journal article·2022-03

Fabrication of low interface dipole layer on Al2O3/SiO2/Si structure by densification of interfacial layer

Ryun Na Kim, Hye Won Yun, Jinho Lee, Seong-Ho Baek, Woo-Byoung Kim

Publisher page

Abstract

Abstract Interfacial defects and electrical characteristics were analyzed to confirm the formation of dipole due to the densification of the SiO2 buffer layer and the resulting movement of the flat-band voltage. Through the NAOS, the SiO2 layer was densified without any change in thickness, and the suboxide density after the NAOS decreased from 2.23 × 1014 atoms / cm2 (PE-CVD) to 1.33 × 1014 atoms / cm2 (PE-CVD+NAOS). In addition, both electrical and interfacial defects decreased after NAOS and PMA. From these results, the SiO2 buffer layer through the NAOS was densified and the interface defect state density was reduced. The PE-CVD sample with low atomic density had a dipole layer strength of 0.799 V before PMA, but it was 0.457 V in the case of PE-CVD+NAOS with high atomic density due to the densification of the SiO2 buffer layer. Also, both samples were reduced to 0.488 V and 0.422 V after PMA. Based on this, the leakage current of PE-CVD was measured to be 3.05 × 10-5 A/cm2, and the leakage current of PE-CVD+NAOS was measured that the difference in about four orders of magnitude was 1.64 × 10-9 A/cm2. Through the densification of the SiO2 layer, the interface atomic density increased, and consequently, the dipole layer strength decreased, thereby improving the electrical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · ZnO doping and properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Annealing effect on the metal gate effective work function modulation for the Al/TiN/SiO2/p-Si structure10.1016/j.mee.2010.06.029 ↗
2. Controlling the TiN electrode work function at the atomistic level: a first principles investigation10.1109/ACCESS.2020.3017726 ↗
3. Remote plasma-enhanced atomic layer deposition of metallic TiN films with low work function and high uniformity10.1116/1.5025557 ↗
4. Understanding the impact of interface reaction on dipole strength at MgO/SiO2 and Y2O3/SiO2 interfaces10.7567/JJAP.55.04EB11 ↗
5. Investigation of the interface between silicon nitride passivations and AlGaN/AlN/GaN heterostructures by C (V) characterization of metal-insulator-semiconductor-heterostructure capacitors10.1063/1.3428442 ↗
6. Modification of the Terman method for determination of interface states in metal–insulator–semiconductor structures10.1088/2399-6528/aa8cf8 ↗
7. Characterization of interface states in Al2O3/AlGaN/GaN structures for improved performance of high-electron-mobility transistors10.1063/1.4859576 ↗
8. Accurate modeling of gate tunneling currents in Metal-Insulator-Semiconductor capacitors based on ultra-thin atomic-layer deposited Al2O3 and post-metallization annealing10.1016/j.tsf.2017.07.031 ↗
9. Electrical characterization of P b centers in (100) Si–SiO 2 structures: The influence of surface potential on passivation during post metallization anneal10.1063/1.373759 ↗
10. Improved interface and electrical properties by inserting an ultrathin SiO2 buffer layer in the Al2O3/Si heterojunction10.1002/adfm.201807271 ↗
11. Analysis of electrical, dielectric and thermal performance of NiFe/SiO2/Si MOS device fabricated by liquid phase epitaxy10.1016/j.mssp.2019.104652 ↗
12. Thickness measurement of a thin hetero-oxide film with an interfacial oxide layer by X-ray photoelectron spectroscopy10.1016/j.apsusc.2011.11.110 ↗
