sintering and selective laser sintering due to biparticle interactions10.1063/1.371321 ↗
38. 14 - sintering of refractory metals