Preparation of layered double hydroxide films with corrosion resistance and self-healing properties on Al–Si–Cu alloys using steam coating and immersion processes
Source abstract
Abstract
Low-carbonization and energy saving are required to mitigate global warming . In the automotive industry, weight reduction is required to improve fuel efficiency and driving performance. Al is commonly used to reduce the weight of automotive parts. However, the corrosion resistance of Al alloys is not so high, so they require surface treatment. In this study, MoO 4 2 − -intercalated Mg–Al layered double hydroxide (LDH) films with corrosion resistance and self-healing properties were prepared on a die-cast Al–Si–Cu alloy through steam coating and immersion. The prepared films were characterized via X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and Fourier-transform infrared spectroscopy (FT-IR), among others. The XRD patterns showed that LDH films were successfully prepared on the Al–Si–Cu substrates. The FT-IR spectra revealed that MoO 4 2− ions were intercalated in the LDH film interlayer. The self-healing properties of the LDH films were also investigated. A self-healing film formed over the damaged area of a MoO 4 2− -intercalated LDH film in a 5.0 wt% NaCl aqueous solution for 72 h. XRD pattern and EDS analyses showed that the MoO 3 film formed as a self-healing film. The formation mechanism of this MoO 3 film was also discussed. The corrosion resistance of the LDH films prepared through different immersion times in a 5.0 wt% NaCl aqueous solution was also evaluated via polarization curve measurements. The corrosion resistance of the self-healing films were also evaluated by potentiodynamic polarization curve and electrochemical impedance spectroscopy (EIS) measurements.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Magnesium Oxide Properties and Applications · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Research progress, application and development of high performance 6000 series aluminum alloys for new energy vehicles10.1016/j.jmrt.2024.08.018 ↗
2. Development and low cost control of glass fiber reinforced thermoplastic composites-based electric vehicle tailgate10.1007/978-981-19-8102-9 ↗
3. Effect of sheet configuration on microstructure and mechanical behaviors of dissimilar Al–Mg–Si/Al–Zn–Mg aluminum alloys friction stir welding joints10.1016/j.jmst.2016.10.011 ↗
4. Development and applications of aluminum alloys for aerospace industry10.1016/j.jmrt.2023.09.274 ↗
5. Aluminum use in passenger cars poses systemic challenges for recycling and GHG emissions10.1016/j.resconrec.2022.106827 ↗
6. Preparation of anti-corrosion films by microarc oxidation on an Al–Si alloy10.1016/j.apsusc.2007.01.018 ↗
7. Study of pitting corrosion inhibition effect on aluminum alloy in seawater by biomineralized film10.1016/j.bioelechem.2019.107408 ↗
8. Effect of adsorption of two green biopolymers on the corrosion of aluminum in 1.0 M NaCl solution: physicochemical, spectroscopic, surface and quantum chemical exploration10.1016/j.ijoes.2024.100791 ↗
9. Electrodeposition preparation of ZnAlCe-LDH film for corrosion protection of 6061 Al alloy10.1016/j.matlet.2024.135965 ↗
10. Cu-BTA complexes coated layered double hydroxide for controlled release of corrosion inhibitors in dual self-healing waterborne epoxy coatings
11. Removal of trace levels of arsenic and selenium from aqueous solutions by calcined and uncalcined layered double hydroxides (LDH)10.1021/ie049060u ↗
12. State of the art and current trends on layered inorganic-polymer nanocomposite coatings for anticorrosion and multi-functional applications
13. Enhancing frictional and corrosion resistance performance in aluminum alloy through in situ growth of NiZnAl-LDH membrane and its modification
