Tailoring emission characteristics of Na+-Sc3+ co-substituted CaMgGe2O6:Cr3+ phosphors for iris acquisition
Source abstract
Abstract
The growing interest in Cr 3+-doped broadband infrared phosphors stems from their promising applications in various fields. However, achieving highly efficient broadband emission based on these materials remains a significant challenge. To address this issue, we proposed a cation co-substitution method to enhance the near-infrared (NIR) emission of Cr 3+-doped phosphors while simultaneously broadening the full width at half maximum (FWHM) of their emission peaks, as demonstrated in the case of CaMgGe 2O 6:Cr 3+. Through controlled co-substitution of Ca 2+ and Mg 2+ cations by Na + and Sc 3+ cations, we prepared (Ca, Mg) 1-x(Na, Sc) xGe 2O 6:Cr 3+ (CMS xG:Cr 3+) using a solid reaction method. This approach aims to deliberately adjust the strength of the crystal field experienced by Cr 3+ to regulate the luminescence performance of the corresponding phosphors. Indeed, we observed a red shift of the emission peak from 850 to 902 nm, with the FWHM extending from 163 to 198 nm, as the concentration of ‘Na +-Sc 3+’ pair increased, which would benefit iris acquisition. Importantly, the external quantum yield did not deteriorate; instead, it was enhanced from 13.6 to 26.2 %. Finally, we fabricated a broadband near infrared phosphor converted light-emitting diodes (pc-LED) by integrating CMS xG:Cr 3+ phosphors with commercial 460 nm LEDs. An infrared output power of 118.01 mW at 300.00 mA was achieved with pc-LED based on Ca 0.9Mg 0.88(NaSc) 0.1Ge 2O 6:0.02Cr 3+ phosphor. Clear iris images acquired using these pc-LED as lighting sources demonstrate their potential applications in iris acquisition for biometrics.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Biometric Identification and Security · Nicotinic Acetylcholine Receptors Study · Luminescence and Fluorescent Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Divalent europium-doped near-infrared-emitting phosphor for light-emitting diodes10.1038/s41467-019-13293-0 ↗
2. Enhancing photodynamic therapy through resonance energy transfer constructed near-infrared photosensitized nanoparticles10.1002/adma.201604789 ↗
3. Design, synthesis, and application of a small molecular NIR-II fluorophore with maximal emission beyond 1200 nm10.1021/jacs.0c08187 ↗
4. Physiological responses of cucumber seedlings under different blue and red photon flux ratios using LEDs10.1016/j.envexpbot.2015.04.001 ↗
5. Disorder-order conversion-induced enhancement of thermal stability of pyroxene near-infrared phosphors for light-emitting diodes10.1002/anie.202204411 ↗
6. Fusing the information in visible light and near-infrared images for iris recognition10.1007/s00138-013-0572-3 ↗
7. An efficient human identification through iris recognition system10.1007/s11265-021-01646-2 ↗
8. Relevant features for gender classification in NIR periocular images10.1049/iet-bmt.2018.5233 ↗
9. A high efficiency trivalent chromium-doped near-infrared-emitting phosphor and Its NIR spectroscopy application10.1021/acssuschemeng.0c07946 ↗
10. Multispectral iris analysis: a preliminary study51
11. Iris recognition development techniques: a comprehensive review10.1155/2021/6641247 ↗
12. How iris recognition works10.1109/TCSVT.2003.818350 ↗
13. D. Benalcazar, C. Perez, D. Bastias and K. Bowyer, presented in part at the Iris Recognition: Comparing Visible-Light Lateral and Frontal Illumination to NIR Frontal Illumination, 2019.10.1109/WACV.2019.00097 ↗
14. Advantages of white LED lamps and new detector technology in photometry10.1038/lsa.2015.105 ↗
15. Site engineering strategy toward enhanced luminescence thermostability of a Cr3+-doped broadband NIR phosphor and its application10.1039/D1QM00074H ↗