13. Low temperature formation of SiO2 thin films by nitric acid oxidation of Si (NAOS) and application to thin film transistor (TFT)10.1016/j.mee.2009.03.080 ↗
14. Densification of∼ 5 nm-thick SiO2 layers by nitric acid oxidation10.1016/j.apsusc.2017.03.292 ↗
15. Dipole formation and electrical properties according to SiO2 layer thickness at an Al2O3/SiO2 interface10.1021/acs.jpcc.1c03730 ↗
16. KSCN-induced interfacial dipole in black TiO2 for enhanced photocatalytic CO2 reduction10.1021/acsami.9b06264 ↗
17. Polymer adsorbed layer promotes dipole ordering in gate dielectrics for organic field-effect transistors10.1021/acs.jpcc.1c01950 ↗
18. Interfacial dipole in organic and perovskite solar cells10.1021/jacs.0c07439 ↗
19. Experimental evidence for the flatband voltage shift of high-k metal-oxide-semiconductor devices due to the dipole formation at the high-k∕ Si O 2 interface10.1063/1.2904650 ↗
20. Origin of electric dipoles formed at high-k/SiO 2 interface10.1063/1.3110968 ↗
21. Low-temperature crystallization of silicon films directly deposited on glass substrates covered with yttria-stabilized zirconia layers10.1143/JJAP.49.105801 ↗
22. Sivaram · 2013
23. Principles of precursor design for vapour deposition methods10.1016/j.poly.2015.08.024 ↗
24. Band bending in semiconductors: chemical and physical consequences at surfaces and interfaces10.1021/cr3000626 ↗
25. Properties of thick SiO2/Si structure formed at 120C by use of two-step nitric acid oxidation method10.1016/j.apsusc.2008.03.025 ↗
26. Nitric acid oxidation method to form a gate oxide layer in sub-micrometer TFT10.1149/1.3572285 ↗
27. Nitric acid oxidation of Si to form ultrathin silicon dioxide layers with a low leakage current density10.1063/1.1621720 ↗
28. High Quality SiO2–like Layers by Large Area Atmospheric Pressure Plasma Enhanced CVD: Deposition Process Studies by Surface Analysis10.1002/ppap.200900033 ↗
29. P. Song, J. Lian, S. Gao, P. Li, X. Wang, S. Wu, Z. Ma, PECVD grown SiO2 film process optimization, in: 2011 Symposium on Photonics and Optoelectronics (SOPO), IEEE, 2011, pp. 1–4.10.1109/SOPO.2011.5780651 ↗
30. High quality PECVD SiO2 process for recessed MOS-gate of AlGaN/GaN-on-Si metal–oxide–semiconductor heterostructure field-effect transistors10.1016/j.sse.2016.04.016 ↗
31. CVD of Al2O3 thin films using aluminum tri‐isopropoxide10.1002/cvde.200306248 ↗
32. Top-gate microcrystalline silicon TFTs processed at low temperature (<200° C)10.1016/j.tsf.2005.01.070 ↗
33. Submicrometer Inversion-Type Enhancement-Mode InGaAs MOSFET With Atomic-Layer-Deposited Al2O3 as Gate Dielectric10.1109/LED.2007.906436 ↗
34. Morphology of TiN thin films grown on SiO2 by reactive high power impulse magnetron sputtering10.1016/j.tsf.2011.07.041 ↗
35. Thermal oxidation of structured silicon dioxide10.1149/2.003405jss ↗
36. Ultrahigh-temperature rapid thermal oxidation of 4H-SiC (0001) surfaces and oxidation temperature dependence of SiO2/SiC interface properties10.1063/1.4967002 ↗
37. Charge trapping analysis of metal/Al 2 O 3/SiO 2/Si, gate stack for emerging embedded memories10.1109/TDMR.2017.2659760 ↗
38. A review on dielectric breakdown in thin dielectrics: silicon dioxide, high‐k, and layered dielectrics10.1002/adfm.201900657 ↗
39. Properties of thin films of high-k oxides grown by atomic layer deposition at low temperature for electronic applications
40. Photoactivated high-k lanthanum oxide-aluminum oxide (La2O3–Al2O3) alloy-type gate dielectrics for low-voltage-operating flexible transistors10.1016/j.jallcom.2020.155671 ↗