Self-generating lubricious oxides for friction reduction in FeCoNiMo and CrCoNiMo from room temperature to 1000 °C
Source abstract
Abstract
For decades, reducing wear failure in metals and alloys in high-temperature, oxidizing environments has been a critical challenge due to their thermal softening, loose oxidation layers, and inability to use solid lubricants . Thus, the formation of self-generating lubricious tribo-oxide layers is highly desirable for reducing friction and wear in materials without additives. Here, we introduce Mo to two popular medium-entropy alloys (MEAs, i.e., FeCoNi and CrCoNi) and develop two Mo-containing MEAs (i.e., FeCoNiMo and CrCoNiMo). We measure the coefficients of friction (CoFs) and wear rates of the alloys from room temperature to 1000 °C and characterize the wear tracks. For both MEAs, the incorporation of 3d transition metal cations into MoO 3 considerably enhances the lubricity, maintaining CoFs below 0.4 from room temperature to 1000 °C, with the lowest CoFs of ∼0.10 at 800 °C and 1000 °C for CrCoNiMo. From room temperature to 600 °C, FeCoNiMo shows higher wear resistance than CrCoNiMo, attributed to the rapid formation of glaze layers consisting of Fe-based spinel oxides and molybdates . At 800 °C and 1000 °C, the wear resistance of FeCoNiMo significantly decreases due to the instability of the glaze layer and the volatility of MoO 3 . In contrast, CrCoNiMo shows higher wear resistance than FeCoNiMo at 800 °C and 1000 °C, due to the formation of a stable glaze layer composed of NiO-(Ni,Co)MoO 4 and an underlying chromite layer. We demonstrate a strategy to enhance the high-temperature wear resistance of multicomponent alloys by forming lubricious and stable tribo-oxidation layers.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · High Entropy Alloys Studies · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (88)
Show source-provided references
1. Early wear detection and its significance for condition monitoring10.1016/j.triboint.2021.106946 ↗
2. High-temperature materials for power generation in gas turbines
3. Meetham · 2000
4. High-Temperature Solid Lubricants and Self-Lubricating Composites: A Critical Review10.3390/lubricants10080177 ↗
5. Self-lubricating laser claddings for reducing friction and wear from room temperature to 600°C10.1016/j.wear.2018.05.001 ↗
6. Influence of graphite content on the dry sliding behavior of nickel alloy matrix solid lubricant composites10.1016/j.triboint.2017.04.042 ↗
7. Tribological behaviour of graphite-reinforced FeNiCrCuMo high-entropy alloy self-lubricating composites for aircraft braking energy applications10.1007/s11249-019-1193-4 ↗
8. In situ formation of spherical MoS2 particles on high-entropy alloy coating for low friction10.1016/j.matchemphys.2023.127761 ↗
9. Tribological performances of CoCrFeNiAl high entropy alloy matrix solid-lubricating composites over a wide temperature range10.1016/j.triboint.2021.106912 ↗
10. Effect of laser scanning velocity on the microstructure and wear resistance of laser nitride h-BN self-lubricating
11. Atomistic insights into the role of graphene sheets in CoCrNi/graphene composites10.1016/j.actamat.2025.120809 ↗
12. Layer thickness dependent deformation mechanisms of graphene/high entropy alloy laminates upon nano-mechanical contact10.1016/j.msea.2024.146951 ↗
13. The synergistic lubricating mechanism of Sn-Ag-Cu and C60 on the worn surface of M50 self-lubricating material at elevated loads10.1016/j.jallcom.2018.11.021 ↗
14. Research on synergistic lubrication effect of silver modified Cu–Ni-graphite composite
15. Silver based composite coatings with improved sliding wear behaviour10.1016/j.wear.2012.05.014 ↗
16. Lubricious oxide coatings for extreme temperature applications: a review10.1016/j.surfcoat.2014.05.064 ↗
17. Formation of a self-lubricating layer by oxidation and solid-state amorphization of nano-lamellar microstructures during dry sliding wear tests10.1016/j.actamat.2018.12.049 ↗
18. A crystal chemical approach to the formulation of self-lubricating nanocomposite coatings10.1016/j.surfcoat.2005.08.054 ↗
19. Erdemir · A Cryst. -Chem. Approach Lubr. Solid oxides * · 2000
20. The role of surface oxidation in friction processes on molybdenum nitride thin films10.1016/j.surfcoat.2004.07.119 ↗
