High-temperature dual-phase crystal plasticity modeling of Ti-6Al-4V alloy: Insights into anisotropic behavior and microstructural evolution
Source abstract
Abstract
The high-temperature dual-phase anisotropic crystal plasticity model has been established to investigate the anisotropic behavior and microstructural evolution mechanisms of Ti-6Al-4V alloy under elevated temperature conditions. The model was rigorously validated using uniaxial hot tensile testing and comprehensive microstructural analysis , confirming its predictive accuracy. The findings reveal that the yield strength is predominantly influenced by the dislocation density within the prismatic slip systems of the α phase . Moreover, a strong positive correlation between dislocation density and slip shear strain was observed, highlighting their mutual dependence in governing deformation mechanisms . Under diagonal loading conditions, regions of high dislocation density exhibited distinct textural features, further elucidating the material's anisotropic response. These results provide a deeper understanding of the interrelations among dislocation density, yield strength, and slip mechanics, while emphasizing the pivotal role of texture in shaping the anisotropic properties of Ti-6Al-4V alloy under high-temperature conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Phase transition and mechanical performance evolution in TiVZr-Nbx alloys10.1016/j.jallcom.2022.168458 ↗
2. Development of high strength and lightweight Ti6Al4V5Cr alloy: microstructure and mechanical characteristics10.1016/j.jmrt.2023.12.271 ↗
3. Development and applications of aluminum alloys for aerospace industry10.1016/j.jmrt.2023.09.274 ↗
4. Evolution, limitations, advantages, and future challenges of magnesium alloys as materials for aerospace applications10.1016/j.jallcom.2024.176707 ↗
5. Prediction of fatigue life of TC4 titanium alloy based on normalized equivalent initial flaw size model10.1016/j.tafmec.2022.103563 ↗
6. Microstructure and mechanical properties of electron beam welded TC4 titanium alloy structure with backing plate
7. Data-driven texture design for reducing elastic and plastic anisotropy in titanium alloys10.1016/j.actamat.2023.119585 ↗
8. Study on the plastic anisotropy of advanced high strength steel sheet: experiments and microstructure-based crystal plasticity modeling10.1016/j.ijmecsci.2020.105569 ↗
9. Characterization and modeling of biaxial plastic anisotropy in metallic sheets10.1016/j.ijmecsci.2024.109640 ↗
10. In-situ investigation of tensile anisotropy mechanism in an advanced Ti2AlNb-based alloy associated with CRSS ratio and damage model10.1016/j.msea.2023.145894 ↗
11. Analysis of anisotropy mechanism in the mechanical property of titanium alloy tube formed through hot flow forming10.1016/j.jmst.2021.01.038 ↗
12. Evolution of microstructures, dislocation density and arrangement during deformation of low carbon lath martensitic steels10.1016/j.msea.2020.139039 ↗
13. Compositional complexity dependence of dislocation density and mechanical properties in high entropy alloy systems10.1016/j.pnsc.2020.07.002 ↗
14. A correlation between texture evolution and dislocation density in Al-Mg alloys during uniaxial tensile deformation10.1016/j.matlet.2023.134829 ↗
15. Enhanced strength-ductility synergy of medium-entropy alloys via multiple level gradient structures10.1016/j.ijplas.2023.103592 ↗
16. Heterogeneous deformation and damage mechanisms in multi-phase TA15 Ti-alloy: insights from experiments informed damage-crystal plasticity modelling10.1016/j.msea.2022.143444 ↗
17. Plastic deformation of commercially-pure titanium: experiments and modeling10.1016/j.ijplas.2018.02.009 ↗
18. Anisotropy of plasticity in Ti–6Al–4V alloy processed by electron beam direct energy deposition10.1016/j.jmrt.2023.11.039 ↗
19. Texture induced planar anisotropy of dwell fatigue response in titanium: Insights from experiments and crystal plasticity simulations10.1016/j.ijplas.2021.103140 ↗