16. Efficient super broadband NIR Ca2LuZr2Al3O12:Cr3+,Yb3+ garnet phosphor for pc-LED light source toward nir spectroscopy applications10.1002/adom.201901684 ↗
17. Two-site occupation for exploring ultra-broadband near-infrared phosphor-double-perovskite La2MgZrO6:Cr3+10.1021/acs.chemmater.9b01587 ↗
18. Broadband infrared LEDs based on europium-to-terbium charge transfer luminescence10.1038/s41467-020-17469-x ↗
19. Electro-photoluminescence study in InGaAs/AlGaAs multi-quantum-wells10.1209/0295-5075/132/24004 ↗
20. Highly efficient and thermally stable Cr3+-activated silicate phosphors for broadband near-infrared LED applications10.1016/j.cej.2019.123108 ↗
21. Recent progress in engineering near-infrared persistent luminescence nanoprobes for time-resolved biosensing/bioimaging10.1007/s12274-019-2343-6 ↗
22. A K3ScSi2O7:Eu2+ based phosphor with broad-band NIR emission and robust thermal stability for NIR pc-LEDs10.1039/D0CC01838D ↗
23. Eu2+-doped ultra-broadband VIS-NIR emitting phosphor10.1016/j.cej.2020.124231 ↗
24. Supramolecularly engineered NIR-II and upconversion nanoparticles in vivo assembly and disassembly to improve bioimaging10.1002/adma.201804982 ↗
25. Ultrahigh-energy-transfer efficiency and efficient Mn2+ red emission realized by structural confinement in Ca9LiMn(PO4)7:Eu2+,Tb3+ phosphor10.1021/acs.inorgchem.0c01991 ↗
26. Near-infrared emission of CaAl6Ga6O19:Cr3+,Ln3+ (Ln = Yb, Nd, and Er) via energy transfer for c-Si solar cells10.1039/D0DT01623C ↗
27. Broadband near-infrared garnet phosphors with near-unity internal quantum efficiency10.1002/adom.202000296 ↗
28. Review-photoluminescence properties of Cr3+-activated oxide phosphors
29. Near-infrared engineering for broad-band wavelength-tunable in biological window of NIR-Ⅱ and -Ⅲ: A solid solution phosphor of Sr1-xCaxTiO3:Ni2+10.1016/j.jlumin.2021.118235 ↗
30. Site-related near-infrared luminescence in MAl12O19 (M=Ca, Sr, Ba):Fe3+ phosphors10.1016/j.materresbull.2013.11.008 ↗
31. Highly efficient Fe3+-doped A2BB'O6 (A = Sr2+, Ca2+; B, B′ = In3+, Sb5+, Sn4+) broadband near-infrared-emitting phosphors for spectroscopic analysis10.1038/s41377-022-00803-x ↗
32. Novel Cr3+-doped double-perovskite Ca2MNbO6 (M = Ga, Al) phosphor: synthesis, crystal structure, photoluminescence and thermoluminescence properties10.1016/j.jallcom.2019.152656 ↗
33. Design and control of the luminescence in Cr3+-doped NIR phosphors via crystal field engineering10.1016/j.jallcom.2020.156557 ↗
34. Recent advances in chromium-doped near-infrared luminescent materials: fundamentals, optimization strategies, and applications
35. Cooperative cationic substitution strategy triggers high blue-light absorptance and near-infrared emission with high quantum efficiency in Cr3+-activated pyroxene-type assembly10.1016/j.jlumin.2023.120328 ↗
36. Two Selective Sites Control of Cr3+-Doped ABO4 phosphors for tuning ultra-broadband near-infrared photoluminescence and multi-applications10.1002/lpor.202100459 ↗
37. Spectral regulation and efficiency optimization in Cr3+-doped gadolinium aluminum gallium garnet near-infrared ceramic phosphors via crystal-field engineering10.1002/admt.202200519 ↗
38. Ultra-Broadband and high efficiency Near-Infrared Gd3ZnxGa5-2xGexO12:Cr3+ (x = 0-2.0) garnet phosphors via crystal field engineering10.1016/j.cej.2022.135346 ↗
39. Broadband near-infrared (NIR) emission realized by the crystal-field engineering of Y3−xCaxAl5−xSixO12:Cr3+(x= 0-2.0) garnet phosphors10.1039/C9TC05775G ↗
40. Distorted octahedral site occupation-induced high-efficiency broadband near-infrared emission in LiScGe2O6:Cr3+ phosphor10.1039/D1TC03057D ↗
41. A novel germanate based red-emitting phosphor with high efficiency, high color purity and thermal stability for white light-emitting diodes and field emission displays10.1039/C9QI01428D ↗
