Cold gas dynamic additive spraying of functionally graded Cu matrix composites reinforced by high entropy oxides
Source abstract
Abstract
Cold gas dynamic spraying was attempted as a new technique to additively fabricate functionally graded Cu-matrix composites reinforced by BaFe 12O 19 and its corresponding BaFe 6(AlCrTiGaCo) 6O 19, BaFe 2(AlCrTiGaCo) 10O 19 and BaFe 6(AlCrSnGaCo) 6O 19 high entropy oxides (HEOs) particles. The BaFe 12O 19 and HEOs reinforcement particles, prepared by solid-phase sintering and ball milling, exhibited a single BaFe 12O 19-type structure and homogenous microstructure. Cu-matrix composites with a gradient lamellar microstructure were successfully deposited, in which the coarse Cu layers formed at the bottom of the samples gradually transformed to a more refined microstructure along the deposition direction. The reinforcement particles were incorporated between and within the Cu lamellas. The samples exhibited a gradient microhardness pattern that increased from bottom to the surface of the samples along the deposition direction. Cu-20 % BaFe 6(AlCrSnGaCo) 6O 19 composite exhibited the highest microhardness value of 195 HV at its top surface which decreased to about 142 HV at its bottom. Second phase strengthening is considered as the main strengthening mechanism. The as-sprayed Cu alloy exhibited an electrical conductivity of 86 %IACS, and this value was about 68.7, 78.8, 64.3 and 69.3 %IACS for the composites samples reinforced by 20 wt% BaFe 12O 19, BaFe 6(AlCrSnGaCo) 6O 19, BaFe 6(AlCrTiGaCo) 6O 19, and BaFe 2(AlCrTiGaCo) 10O 19 respectively. Finally, cold gas dynamic spraying is introduced as an effective additive manufacturing method to fabricate free-standing functionally graded Cu-matrix composites reinforced by different oxide particles.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Enhancing mechanical properties of copper matrix composite by adding SiO2 quantum dots reinforcement10.1016/j.vacuum.2021.110682 ↗
2. An axially continuous graphene–copper wire for high-power transmission: thermoelectrical characterization and mechanisms10.1002/adma.202104208 ↗
3. Progress in research on nanoprecipitates in high-strength conductive copper alloys: a review10.1631/jzus.A2200398 ↗
4. Preparation process and mechanical properties of laser cladding gradient molybdenum coating on copper alloy10.1016/j.surfcoat.2023.129888 ↗
5. Paradigm of state-of-the-art CNT reinforced copper metal matrix composites: processing, characterizations, and applications10.1016/j.jmrt.2023.05.083 ↗
6. Improving the strength-ductility synergy of carbon nanotubes reinforced Cu matrix composites through interfacial regulation10.1016/j.compositesa.2023.107787 ↗
7. Tailoring the strengthening mechanisms of high-entropy alloys toward excellent strength-ductility synergy by metalloid silicon alloying: A review10.1016/j.pmatsci.2024.101295 ↗
8. Synthesis and characterization of nanocrystalline high entropy heusler intermetallics powders10.1007/s12540-023-01573-w ↗
9. Effect of intermetallic compounds on the high-temperature oxidation resistance of Al0. 25CoCrFeNiCuAux (x= 0, 0.1, 0.3) high-entropy alloys
10. High-entropy La (FeCuMnMgTi) O3 nanoparticles as heterogeneous catalyst for CO2 electroreduction reaction10.1021/acs.jpclett.4c01240 ↗
11. CoFeMnCuNiCr) 3O4 high-entropy oxide nanoparticles immobilized on reduced graphene oxide as heterogeneous catalysts for solvent-free aerobic oxidation of benzyl alcohol10.1021/acsanm.4c00103 ↗
12. Carbon vacancies enhanced oxidation resistance of high-entropy carbides (Ti0. 2V0. 2Nb0. 2Mo0. 2W0. 2) Cx10.1016/j.ceramint.2023.12.311 ↗
13. Embracing entropy in glass-ceramics10.1016/j.ceramint.2024.05.213 ↗
14. Effect of FeCoNiMnCr high-entropy alloy reinforcement on mechanical, wear, and thermal expansion behavior of copper matrix composites10.1007/s11837-023-06066-0 ↗
15. Fabrication and mechanical properties of AlCoNiCrFe high-entropy alloy particle reinforced Cu matrix composites10.1016/j.jallcom.2015.07.125 ↗
16. Realizing the combination of high strength and good ductility of Cu matrix composites with CrCoNi reinforcement particles and microlaminated structure10.1016/j.jallcom.2021.159632 ↗
17. Novel strength-electrical conductivity synergy in Cu-based composites reinforced with TiZrNbTa high entropy alloy10.1016/j.msea.2023.145210 ↗
18. AlCoCrFeNi high entropy alloy reinforced Cu-based composite with high strength and ductility after hot extrusion10.1016/j.vacuum.2020.109882 ↗
19. Effect of microstructure on mechanical properties of FeCoNiCrAl high entropy alloys particle reinforced Cu matrix surface composite prepared by FSP10.1016/j.jmrt.2023.10.123 ↗
20. Investigating the tribological characteristics of copper surface composites reinforced with high entropy alloy (AlCoCrCuFe) through friction stir processing10.1038/s41598-023-49557-5 ↗
21. Tuning the mechanical properties of CrCoFeMnNi high entropy alloy via cold spray additive manufacturing associated with heat treatment10.1016/j.msea.2024.146214 ↗
22. Cold spray additive manufacturing of CoCrFeNiMn high-entropy alloy: process development, microstructure, and mechanical properties10.1007/s11666-022-01374-4 ↗
23. Preparation, phase stability, and magnetization behavior of high entropy hexaferrites10.1016/j.isci.2023.107077 ↗
24. Cold spray deposition characteristic and bonding of CrMnCoFeNi high entropy alloy10.1016/j.surfcoat.2021.127748 ↗
25. Microstructure and properties of FeCoNiCrAl high-entropy alloy particle-reinforced Cu-matrix composites prepared via FSP10.1016/j.jallcom.2023.168906 ↗
26. An investigation of the effect of SiC particle size on Cu–SiC composites10.1016/j.compositesb.2012.01.006 ↗