14. Superior tribological and anti-corrosion performance of corrosion inhibitors intercalated LDH-MAO coating on AZ31 Mg alloys10.1016/j.triboint.2023.109126 ↗
15. Evaluation of MgAl LDH incorporated Gallic acid anti-corrosion impact on mild steel in tempered 3.5% NaCl solutions: integrated electrochemical and morphological studies
16. Comparative Structural, thermodynamic and electronic analyses of Zn-Al-An- hydrotalcite-like compounds (An-=Cl-, F-, Br-, OH-, CO32- or NO3-): An ab initio study10.1016/j.clay.2011.11.014 ↗
17. Ni-Fe-MoO42- LDHs/epoxy resin varnish: a composite coating on carbon steel for long-time and active corrosion protection
18. A comprehensive study on the inhibition behaviour of four carboxylate-based corrosion inhibitors focusing on efficiency drop after the optimum concentration for carbon steel in the simulated concrete pore solution
19. Self-healing vanadate-doped NiAl-layered double hydroxide (LDH) coatings synthesized for active corrosion protection of 2024 aluminum alloy
20. Dual-action smart coatings with a self-healing superhydrophobic surface and anti-corrosion properties10.1039/C6TA10903A ↗
21. Biobased self-healing polyurethane coating with Zn micro-flakes for corrosion protection of AA747510.1016/j.cej.2020.126478 ↗
22. Preparation of fully epoxy resin microcapsules and their application in self-healing epoxy anti-corrosion coatings
23. Mechanically robust and self-healing protective coating for Zn-Al-Mg coated steel enhanced by benzotriazole-5 carboxylic acid intercalated MgAlCe ternary LDH
24. Recent studies on chemical oxide coatings of aluminium10.2464/jilm.32.202 ↗
25. Corrosion resistance of Mg–Al layered double hydroxide container-containing magnesium hydroxide films formed directly on magnesium alloy by chemical-free steam coating10.1039/c3ta11015j ↗
26. Preparation of corrosion resistance films on magnesium alloy by steam coating10.2464/jilm.64.638 ↗
27. Preparation of corrosion resistant film on Mg–6Al–1Zn–2Ca alloy by steam coating10.2464/jilm.67.511 ↗
28. Geoff · 2013
29. Greenwood · 1997
30. The research progress of self-healing coatings for magnesium/magnesium alloy10.1016/j.jallcom.2023.170710 ↗
31. Synthesis and UV absorption properties of 2,3-dihydroxynaphthalene-6-sulfonate anion-intercalated Zn–Al layered double hydroxides10.1016/j.polymdegradstab.2008.09.007 ↗
32. Synthesis and characterization of a UV absorbent-intercalated Zn-Al layered double hydroxide10.1016/j.polymdegradstab.2005.06.006 ↗
33. Molybdenum(VI) equilibria in different ionic media. Formation constants and thermodynamic quantities10.1016/S0020-1693(02)00700-4 ↗
34. The calculation of the thermodynamic equilibrium in Fe3+/MoO42-/H+(OH-)/H2O system and determination of reasonable conditions for iron molybdate deposition
35. Characterization of Mo-6Ta alloy targets and its magnetron sputtering deposited thin film
36. Determination of the long term corrosion behavior of coated steel with A.C. impedance measurements10.1016/0010-938X(83)90064-1 ↗
37. Electrochemical impedance spectroscopy for the measurement of the corrosion rate of magnesium alloys: brief review and challenges10.3390/met10060775 ↗
38. Microstructure and corrosion behavior of Ca/P coatings prepared on magnesium by plasma electrolytic oxidation10.1016/j.surfcoat.2017.04.001 ↗
39. Complex anticorrosion coating for ZK30 magnesium alloy10.1016/j.electacta.2009.08.018 ↗
40. Corrosion behavior of Mg(OH)2/Mg–Al layered double hydroxides/AlO(OH) composite film prepared by steam coating on Mg alloy AZCa61210.1149/1945-7111/ac54db ↗
41. Corrosion behavior of super-hydrophobic surface on copper in seawater10.1016/j.electacta.2007.06.072 ↗
42. Effect of heat treatment on corrosion behavior of AZ63 magnesium alloy in 3.5 wt% sodium chloride solution10.1016/j.corsci.2016.05.019 ↗