42. Enhanced and broadened NIR emission of CaZnGe2O6:Cr3+ by Yb3+ codoping for NIR applications10.1021/acsaom.2c00180 ↗
43. Efficient near-infrared pyroxene phosphor LiInGe2O6:Cr3+ for NIR spectroscopy application10.1111/jace.17856 ↗
44. Cr3+ activated garnet phosphor with efficient blue to far-red conversion for pc-LED10.1002/adom.202101134 ↗
45. Enhancement of photoluminescence properties in Na+ doped K2BaPO4F:Sm3+ phosphors10.1016/j.ceramint.2023.11.325 ↗
46. Improving red afterglow properties of CaZnGe2O6: Mn2+ by co-doping Bi3+10.1016/j.ijleo.2021.167799 ↗
47. Small stokes shift and two-site occupation in the ANb2O6:Cr3+ (A = Zn/Mg) phosphors toward highly efficient ultra-broadband near-infrared emission for multifunctional applications
48. High-efficiency short-wave infrared emitter enabled by Cr3+-Yb3+ Co-doped phosphor10.1002/adom.202303221 ↗
49. Efficient Broadband Near-Infrared CaMgGe2O6:Cr3+ phosphor for pc-LED10.1021/acs.inorgchem.2c00798 ↗
50. Consequence of optimal bonding on cation ordering and enhanced near-infrared luminescence in Cr3+-doped pyroxene oxides10.1039/D2TC01792J ↗
51. Synthesis, crystal structure, and enhanced luminescence of garnet-type Ca3Ga2Ge3O12:Cr3+ by codoping Bi3+10.1111/jace.13553 ↗
52. Luminescence characteristics of ultra-broadband near-infrared emission Li3Mg2SbO6:Cr3+ phosphors and their applications in light-emitting diodes10.1016/j.jlumin.2023.120189 ↗
53. Luminescence spectroscopy of Cr3+ in an oxide: a strong or weak crystal-field phosphor?10.1016/j.jlumin.2021.117965 ↗
54. On the Absorption Spectra of Complex Ions. I10.1143/JPSJ.9.753 ↗
55. On the Absorption Spectra of Complex Ions II10.1143/JPSJ.9.766 ↗
56. Review-tanabe-sugano energy-level diagram and racah parameters in Mn4+-activated red and deep red-emitting phosphors10.1149/2.0281912jss ↗
57. New analysis model for the determination of racah and crystal-field splitting parameters: verification and case studies10.1149/2162-8777/ab8879 ↗
58. Practical consideration on Racah parameter and Tanabe-Sugano diagram analyses for Mn4+ and Cr3+-activated phosphors10.1016/j.jlumin.2024.120628 ↗
59. Review-temperature dependence of luminescence intensity and decay time in Cr3+-activated oxide and fluoride phosphors
60. LaMgGa11O19:Cr3+,Ni2+ as blue-light excitable near-infrared luminescent materials with ultra-wide emission and high external quantum efficiency
61. Simultaneous absorption and near-infrared emission enhancement of Cr3+ Ions in MgGa2O4 spinel oxide via anionic F-substitution
62. Radiative and non-radiative transitions of excited Ti3+ cations in sapphire10.1038/s41598-019-55267-8 ↗
63. Design of a novel near-infrared luminescence material Li2Mg3TiO6:Cr3+ with an ultrawide tuning range applied to near-infrared light-emitting diodes10.1021/acssuschemeng.1c07054 ↗
64. Novel red emitting phosphors Mg3Y2Ge3O12:Sm3+ with high color purity and excellent thermal stability used in W-LEDs10.1016/j.jallcom.2020.154176 ↗
65. Design of broadband near-infrared Y0.57La0.72Sc2.71(BO3)4:Cr3+ phosphors based on one-site occupation and their application in NIR light-emitting diodes10.1039/D1TC01508G ↗
66. Enhancing infrared photoluminescence performance via Li+ substitution and Yb3+ codoping in Na3ScSi3O9:Cr3+ phosphor10.3390/cryst13071000 ↗
67. Dopant and compositional modulation triggered long-wavelength ultra-broadband and tunable NIR emission in MgO: Cr3+ phosphor for NIR spectroscopy applications10.1016/j.ceramint.2022.08.346 ↗
68. Ultra-broad near-infrared emitting phosphor liInF4: Cr3+ with extremely weak crystal field10.1021/acs.inorgchem.3c01162 ↗
69. Ultra-broad NIR emission from two-site Cr3+ occupation in fluoride phosphor via composition-driven structural transformation
70. Trivalent chromium ions doped fluorides with both broad emission bandwidth and excellent luminescence thermal stability10.1021/acsami.1c01417 ↗