Advances in copper wire bonding technology: Material optimization, interfacial strength bonding interface reliability, and corrosion resistance
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Evolution of free-air balls characteristics of the palladium-coated copper wire affected by the palladium coating structure10.1016/j.vacuum.2024.113977 ↗
2. Research progress on bonding wire for microelectronic packaging10.3390/mi14020432 ↗
3. Substructural phenomena in Cu wire bond after laser assisted manufacturing in electronic packaging10.1016/j.matlet.2019.126833 ↗
4. Multi-response optimization of IC wire bonding for large probe marks by the RSM and desirability function approach10.1007/s00170-022-10253-9 ↗
5. A novel integrated approach to optimize copper wire bonding processes and manufacturing10.1007/s12008-022-00844-x ↗
6. Effect of Au coating on the electrolytic migration of ag bonding wires for electronic packaging applications
7. A review of silver wire bonding techniques10.3390/mi14112129 ↗
8. Effects of process parameters on bond properties of Ag-2.35Au-0.7Pd-0.2Pt-0.1Cu alloy wire10.3390/mi14081587 ↗
9. 500 μm heavy micro-alloyed Cu wire for IGBT application: the study on microstructure characteristics, electrical fatigue fracture mechanism and bonding reliability10.1016/j.microrel.2024.115512 ↗
10. Modeling of the impact of mechanical stress resulted from wafer probing and wire bonding on circuit under pad10.1016/j.microrel.2023.115240 ↗
11. Corrosion-induced degradation and its mechanism study of Cu–Al interface for Cu-wire bonding under HAST conditions10.1016/j.jallcom.2020.154046 ↗
12. Microstructural characterization of alloyed palladium coated copper wire under high temperature10.1016/j.microrel.2021.114125 ↗
13. State-of-the-art of the bond wire failure mechanism and power cycling lifetime in power electronics10.1016/j.microrel.2023.115060 ↗
14. Study on structural characteristics of composite coating on copper substrate wire surface10.1016/j.vacuum.2025.114121 ↗
15. Copper Wire Bonding: A Review10.3390/mi14081612 ↗
16. Solving bump bonding issues with 2.0 mil copper wire: a study on FSM integration and workability improvements10.1016/j.microrel.2025.115628 ↗
17. Simulation study on the effect of palladium layer thickness and temperature on the bonding properties of palladium coated copper wire10.1016/j.microrel.2024.115515 ↗
18. Influence of top-side metal layers on the performance of gold, silver, and copper wire bonds on aluminum pads10.1016/j.microrel.2025.115615 ↗
19. Oxidation resistance mechanism of copper wire regulated by nano-palladium coating10.1016/j.apsusc.2024.161425 ↗
20. Effects of different inhibitor on antioxidation of copper bonding wire at room temperature10.1007/s10854-022-08042-x ↗
21. Thermal ageing monitoring in CuAl intermetallic joints through electrical resistance drift: comparative study of lifetime potential in pure and alloyed copper wires10.1016/j.microrel.2025.115660 ↗
22. Research progress of palladium-plated copper bonding wire in microelectronic packaging10.3390/mi14081538 ↗
23. Bonding wire characterization using non-destructive X-ray imaging10.1016/j.microrel.2023.115177 ↗
24. Enhancing fine pitch, high I/O devices with copper ball bonding
25. Stitch bond strength study in insulated Cu wire bonding10.1179/1432891714Z.0000000001018 ↗
26. Overview of wire bonding using copper wire or insulated wire10.1016/j.microrel.2010.06.003 ↗
27. Characterisation of insulated Cu wire ball bonding10.1179/1432891714Z.0000000001019 ↗
28. Insulated Cu wire free air ball characterization10.1016/j.microrel.2014.03.015 ↗
29. Microelectronic wire bonding with insulated Au wire: effects of process parameters on insulation removal and crescent bonding10.2320/matertrans.MRA2008087 ↗
30. Mechanism of resistance microwelding of insulated copper wire to phosphor bronze sheet10.2320/matertrans.M2011013 ↗
31. G. Zhang, Bonded Copper Wire Technology for Semiconductor Packaging, New Technologies and New Products of China (10), 70-72, 10.13612/j.cnki.cntp.2021.10.022.
