journal article·2023-11

Phase equilibrium studies of Mo-Y2O3-ZrO2-Zr at 1200 ℃ for developing Y-Zr-O complex oxide dispersion-strengthened Mo alloys

Liying Yao, Seiji Miura, Ken-ichi Ikeda

Publisher page

Abstract

Phase equilibria of the Mo-Y 2O 3-ZrO 2 -Zr section in the Mo-Y-Zr-O system at 1200 ℃ were studied for developing nanostructured Y-Zr-O complex oxide dispersion-strengthened Mo alloys and understanding the formation behavior of oxides. The evolution of intermetallic Mo 2Zr and the powder composition of this Mo alloy during mechanical alloying (MA) were revealed. The results showed that the Mo-Y 2O 3-Zr section was confirmed by four kinds of two-phase regions (Mo) + αY 2O 3 and ( βZr) + αY 2O 3 and three-phase regions (Mo) + αY 2O 3 + Mo 2Zr and ( βZr) + αY 2O 3 + Mo 2Zr. These three-phase equilibria were associated with the four-phase equilibria of (Mo) + αY 2O 3 + Mo 2Zr + ( αZr) with a high concentration of O in ( αZr). During MA, Mo 2Zr was dissolved in the Mo matrix, and the introduced excess O and ZrO 2 contaminants shifted alloy composition from Mo-Y 2O 3-Zr to Mo-Y 2O 3-ZrO 2. The Mo-Y 2O 3-ZrO 2 section was characterized by six kinds of two-phase regions Mo + βZrO 2, Mo + γZrO 2, Mo + Zr 3Y 4O 12, and Mo + αY 2O 3, three-phase regions Mo + βZrO 2 + γZrO 2 and Mo + γZrO 2 + Zr 3Y 4O 12. The established Mo-Y 2O 3-ZrO 2 -Zr phase diagram suggests that the presence of excess Zr and insufficient O can bring about the formation of brittle Mo 2Zr and Zr phase, and the Y/Zr ratio strongly determines the type of Y-Zr-O precipitates in Mo alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Improving accident tolerance of nuclear fuel with coated Mo-alloy cladding10.1016/j.net.2015.12.003 ↗
2. B. Cheng, P. Chou, Y.J. Kim, Development of Mo-based accident tolerant LWR fuel cladding No. IAEA-TECDOC 2016 1797.
3. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility10.1038/nmat3544 ↗
4. Enhanced mechanical properties and thermal stability of hot-rolled Mo-0.5% ZrC alloy10.1016/j.msea.2022.143803 ↗
5. Excellent high-temperature strength and ductility of the ZrC nanoparticles dispersed molybdenum10.1016/j.actamat.2022.117725 ↗
6. The swelling, microstructure, and hardening of wrought LCAC, TZM, and ODS molybdenum following neutron irradiation10.1016/j.jnucmat.2011.05.055 ↗
7. The influence of fast neutron irradiation and irradiation temperature on the tensile properties of wrought LCAC and TZM molybdenum10.1016/j.jnucmat.2005.06.016 ↗
8. Post-irradiation fracture toughness of unalloyed molybdenum, ODS molybdenum, and TZM molybdenum following irradiation at 244 °C to 507 °C10.1016/j.jnucmat.2013.05.027 ↗
9. The change in the hardness of LCAC, TZM, and ODS molybdenum in the post-irradiated and annealed conditions10.1016/j.jnucmat.2009.04.025 ↗
10. Coupling effect of intergranular and intragranular particles on ductile fracture of Mo-La2O3 alloys10.1016/j.msea.2015.05.032 ↗
11. A novel approach for strengthening Cu-Y2O3 composites by in situ reaction at liquidus temperature10.1016/j.msea.2013.07.007 ↗
12. Effects of titanium concentration and tungsten addition on the nano-mesoscopic structure of high-Cr oxide dispersion strengthened (ODS) ferritic steels10.1016/j.jnucmat.2013.04.090 ↗
13. Effect of zirconium addition on the microstructure and mechanical properties of ODS ferritic steels containing aluminum10.1016/j.jnucmat.2013.10.038 ↗
