journal article·2024-12

Laser melting deposited a laminated H13/17–4PH heterostructure alloy to achieve strength-ductility synergy and outstanding high-temperature wear resistance

Hangtao Gao, Jiawang Wu, Yaxiong Guo, Fangping Wang, Tianhai Liao, Jing Zhang, Qibin Liu

Publisher page

Abstract

To inhibit the cracking behavior induced by the poor ductility of LMD-ed H13 steel, we have adopted a soft/hard laminated composite strategy to achieve a 17–4PH/H13 heterostructure alloy. Also, the effect of its hard-soft interfacial characteristics on tensile properties and high/room-temperature wear resistance has been studied. The research results show that this laminated alloy mainly comprises two alternately stacked martensite layers with a layer width of 350 µm, including lath martensite (H13) and lath martensite (17–4PH). The lath-like martensite layer possesses a high average microhardness value of over 500 HV, far higher than that of LMD-ed 17–4PH steel. Besides, the laminated alloy shows a high σ b (∼1721.59 MPa) with a sufficient δ (∼5.21 %), far higher than that of LMD-ed H13 steel (i.e., σ b ∼1701.41 MPa and δ ∼ 1.27 %), which the fracture mode is mixed by ductile and cleavage fracture. The H13/17–4PH laminated alloy has excellent wear resistance at RT comparable to the LMD-ed H13 steel. Interestingly, the H13/17–4PH laminated alloy maintains low friction coefficients and wear rates at 600 ℃. Specifically, its high-temperature wear rate (22.28×10 −6 mm 3 N −1·m −1) is one-eighth as low as that of LMD-ed H13 steel (157.17×10 −6 mm 3 N −1·m −1). The above results provide a reference for re-manufacturing die steels in industrial applications of high-temperature wear resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Microstructural effects on the tensile and fracture behavior of selective laser melted H13 tool steel under varying conditions10.1016/j.matchar.2019.109817 ↗
2. Characterization on microstructure and carbides in an austenitic hot-work die steel during ESR solidification process10.2355/isijinternational.ISIJINT-2018-370 ↗
3. Thermal fatigue life and improvement mechanism of Fe-based coatings on H13 extrusion die by laser additive remanufacturing10.1016/j.surfcoat.2020.126808 ↗
4. Application of atom probe tomography to complex microstructures of laser additively manufactured samples10.1017/S1431927619013308 ↗
5. Laser additively manufactured crack-free aluminum-bearing high entropy alloys: alloy design, synthesis, cracking inhibition and microstructure evolution effects on their tensile properties10.1080/17452759.2023.2250771 ↗
6. Tempering behavior of a direct laser deposited hot work tool steel: influence of quenching on secondary hardening and microstructure
7. Y.W. Kim, H. Park, Y.S. Eom, D.G. Ahn, K.T. Kim, J.-h Yu, Y.S. Choi, J.M. Park, High-speed manufacturing-driven strength-ductility improvement of H13 tool steel fabricated by selective laser melting, Powder Metallurgy, 1-11.
8. Thermal and mechanical properties of selective laser melted and heat treated H13 hot work tool steel
9. High strength (∼2000 MPa) or highly ductile (∼11%) additively manufactured H13 by tempering at different conditions10.1016/j.msea.2019.138845 ↗
10. Interfacial characterization and reaction mechanism of Ti/Al multi-material structure during laser powder bed fusion process10.1016/j.matchar.2022.112195 ↗
11. A hard/soft layered micro-structured CuCrZr alloy with strength, ductility and electrical conductivity synergy10.1016/j.matchar.2023.112836 ↗
12. Dissimilar welding and joining of cemented carbides10.3390/met9111161 ↗
13. Ordered mesoporous Pt/Fe3O4–CeO2 heterostructure gel particles with enhanced catalytic performance for the reduction of 4-nitrophenol
14. A novel high-entropy alloy with desirable strength and ductility designed by multi-component substitution for traditional austenitic alloys10.1016/j.jallcom.2022.168266 ↗
15. Microstructure and properties of TC4/TNTZO multi-layered composite by direct laser deposition10.1016/j.jmbbm.2020.103842 ↗
16. Laser aided additive manufacturing of spatially heterostructured steels10.1016/j.ijmachtools.2021.103817 ↗
17. Influence of heat treatment on the microstructure and hardness of 17-4PH stainless steel fabricated through direct energy deposition10.1007/s12540-022-01333-2 ↗
18. Excellent tension properties of stainless steel with a 316L/17-4PH/17-4PH laminated structure fabricated through laser additive manufacturing10.1016/j.msea.2021.142461 ↗
19. Homogenization timing effect on microstructure and precipitation strengthening of 17–4PH stainless steel fabricated by laser powder bed fusion
20. Plasma debinding and sintering of metal injection moulded 17-4PH stainless steel10.1590/S1516-14392011005000082 ↗
21. Microstructure and mechanical properties of high-efficiency laser-directed energy deposited 15-5PH stainless steel10.1016/j.matchar.2022.112080 ↗
22. Influence of microstructure and strain rate on adiabatic shearing behavior in Ti–6Al–4V alloys10.1016/j.msea.2008.09.076 ↗
23. High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components10.1016/j.ijmachtools.2019.103475 ↗
24. Delaying premature local necking of high-strength Cu: a potential way to enhance plasticity10.1016/j.scriptamat.2010.08.049 ↗
25. Deformation behavior and plastic instabilities of ultrafine-grained titanium10.1063/1.1384000 ↗