32. J. Wu, L. Luo, The Developments and Challenges of Cu Bonding Wire, Electronic Product Reliability and Environmental Testing 26(6), 39-42, 10.13612/j.cnki.cntp.2021.10.022.
33. M.N. Ching, K.J. Lee, Influence of nitrogen and forming gas towards palladium coated copper wire, 13th Electronics Packaging Technology Conference,Singapore, 2011, pp. 318–323, 10.1109/EPTC.2011.6184437.10.1109/EPTC.2011.6184437 ↗
34. J. Fan, J. Cao, W. Gao, Z. Liu, Effect of coating speed and annealing on properties of direct Pd-coated copper bonding wire, Heat Treatment of Metals 41(8), 89-93,10.13251/j.issn.0254-6051.2016.08.020.
35. R. Tang, M. Zhang, K. He, K. He, J. Chen, H. Li, Influence of Immersion Time on Coating Quality of Palladium⁃ Plated Oxygen⁃ Free Copper Wire, Shanghai Metals (04), 34-39,10.19947/j.issn.1001-7208.2023.05.13.
36. Effect of halogen-free direct coating process on fire air ball morphology of palladium-coated copper wire
37. A study of the sulfidation behavior on palladium-coated copper wire with a flash-gold layer (PCA) after wire bonding10.3390/electronics8070792 ↗
38. Copper wire bonding concerns and best practices10.1007/s11664-013-2576-1 ↗
39. Interfacial evolution and bond reliability in thermosonic Pd coated Cu wire bonding on aluminum metallization: effect of palladium distribution10.1016/j.microrel.2016.04.003 ↗
40. Microstructural indicators for prognostication of copper–aluminum wire bond reliability under high-temperature storage and temperature humidity10.1109/TCPMT.2015.2495164 ↗
41. P. Lall, Y. Luo, L. Nguyen, Multiphysics-modeling of corrosion in copper-aluminum interconnects in high humidity environments, 65th Electronic Components and Technology Conference, San Diego, CA, 2015, pp. 1045–1056, https://doi.org/10.1109/ECTC.2015.7159724.10.1109/ECTC.2015.7159724 ↗
42. A review of palladium coated copper wire bonding for automotive device10.24247/ijmperdjun2020424 ↗
43. Copper wire in automotive: key challenges and robust validation
44. Descartin, L. Zhang, J.Li, Palladium coated Cu wire: A robust material for die to die Cu WB interconnect, 15th International Conference on Electronic Packaging Technology, Chengdu, China, 2014, pp. 186–190, https://doi.org/10.1109/ISAF.2014.6917842.10.1109/ICEPT.2014.6922633 ↗
45. F. Carson, J.H. Yee, S.S. Park, E. Fontanilla, Study of Pd mixing during Pd-Cu wire ball formation and impact on wire bond quality, 62nd Electronic Components and Technology Conference, San Diego, CA, USA, 2012, pp. 1939–1944, https://doi.org/10.1109/ECTC.2012.6249104.10.1109/ECTC.2012.6249104 ↗
46. M. Eto, T. Uno, T. Haibara, R. Oishi, T. Yamada, T. Oyamada, Thermal Bond Reliability of High Reliability New Palladium-Coated Copper Wire, 67th Electronic Components and Technology Conference, Orlando, FL, USA, 2017, pp. 1297–1302, https://doi.org/10.1109/ECTC.2017.65.10.1109/ECTC.2017.65 ↗
47. Enhancing bondability with coated copper bonding wire10.1016/j.microrel.2010.04.014 ↗
48. Wire bonding of Cu and Pd coated Cu wire: bondability, reliability, and IMC formation
49. R.A. Melanio, R.B. Cervantes, S.E. Dipasupil, Increasing package robustness with palladium coated copper wire, 37th International Electronics Manufacturing Technology & 18th Electronics Materials and Packaging Conference, 2016, pp. 1–7, https://doi.org/10.1109/IEMT.2016.7761950.10.1109/IEMT.2016.7761950 ↗