21. Magnéli phase formation of PVD Mo-N and W-N coatings10.1016/j.surfcoat.2006.07.067 ↗
22. Binary and ternary lubricious oxides for high temperature tribological applications: A review
23. Catastrophic oxidation mechanism of hyper duplex stainless steel S32707 at high temperature in air10.1016/j.matchar.2018.08.041 ↗
24. Fracture of sigma phase containing Co–Cr–Ni–Mo medium entropy alloys10.1016/j.jallcom.2020.156189 ↗
25. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
26. On the formation of hierarchical microstructure in a Mo-doped NiCoCr medium-entropy alloy with enhanced strength-ductility synergy10.1016/j.scriptamat.2019.08.036 ↗
27. Suzuki hardening and segregation in Co0.95Cr0.8Fe0.25Ni1.8Mo0.475 high-entropy alloys10.1016/j.scriptamat.2022.115260 ↗
28. Relationship between the unique microstructures and behaviors of high-entropy alloys10.1007/s12613-023-2777-4 ↗
29. Role of Mo on microstructure evolution and dry-sliding wear mechanism of CoCrNi-based laser cladding coatings10.1016/j.intermet.2024.108599 ↗
30. Effect of mo element on the mechanical properties and tribological responses of cocrfenimox high-entropy alloys
31. Optimization of mechanical and tribological properties of FCC CrCoNi multi-principal element alloy with Mo addition10.1016/j.vacuum.2018.01.012 ↗
32. Investigation into reciprocating dry sliding friction and wear properties of bulk CoCrFeNiMo high entropy alloys fabricated by spark plasma sintering and subsequent cold rolling processes: Role of Mo element concentration
33. Microstructure evolution and enhanced mechanical properties of additively manufactured CrCoNi medium-entropy alloy composites10.1016/j.jallcom.2022.167169 ↗
34. Nb and Mo influencing the high-temperature wear behavior of HVOF-sprayed high-entropy alloy coatings
35. Effect of Mo content on the microstructure and properties of Al0.5Fe2CrMnNiMox high entropy alloy
36. Microstructure, high temperature wear resistance and corrosion behaviour of NiCrCoNbMox high-entropy alloy coatings on 15CrMoG alloy by laser cladding
37. Wear mechanism transitions in FeCoNi and CrCoNi medium-entropy alloys from room temperature to 1000 ° C10.1016/j.jmst.2025.01.015 ↗
38. Spinel oxide enables high-temperature self-lubrication in superalloys
39. A.R. Moss, D.T. Richards, The arc-melting of niobium, tantalum, molybdenum and tungsten * , 2 (1960) 405–425. https://doi.org/https://doi.org/10.1016/0022-5088(60)90024-2.10.1016/0022-5088(60)90024-2 ↗
40. Nanoindentation studies of the mechanical properties of the μ phase in a creep deformed Re containing nickel-based superalloy10.1016/j.msea.2015.03.045 ↗
41. High uniformity of the mechanical properties of arc-melted WNbMoTaZr refractory high entropy alloy10.1016/j.intermet.2024.108213 ↗
42. Laser Raman spectroscopy: a technique for rapid characterisation of oxide scale layers10.1179/mst.1998.14.5.373 ↗
43. Solid solutions of Ni and Co molybdates in silica-dispersed and bulk catalysts prepared by sol-gel and citrate methods10.1016/j.jssc.2004.03.022 ↗
44. Deactivation behavior of an iron-molybdate catalyst during selective oxidation of methanol to formaldehyde10.1039/C8CY01109E ↗
45. Simple synthesis of free surface nanostructured spinel NiFe2O4 with a tunable particle size10.1016/j.jallcom.2017.06.200 ↗
46. Raman study of NiFe2O4 nanoparticles, bulk and films: Effect of laser power10.1002/jrs.2791 ↗
47. Cation distribution and particle size effect on Raman spectrum of CoFe 2O410.1016/j.jssc.2010.10.019 ↗
48. Highly selective catalytic reduction of NO via SO2/H2O-tolerant spinel catalysts at low temperature10.1007/s11356-016-7061-y ↗
49. Micro-Raman study of the m-MoO2 to α-MoO3 transformation induced by cw-laser irradiation10.1016/j.optmat.2010.10.028 ↗
50. H.S.C. O’neill, An in situ Raman spectroscopic study of pressure induced dissociation of spinel NiCr2O4
51. High-temperature thermal and X-ray diffraction studies, and room-temperature spectroscopic investigation of some inorganic pigments10.1016/j.dyepig.2011.05.018 ↗
52. Enhanced wear resistance of cobalt oxide over nickel oxide10.1007/s11249-023-01769-6 ↗
53. Bhushan · 2013
54. Wear of Metals10.1007/BF03397325 ↗
55. Enhanced mechanical properties and in vitro biocompatibility of TiMOVWCr high-entropy alloy synthesized by magnetron sputtering10.1016/j.apsusc.2023.158222 ↗