26. Additive manufacturing of multi-scale heterostructured high-strength steels10.1080/21663831.2021.1904299 ↗
27. Effect of laser speed on microstructure and mechanical properties of AISI H13 tool steel prepared by laser powder bed fusion process10.1007/s11665-021-06321-y ↗
28. Influence of post treatment on microstructure, porosity and mechanical properties of additive manufactured H13 tool steel10.1016/j.msea.2018.08.046 ↗
29. Effects of rare earth elements on microstructure and mechanical properties of H13 die steel10.3390/met10070918 ↗
30. Extended continuous cooling transformation (CCT) diagrams determination for additive manufacturing deposited steels10.3390/ma15093076 ↗
31. Microstructural characterization and mechanical performance of hot work tool steel processed by selective laser melting10.1007/s11663-014-0267-9 ↗
32. Microstructure and mechanical properties of H13 tool steel fabricated by high power laser powder bed fusion10.1016/j.msea.2022.144154 ↗
33. Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting10.1007/s00170-017-0426-7 ↗
34. Mechanical properties and cross-sectional behavior of additively manufactured high strength steel tubular sections10.1016/j.tws.2019.04.050 ↗
35. The effect of heat treatment on microstructure and properties of laser-deposited TiC reinforced H13 steel matrix composites10.1016/j.ijleo.2020.164286 ↗
36. Effect of V on microstructure, wear and corrosion properties in AlCoCrMoV high entropy alloy coatings by laser cladding10.1016/j.jmrt.2023.02.098 ↗
37. High-temperature tribological behavior of tungsten10.1016/j.ijrmhm.2019.104992 ↗
38. Comparison of mechanical behaviors of several bulk metallic glasses for biomedical application10.1016/j.jnoncrysol.2014.09.021 ↗
39. Dry and lubricated tribological behavior of a Ni- and Cu-free Zr-based bulk metallic glass10.1016/j.jnoncrysol.2015.06.026 ↗
40. Electrodeposited metallic glasses with superlative wear resistance10.1016/j.msea.2021.141315 ↗
41. Nanocrystalline TiC-reinforced H13 steel matrix nanocomposites fabricated by selective laser melting10.1016/j.matdes.2016.02.022 ↗
42. Selective laser melting of TiB 2 /H13 steel nanocomposites: influence of hot isostatic pressing post-treatment10.1016/j.jmatprotec.2017.01.019 ↗
43. Tribological behavior of laser thermal sprayed Cr3C2–NiCr + 10%Ni/MoS2 composite coating on H13 hot work mould steel10.1088/2053-1591/ab5ec6 ↗
44. Surface engineering analysis of plasma-nitrided die steels10.1177/1350650119873237 ↗
45. Laser shock wave-induced wear property improvement and formation mechanism of laser cladding Ni25 coating on H13 tool steel10.1016/j.jmatprotec.2021.117202 ↗
46. Friction and reciprocating wear behavior of borided AISI H13 steel under dry and lubricated conditions10.1007/s11665-020-04957-w ↗
47. Study on wear behaviour of 4Cr4Mo2NiMnSiV die steel at high temperature10.1088/1757-899X/605/1/012016 ↗
48. Mechanical and thermal properties of the high thermal conductivity steel (HTCS) additively manufactured via powder-fed direct energy deposition10.3390/mi14040872 ↗
49. Y. Song, X. Kong, P. Yang, H. Fu, X. Wang, Morphology and Performance of 5Cr5MoV Casting Die Steel in the Process of Surfacing, IOP Conference Series: Earth and Environmental Science, 100 (2017).10.1088/1755-1315/100/1/012150 ↗
50. Elevated temperature sliding wear behavior of WCP-reinforced ferrous matrix composites10.1007/s10853-008-3027-x ↗
51. Achieving high hardness and wear resistance in phase transition reinforced DC53 die steel by laser additive manufacturing10.1016/j.surfcoat.2023.129474 ↗
52. Wear behavior and mechanism of a Cr-Mo-V cast hot-working die steel10.1007/s11661-010-0546-2 ↗
53. Effects of temperature on wear properties and mechanisms of HVOF sprayed CoCrAlYTa-10%Al2O3 coatings and H13 steel10.3390/met9111224 ↗
54. Enhanced hardness and wear property of S136 mould steel with nano-TiB2 composites fabricated by selective laser melting method10.1016/j.apsusc.2018.06.220 ↗
55. Investigation of the surface properties and wear properties of AISI H11 steel treated by auxiliary heating plasma nitriding10.3390/coatings10060528 ↗
56. Tribological behaviour of CrAlN coatings at 600°C10.1179/1743294412Y.0000000100 ↗
57. Relations of counterface hardness with wear behavior and tribo-oxide layer of AISI H13 steel10.1007/s11661-016-3689-y ↗
58. Investigation on elevated-temperature wear performance and wear failure mechanism of a tungsten-system hot-working die steel
59. Effect of sliding speed on elevated-temperature wear behavior of AISI H13 steel10.1007/s42243-021-00644-9 ↗
60. Cu assisted improvement of wear and corrosion resistance in FeCoNiAl high-entropy intermetallic coating by laser cladding10.1016/j.jmrt.2023.01.003 ↗
61. Microstructure evolution, wear behavior, and corrosion performance of alloy steel gradient material fabricated by direct laser deposition10.1016/j.jmrt.2020.08.074 ↗
62. Role of fracture toughness in impact-abrasion wear10.1016/j.wear.2019.03.028 ↗
63. Tribological and cavitation erosion behaviors of nickel-based and iron-based coatings deposited on AISI 304 stainless steel by cold metal transfer10.1016/j.jmrt.2020.04.064 ↗
64. Oxide-scale structures formed on commercial hot-rolled steel strip and their formation mechanisms10.1023/A:1010395419981 ↗
65. Kinetics of phase separation, border of miscibility gap in Fe–Cr and limit of Cr solubility in iron at 832 K10.1016/j.matchar.2019.109937 ↗