50. Mechanical and electrical properties of palladium-coated copper wires with flash gold10.1007/s11664-017-5355-6 ↗
51. Corrosion study and intermetallics formation in gold and copper wire bonding in microelectronics packaging10.3390/cryst3030391 ↗
52. Growth of CuAl intermetallic compounds in Cu and Cu(Pd) wire bonding
53. Mechanisms of electrical fatigue and oxidation corrosion failure of micro-alloyed copper wire10.1016/j.mseb.2024.117301 ↗
54. A technology for bonding Cu wires with Cu pads: structure and electrical fatigue mechanism of fine micro-alloyed Cu wires10.1007/s11664-023-10381-2 ↗
55. Mechanisms for high strength and ultra-high electrical conductivity of Cu-3.5wt%Ag alloy prepared by thermomechanical treatment
56. Microstructure evolution of melt-extracted copper alloy wires10.1016/j.matlet.2023.135820 ↗
57. Comparative reliability studies and analysis of Au, Pd-coated Cu and Pd-doped Cu wire in microelectronics packaging
58. Evolution and investigation of copper and gold ball bonds in extended reliability stressing10.1007/s13404-014-0135-z ↗
59. Development of a lead-free solder: Sn-4.0 Bi-3.7 Ag-0.9 Zn10.1108/09540911111099668 ↗
60. Study of copper free air ball in thermosonic copper ball bonding
61. Free Air Ball Consistency of Palladium Coated Copper Wire10.4071/isom-2010-WP4-Paper3 ↗
62. Effect of Process Parameters on Free Air Ball Integrity in Copper and Palladium-Coated Copper Bonding Wires10.4071/imaps.460 ↗
63. More uniform Pd distribution in free-air balls of Pd-coated Cu bonding wire using movable flame-off electrode10.1016/j.microrel.2014.10.004 ↗
64. Palladium-Coated and Bare Copper Wire Study for Ultra-Fine Pitch Wire Bonding10.1149/05201.0717ecst ↗
65. High temperature storage reliability of palladium coated copper wire in different EFO current settings10.1016/j.microrel.2017.10.036 ↗
66. Effect of Pd distribution on Pd-plated Cu wire using different electronic flame off settings10.1007/s10854-016-6099-4 ↗
67. The mechanism of Pd distribution in the process of FAB formation during Pd-coated Cu wire bonding10.1007/s10854-018-9508-z ↗
68. W. Koh, T.K. Lee, H.S. Ng, K.S. Goh, H.M. Ho, Investigation of palladium coverage on bonded balls of palladium-coated copper wires, 12th International Conference on Electronic Packaging Technology and High Density Packaging, 2011, pp. 1–7, 10.1109/ICEPT.2011.6066818.10.1109/ICEPT.2011.6066818 ↗
69. Extended reliability of gold and copper ball bonds in microelectronic packaging10.1007/s13404-013-0087-8 ↗
70. Characteristic of copper wire and transient analysis on wirebonding process10.1016/j.microrel.2010.11.008 ↗
71. C.J. Hang, W.H. Song, I. Lum, M. Mayer, Y. Zhou, C.Q. Wang, J.T. Moon, J. Persic, Effect of electronic flame off parameters on copper bonding wire: Free-air ball deformability, heat affected zone length, heat affected zone breaking force, Microelectron. Eng, 86(10), 2094-2103, https://doi.org/10.1016/j.mee.2009.01.085.10.1016/j.mee.2009.01.085 ↗
72. J. Fan, F. He, J. Cao, D. Yuan, X. Wu, X. Yang, Q. Yao, Effects of Mechanical Properties of Pd-plated Copper Wire on Morphologies and Strength of Bonding Points, Special Casting & Nonferrous Alloys (09), 1261-1265, 10.15980/j.tzzz.2023.09.018.
