journal article·2025-08Open access

Effect of annealing on the microstructure and properties of a FeMnCoCrNi non-equiatomic high-entropy alloy

Mariusz Hasiak, Amadeusz Łaszcz, Michał Biały, Michał Kawalec, Agnieszka Buczkowska-Fertała, Maciej Towpik, Mateusz Komar

Abstract

The development of non-equiatomic high-entropy alloys offers expanded compositional flexibility compared to conventional and equiatomic systems, though their high-temperature behavior remains underexplored. This study investigates a novel Fe 32 Mn 26 Co 21 Cr 11 Ni 10 alloy in both as-cast and annealed states (annealed at 1130 °C). The alloy exhibits a configurational entropy of 12.60 J/(mol·K), stabilizing a single FCC phase with minimal lattice parameter changes (3.619–3.622 Å) between the two states. Annealing transforms the dendritic microstructure into equiaxed grains with annealing twins, enhancing homogeneity. Thermal analysis confirms remarkable stability up to the solidus temperature of 1283 °C. Interestingly, magnetic properties shift from paramagnetic in the as-cast state to ferromagnetic after annealing, with a high Curie temperature of 842 °C. Nanoindentation reveals hardness increasing from 214–229 HV to 258–270 HV and elastic modulus increasing from 185–192 GPa to 197–225 GPa. Deformed surface analysis via AFM demonstrates the formation of much more pronounced and uniform slip bands in the annealed sample, indicative of improved ductility, enhanced dislocation mobility, and reduced grain boundary density. These results underscore the alloy’s potential for high-temperature magneto-structural applications by combining thermal stability, tunable mechanical properties, and emergent ferromagnetism through microstructural engineering. The findings highlight the critical role of annealing in optimizing performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Alloyed pleasures: multimetallic cocktails
2. Bulk amorphous FC20 (Fe-C-Si) alloys with small amounts of b and their crystallized structure and mechanical properties10.1016/S1359-6454(99)00394-8 ↗
3. History of High-Entropy materials
4. Alloy design strategies and future trends in high-entropy alloys10.1007/s11837-013-0761-6 ↗
5. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
6. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys10.1016/j.actamat.2013.01.042 ↗
7. A map of single-phase high-entropy alloys10.1038/s41467-023-38423-7 ↗
8. Murty · 2019
9. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
10. Cocktail effects in understanding the stability and properties of face-centered-cubic high-entropy alloys at ambient and cryogenic temperatures10.1016/j.scriptamat.2020.06.008 ↗
11. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
12. A combinatorial assessment of AlxCrCuFeNi2 (0 < x < 1.5) complex concentrated alloys: microstructure, microhardness, and magnetic properties10.1016/j.actamat.2016.06.025 ↗
13. Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility10.1016/j.actamat.2017.10.058 ↗
14. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
15. Multicomponent high-entropy cantor alloys10.1016/j.pmatsci.2020.100754 ↗
16. Theory of strengthening in fcc high entropy alloys10.1016/j.actamat.2016.07.040 ↗
17. Analysis of microstructure and microtexture during grain growth in low stacking fault energy equiatomic CoCrFeMnNi high entropy and Ni-60 wt%Co alloys10.1016/j.jallcom.2015.02.184 ↗
18. Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries10.1016/j.intermet.2014.05.014 ↗
19. Grain growth and the Hall-Petch relationship in a high-entropy FeCrNiCoMn alloy10.1016/j.scriptamat.2012.12.002 ↗
20. Atomic-scale homogenization in an fcc-based high-entropy alloy via severe plastic deformation10.1016/j.jallcom.2016.05.337 ↗
21. The fcc solid solution stability in the Co-Cr-Fe-Mn-Ni multi-component system10.1016/j.actamat.2017.02.017 ↗
22. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
23. Processing, microstructure and mechanical properties of the CrMnFeCoNi High-Entropy alloy10.1007/s11837-015-1589-z ↗
24. Mechanical size effects in a single crystalline equiatomic FeCrCoMnNi high entropy alloy10.1016/j.scriptamat.2016.10.026 ↗
25. CrMnFeCoNi high entropy alloys with carbon and nitrogen: mechanical properties, wear and corrosion resistance10.1007/s42452-021-04814-y ↗
26. Twenty years of the CoCrFeNiMn high-entropy alloy: achieving exceptional mechanical properties through microstructure engineering10.1016/j.jmrt.2023.01.181 ↗
27. A fracture-resistant high-entropy alloy for cryogenic applications
28. Grain size dependent mechanical properties of CoCrFeMnNi high-entropy alloy investigated by shear punch testing10.1016/j.jmrt.2023.09.313 ↗
29. Thermally activated deformation and the rate controlling mechanism in CoCrFeMnNi high entropy alloy10.1016/j.msea.2016.11.078 ↗