56. Atomic radius mismatch: a key parameter for design and synthesis of high-entropy physical vapor deposition coatings—review10.1002/adem.202301934 ↗
57. Thermodynamics of formation of simple spinels10.1016/0022-1902(68)80475-0 ↗
58. First-principles analysis of cation diffusion in mixed metal ferrite spinels10.1021/acs.chemmater.5b03911 ↗
59. The evolution mechanism of tribo-oxide layer during high temperature dry sliding wear for nickel-based superalloy10.1016/j.wear.2021.203747 ↗
60. Oxidation of Iron-Molybdenum and Nickel-Molybdenum Alloys10.1149/1.2429990 ↗
61. Kinetics of Fe-30%Ni-12.5%Co Invar Alloy during High Temperature Oxidation10.1007/BF03186109 ↗
62. Composite and constituent materials review IJCCM *author for correspondence structural, optical, and antibacterial properties of NiCr₂O₄/NiO nanocomposite synthesized by a facile microplasma electrochemical process
63. Bottom-up characterization of electrochemical passivity from simple binary alloys to high entropy alloys10.1016/j.electacta.2021.139804 ↗
64. The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures10.1016/j.wear.2019.03.002 ↗
65. A promising new high temperature self-lubricating material: CoCrFeNiS0.5 high entropy alloy10.1016/j.msea.2018.06.030 ↗
66. T.D. Vo, B. Tran, A.K. Tieu, D. Wexler, G. Deng, C. Nguyen, Effects of oxidation on friction and wear properties of eutectic high-entropy alloy AlCoCrFeNi2.1, 160 (2021) 107017. https://doi.org/10.1016/j.triboint.2021.107017.10.1016/j.triboint.2021.107017 ↗
67. High temperature tribological performance of a cost-effective eutectic high entropy alloy Al0.8CrFeNi2.2: Comparison with AlCoCrFeNi2.110.1016/j.triboint.2023.108445 ↗
68. High-temperature tribological behavior of CoCrFeNiV high-entropy alloys: A parallel comparison with CoCrFeNiMn high-entropy alloys10.1016/j.triboint.2022.107736 ↗
69. Investigation of mechanical properties and high temperature wear resistance of CoFeNi1.5VZr0.4Six high entropy alloys optimized by Si alloying10.1016/j.triboint.2024.110165 ↗
70. Investigation of high temperature tribological performance of TiZrV0.5Nb0.5 refractory high-entropy alloy optimized by Si microalloying10.1016/j.triboint.2022.107885 ↗
71. Microstructure and Wide Temperature Range Tribological Properties of CoCrFeNiTi High-Entropy Alloy Coating by Laser Cladding
72. Study of wear and friction properties of a Co-free CrFeNiAl0.4Ti0.2 high entropy alloy from 600 to 950 °C10.1016/j.triboint.2022.107453 ↗
73. The effect of oxide-forming alloying elements on the high temperature wear of a hot work steel10.1016/j.wear.2004.04.014 ↗
74. Microstructure and high temperature tribological behavior of nickel-based superalloy with addition of revert10.1016/j.jmrt.2024.09.207 ↗
75. Tribological performance of a TiZrNbMo0.6 refractory high entropy alloy at elevated temperatures10.1016/j.jallcom.2022.165915 ↗
76. Microstructure and tribological properties of TiZrV0.5Nb0.5Alx refractory high entropy alloys at elevated temperature
77. Deformation and tribological behavior of ductile refractory high-entropy alloys
78. High temperature tribology of CuMoTaWV high entropy alloy10.1016/j.wear.2018.12.085 ↗
79. Development of a Ti30Hf20Nb20Ta10V10Mo7W3 refractory high entropy alloy with excellent mechanical properties and wear resistance10.1016/j.jallcom.2023.171571 ↗
80. Dry sliding and tribocorrosion behaviour of hot pressed CoCrMo biomedical alloy as compared with the cast CoCrMo and Ti6Al4V alloys10.1016/j.matdes.2013.05.032 ↗
81. A novel wear-resistant Ni-based superalloy via high Cr-induced subsurface nanotwins and heterogeneous composite glaze layer at elevated temperatures10.1016/j.triboint.2023.108383 ↗
82. Elevated-temperature tribology of metallic materials10.1016/j.triboint.2010.01.003 ↗
83. High-temperature oxidation properties of economical and lightweight Fe-Cr-Ni-Al medium-entropy alloy10.1016/j.corsci.2023.111231 ↗
84. On the surface property–oxidation relationship in refractory high-entropy alloys10.1002/adem.202400960 ↗
85. Birks · 2006
86. Ab initio-based metric for predicting the protectiveness of surface films in aqueous media10.1038/s41529-023-00385-y ↗
87. Effect of Mo on the high-temperature oxidation behavior of Cr-Ni-Mo hot-work die steels10.1016/j.corsci.2023.111487 ↗
88. The mechanism of high temperature aqueous corrosion of stainless steel10.1016/0010-938X(91)90125-9 ↗