73. Bond Wire Fatigue of Au, Cu, and PCC in Power LED Packages10.3390/mi14112002 ↗
74. Mechanism of microweld formation and breakage during Cu–Cu wire bonding investigated by molecular dynamics simulation10.1088/1674-1056/ac0e24 ↗
75. Statistical analysis on the mechanical and micro-structural characteristics of thermosonic Cu Al interconnection10.1016/j.microrel.2020.113664 ↗
76. New observation of nanoscale interfacial evolution in micro Cu–Al wire bonds by in-situ high resolution TEM study10.1016/j.scriptamat.2015.12.025 ↗
77. S. Murali, N. Srikanth, C.J. Vath III, An analysis of intermetallics formation of gold and copper ball bonding on thermal aging, Mater. Res. Bull 38(4), 637-646, https://doi.org/10.1016/S0025-5408(03)00004-7.10.1016/S0025-5408(03)00004-7 ↗
78. Numerical and experimental correlation of high temperature reliability of gold wire bonding to intermetallics (Au/Al) uniformity10.1016/j.tsf.2005.09.121 ↗
79. Role of aging temperature on thermomechanical fatigue lifetime of solder joints in electronic systems10.1108/SSMT-07-2020-0029 ↗
80. Effects of aging on microstructure evolution and mechanical properties of high-temperature Zn-4Al-3Mg solder10.1108/SSMT-10-2013-0025 ↗
81. Analysis of Cu-wire pull and shear test failure modes under ageing cycles and finite element modelling of Si-crack propagation10.1016/j.microrel.2014.04.004 ↗
82. A Novel Numerical Multiphysics Framework for the Modeling of Cu-Al Wire Bond Corrosion under HAST Conditions
83. Effects of Cu/Al intermetallic compound (IMC) on copper wire and aluminum pad bondability10.1109/TCAPT.2003.815121 ↗
84. Comparison of ultrasonic wire bonding process between gold and copper by nonlinear structure analysis10.1080/01694243.2018.1463651 ↗
85. Reliability of Copper, Gold, Silver, and PCC Wirebonds Subjected to Harsh Environment
86. Influence of post-bonding heating process on the long-term reliability of Cu/Al contact10.1016/j.microrel.2021.114058 ↗
87. Principal Components Regression Model for Prediction of Acceleration Factors for Copper-Aluminum Wirebonds Subjected to Harsh Environments
88. H. Leong, F.Z. Mohd, M.R. Ibrahim, W.B. Kid, N. Khan, Yap Boon Kar, L.C. Tan, Development of insulated Cu wire ball bonding, 35th IEEE/CPMT International Electronics Manufacturing Technology Conference, Ipoh, Perak, Malaysia, 2012, pp. 1–5, https://doi.org/10.1109/IEMT.2012.6521829.10.1109/IEMT.2012.6521829 ↗
89. Effects of Pd addition on the interfacial reactions between Cu and Al during ultrasonic welding10.1007/s10854-019-01729-8 ↗
90. Behavior of palladium and its impact on intermetallic growth in palladium-coated Cu wire bonding10.1016/j.actamat.2012.09.030 ↗
91. Understanding improved pitting corrosion resistance under high temperature application leading to a newly developed palladium coated copper wire10.1016/j.microrel.2025.115696 ↗
92. A review of high-temperature electronics technology and applications10.1007/s10854-015-3459-4 ↗
93. Influences of hygrothermal conditions and structure parameters on moisture diffusion behavior in a system-in-package module by moisture-thermal-mechanical-coupled finite element modeling
94. Failures on DC–DC modules following a change of wire bonding material from gold to copper10.1016/j.microrel.2015.07.032 ↗
95. Corrosion-Induced Mass Loss of Cu9Al4 at the Cu-Al Ball–Bond Interface: Explained Based on Full Immersion of Cu, Al, and Cu-Al Intermetallic Galvanic Couples10.1007/s11664-018-6625-7 ↗
96. Corrosion-induced fracture of Cu–Al microelectronics interconnects10.1088/1361-651X/ad33de ↗
97. Electrochemical migration behavior between Cu and Ag under a thin electrolyte layer containing chloride10.1108/ACMM-11-2023-2924 ↗
98. R. Rongen, A. Van IJzerloo, A. Mavinkurve, G.M. O’Halloran, Degradation of Cu-Al wire bonded contacts under high current and high temperature conditions using in-situ resistance monitoring, 65th Electronic Components and Technology Conference, San Diego, CA, 2015, pp. 1396–1402, https://doi.org/10.1109/ECTC.2015.7159780.10.1109/ECTC.2015.7159780 ↗
99. Challenges and developments of copper wire bonding technology10.1016/j.microrel.2011.12.013 ↗
100. Effects of electrolyte towards copper wire metallurgical interconnection in semiconductor10.1088/1742-6596/2169/1/012013 ↗