30. Thermal activation mechanisms and Labusch-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys10.1016/j.actamat.2016.08.047 ↗
31. Elevated-temperature deformation mechanisms in a CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2021.117181 ↗
32. Non-equiatomic high entropy alloys: approach towards rapid alloy screening and property-oriented design10.1016/j.msea.2015.09.010 ↗
33. Design of a twinning-induced plasticity high entropy alloy10.1016/j.actamat.2015.04.014 ↗
34. Strong and ductile Non-equiatomic High-Entropy alloys: design, processing, microstructure, and mechanical properties10.1007/s11837-017-2540-2 ↗
35. Multifunctional Non-Equiatomic high entropy alloys with superelastic, high damping, and excellent cryogenic properties10.1002/adem.201800941 ↗
36. Tensile properties of the Cr-Fe-Ni-Mn non-equiatomic multicomponent alloys with different cr contents10.1016/j.matdes.2015.08.007 ↗
37. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility10.1016/j.scriptamat.2013.09.030 ↗
38. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
39. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
40. Design of non-equiatomic medium-entropy alloys10.1038/s41598-018-19449-0 ↗
41. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
42. de Boer · 1988
43. Proposed model for calculating the standard formation enthalpy of binary transition-metal systems10.1063/1.1499510 ↗
44. Computational thermodynamics aided high-entropy alloy design10.1007/s11837-012-0365-6 ↗
45. Phase engineering of High-Entropy alloys10.1002/adma.201907226 ↗
46. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
47. Overview of high-entropy alloys
48. Effect of annealing temperature on the structure and properties of FeCoCrNiMo high-entropy alloy10.1515/htmp-2022-0048 ↗
49. Annealing-dependent microstructure, magnetic and mechanical properties of high-entropy FeCoNiAl0.5 alloy10.1016/j.msea.2020.139003 ↗
50. In situ studies of non-equilibrium crystallization of AlxCoCrFeNi (x = 0.3, 1) high-entropy alloys10.1016/j.jallcom.2022.166209 ↗
51. Magnetism of CoCrFeNiZrx eutectic high-entropy alloys10.1016/j.intermet.2017.11.017 ↗
52. Laser powder bed fusion printing of CoCrFeMnNi high entropy alloy: processing, microstructure, and mechanical properties10.1007/s44210-024-00035-1 ↗
53. Laser beam welding of a CoCrFeNiMn-type high entropy alloy produced by self-propagating high-temperature synthesis10.1016/j.intermet.2018.02.014 ↗
54. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
55. Comprehensive study of phase transitions in equiatomic AlCoCrFeNi high-entropy alloy10.1016/j.jallcom.2020.158220 ↗
56. Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy10.1016/j.jallcom.2023.171261 ↗
57. Magnetic signatures of structural evolution in amorphous FeZrB alloys: a DSC/M-TG approach
58. Magnetic properties of the CrMnFeCoNi high-entropy alloy10.1103/PhysRevB.96.014437 ↗
59. Effect of deformation on the magnetic properties of CrMnFeCoNi and CrMnFeCoNi-CN High-Entropy alloys10.1007/s11661-024-07514-5 ↗
60. Temperature influence on magnetic characteristics of NdFeB permanent magnets
61. Structural and magnetic transitions of CoFeMnNiAl high-entropy alloys caused by composition and annealing
62. The AC soft magnetic properties of FeCoNixCuAl (1.0 ≤ x ≤ 1.75) high-entropy alloys10.3390/ma12244222 ↗
63. Soft magnetic properties of high-entropy Fe-Co-Ni-Cr-Al-Si thin films10.3390/e18080308 ↗
64. A mechanically strong and ductile soft magnet with extremely low coercivity10.1038/s41586-022-04935-3 ↗
65. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
66. Influence of grain size on mechanical properties of a refractory high entropy alloy under uniaxial tension
67. Role of the structure order in the transport and magnetic properties of high-entropy alloy films10.1038/s41427-023-00518-4 ↗
68. Tailoring ferrimagnetic transition temperatures, coercivity fields, and saturation magnetization by modulating mn concentration in (CoCrFeNi)1−xMnx High-Entropy alloys10.3389/fmats.2022.824285 ↗
69. Identifying slip systems around indentations in FCC metals10.1016/j.scriptamat.2003.08.021 ↗
70. Analysis of dislocation mechanisms around indentations through slip step observations10.1007/s10853-006-0007-x ↗
71. Lattice distortion enabling enhanced strength and plasticity in high entropy intermetallic alloy10.1038/s41467-024-51204-0 ↗
72. Mechanical properties and deformation mechanisms of heterostructured High-Entropy and Medium-Entropy alloys: a review10.3389/fmats.2021.792359 ↗
73. Unusual dislocation behavior in high-entropy alloys10.1016/j.scriptamat.2020.02.021 ↗
74. The origin of jerky dislocation motion in high-entropy alloys10.1038/s41467-022-32134-1 ↗
75. Gaussian Mixture Models
76. Estimating the dimension of a model10.1214/aos/1176344136 ↗
77. Maximum likelihood from incomplete data via the EM algorithm10.1111/j.2517-6161.1977.tb01600.x ↗