14. Structure and composition of oxides in FeCrAl ODS alloy with Zr addition10.1080/02670836.2017.1318245 ↗
15. TEM and HRTEM study of oxide particles in an Al-alloyed high-Cr oxide dispersion strengthened steel with Zr addition10.1016/j.jnucmat.2013.10.028 ↗
16. Precipitation of various oxides in ODS ferritic steels10.1007/s10853-019-03516-6 ↗
17. Effect of Zr and Al addition on nanocluster formation in oxide dispersion strengthened steel-An ab initio study10.1016/j.jallcom.2018.07.047 ↗
18. Radiation tolerance of complex oxides10.1126/science.289.5480.748 ↗
19. Precipitation from solid solutions
20. Microstructure and tensile properties of ODS ferritic steels mechanically alloyed with Fe2Y10.1016/j.nme.2016.09.019 ↗
21. Improvement of 9Cr-ODS martensitic steel properties by controlling excess oxygen and titanium contents10.1016/j.jnucmat.2004.04.043 ↗
22. Thermodynamic assessment of the Mo-Zr system10.1361/1054971023604242 ↗
23. Okamoto · J. Phase Equilibria Diffus. · 2007 · 28 · 49810.1007/s11669-007-9154-2 ↗
24. Thermodynamic calculation of the ZrO2-YO1.5-CaO phase diagram10.1016/0364-5916(92)90011-L ↗
25. Thermodynamic modeling of the ZrO2-YO1.5 system10.1016/j.ssi.2004.02.017 ↗
26. T. Gӧtsch, W. Wallisch, M. Stӧger-Pollach, B. Klӧtzer, S. Penner, From zirconia to yttria: Sampling the YSZ phase diagram using sputter-deposited thin films, AIP Advances, 6 (2016) 025119.10.1063/1.4942818 ↗
27. F.K. Fan, A.K. Kuznetsov, É.K. Keler, Phase relationships in the system Y2O3-ZrO2, Bulletin of the Academy of Sciences of the USSR, Division of Chemical Science, 12 (1963) 542–549.10.1007/BF00843937 ↗
28. Subsolidus phase equilibria and ordering in the system ZrO2-Y2O310.1111/j.1151-2916.1983.tb09961.x ↗
29. Thermodynamic assessment of the ZrO2-YO1.5 system10.1111/j.1151-2916.1991.tb07142.x ↗
30. Assessment of thermodynamic parameters in the system ZrO2-Y2O3-Al2O310.1515/ijmr-2004-0148 ↗
31. Phase equilibria and ordering in the system ZrO2-Y2O310.1111/j.1151-2916.1978.tb09220.x ↗
32. Neumann · 2011
33. Preparation of nanostructural oxide dispersion strengthened (ODS) Mo alloy by mechanical alloying and spark plasma sintering, and its characterization10.1016/j.ijrmhm.2022.105822 ↗
34. Omega phase in materials10.1016/0079-6425(82)90002-0 ↗
35. Hanawa, Microstructure and magnetic susceptibility of as-cast Zr-Mo alloys10.1016/j.actbio.2009.09.013 ↗
36. Microstructure and mechanical properties of mechanically alloyed ODS copper alloy for fusion material application10.1016/j.nme.2018.05.019 ↗
37. Development and characterization of a new ODS ferritic steel for fusion reactor application10.1016/j.jnucmat.2009.05.013 ↗
38. Incidence of mechanical alloying contamination on oxides and carbides formation in ODS ferritic steels10.1016/j.jnucmat.2013.03.090 ↗
39. Effects of extrusion temperature on the nano-mesoscopic structure and mechanical properties of an Al-alloyed high-Cr ODS ferritic steel10.1016/j.jnucmat.2011.01.061 ↗
40. On the role of alloy composition and processing parameters in nanocluster formation and dispersion strengthening in nanostructured ferritic alloys10.1016/j.actamat.2008.09.025 ↗
41. The effect of Zr, Ti addition on the particle size and microstructure evolution of yttria nanoparticle in ODS steel10.1016/j.powtec.2017.06.041 ↗