Oxides improve the strength of Zn-0.5Mn-0.5Mg alloys proceeded by laser powder bed fusion

Laser powder bed fusion has recently been adopted to fabricate biodegradable Zn alloys. But the mechanical properties need to be further improved to meet the requirements for natural bone implants. In this study, a ternary Zn-0.5Mn-0.5Mg biodegradable alloy is prepared by laser powder bed fusion technique. The as-printed sample shows a large compressive yield strength of 267 MPa and considerable ductility that the sample maintains its integrity after 50 % compression. The improved strength is mainly attributed to the formation of brittle Zn oxides, Mn oxides and Mg oxides which induce lattice distortion. These oxides fragment easily during the compression and reduce the stress concentration, resulting in significant ductility. More importantly, the as-printed sample shows a moderate degradation rate of 0.08 mm/year after immersing in the simulated body fluid solution for 7 days. In addition, the sample has MC3T3-E1 cell viabilities higher than 75 %, showing no-toxicity characteristic. This study demonstrates that laser powder bed fusion Zn-Mn-Mg alloy is a promising candidate for biodegradable materials and proposes a novel route to tailor the mechanical properties of additive-manufactured Zn alloys by oxides compositing.