20. High-temperature anisotropic behaviors and microstructure evolution mechanisms of a near-α Ti-alloy sheet10.1016/j.msea.2021.141560 ↗
21. Effect of α texture on the anisotropy of yield strength in Ti–6Al–2Zr–1Mo–1V alloy fabricated by laser directed energy deposition technique10.1016/j.msea.2021.141771 ↗
22. Study of size effect on anisotropic deformation behavior of rolled α-Ti sheet10.1016/j.msea.2022.143282 ↗
23. A constitutive model for a rate and temperature-dependent, plastically anisotropic titanium alloy
24. Evolving asymmetric and anisotropic hardening of CP-Ti sheets under monotonic and reverse loading: Characterization and modeling10.1016/j.ijplas.2022.103445 ↗
25. Efficient modelling of the elastoplastic anisotropy of additively manufactured Ti-6Al-4V
26. Constitutive modeling of commercial pure titanium sheet based on non-associated flow rule and differential hardening10.1016/j.ijmecsci.2022.107549 ↗
27. A new ANN based crystal plasticity model for FCC materials and its application to non-monotonic strain paths10.1016/j.ijplas.2021.103059 ↗
28. Anisotropic tensile behaviour of additively manufactured Ti-6Al-4V simulated with crystal plasticity10.1016/j.mechmat.2021.104034 ↗
29. Modeling the role of local crystallographic correlations in microstructures of Ti-6Al-4V using a correlated structure visco-plastic self-consistent polycrystal plasticity formulation10.1016/j.actamat.2020.116502 ↗
30. Prediction of anisotropic deformation behavior of TA32 titanium alloy sheet during hot tension by crystal plasticity finite element model10.1016/j.msea.2022.143137 ↗
31. Mechanical anisotropy of selective laser melted Ti-6Al-4V using a reduced-order crystal plasticity finite element model
32. Habit plane determination from reconstructed parent phase orientation maps10.1016/j.actamat.2023.119035 ↗
33. Research on the hot tensile deformation mechanism of Ti-6Al-4 V alloy sheet based on the α+ β dual phase crystal plasticity modeling10.1016/j.jallcom.2022.167701 ↗
34. DREAM. 3D: a digital representation environment for the analysis of microstructure in 3D10.1186/2193-9772-3-5 ↗
35. Spectral solvers for crystal plasticity and multi-physics simulations
36. DAMASK – The Düsseldorf advanced material simulation kit for modelling multi-physics crystal plasticity, damage, and thermal phenomena from the single crystal up to the component scale10.1016/j.commatsci.2018.04.030 ↗
37. A physically-based structure-property model for additively manufactured Ti-6Al-4V10.1016/j.matdes.2021.109709 ↗
38. Analysis of hybrid fracture in α/β titanium alloy with lamellar microstructure10.1016/j.msea.2018.12.007 ↗
39. Image-based crystal plasticity FE framework for microstructure dependent properties of Ti–6Al–4V alloys10.1016/j.msea.2012.06.006 ↗
40. Dislocation density based model for plastic deformation and globularization of Ti-6Al-4V10.1016/j.ijplas.2013.04.003 ↗
41. A dislocation density-based crystal plasticity constitutive model for prismatic slip in α-titanium10.1016/j.actamat.2011.07.053 ↗
42. Effect of dislocation density evolution on the thermomechanical response of metals with different crystal structures at low and high strain rates and temperatures
43. Theoretical model for subsurface microstructure prediction in micro-machining Ti-6Al-4V alloy–Experimental validation10.1016/j.ijmecsci.2018.08.014 ↗
44. Research on high-entropy spinel microwave absorption materials: Exploration of machine learning and experimental integration10.1016/j.ceramint.2024.09.335 ↗
45. Influence of phase morphology, static recrystallization, and crystallographic texture on room temperature tensile properties of Ti–6Al–4V alloy: Comparison between post-tested equiaxed, bimodal, and lamellar microstructures10.1016/j.msea.2023.144990 ↗
46. Microstructure and fatigue crack growth behavior of heat-treated electron beam melted Ti-6Al-4V alloy10.1016/j.ijfatigue.2024.108543 ↗
47. Texture evolution during multi-pass cold rolling and annealing of Ti-2Al-1.5 Mn alloy10.1016/j.jallcom.2023.172705 ↗