journal article·2024-11

Modulation-ratio-dependent deformation mechanisms in Cr/CrN/Cr-DLC multilayer triggered by nanoindentation

Lijun Wang, Ying Wu, Hui Chen, Yan Liu, Yunfei Meng, Zhenlin Zhang

Publisher page

Abstract

Attributed to the incorporation of Cr/CrN multilayer as an interlayer and the doping of Cr into DLC, Cr/CrN/Cr-DLC multilayer exhibited better strength-ductility synergy. However, the deformation mechanisms of Cr/CrN/Cr-DLC multilayer, including microstructure changes in Cr-DLC amorphous layer and multilayer Cr/CrN at atomic scale, remain in suspense. Here, Cr/CrN/Cr-DLC multilayers with different bilayer ratios (BRs) were synthesized by the multi-arc ion plating technique. Nanoindentation-induced deformation behaviors of Cr/CrN/Cr-DLC film were elucidated by multiscale experimental investigations. This study is of great significance for finding the existence of high-density SFs and deformation twins in CrN ceramic layer with high SFE under the nanoindentation process (high strain rate). Cr/CrN/Cr-DLC multilayer with BR of 1:9 (R1:9) exhibited the best combination of hardness (34.1 GPa) and ductility, due to a nearly coherent interface with sparse misfit dislocations and high density of SFs in CrN layer. While the multilayer with BR of 9:1 (R9:1) presented a semi-coherent interface. In the nanoindentation process, the strength-ductility enhancement mechanisms of R1:9 included coherency stress, SFs, deformation twins and Lomer-Cottrell locks in CrN. While deformation mechanisms of R9:1 were related to dislocations pile-ups at the interface, SFs and deformation twins in CrN, a large area of amorphization in Cr. All in all, our study provides a comprehensive examination of the plastic deformation mechanisms of the Cr/CrN/Cr-DLC multilayer, which had not been previously considered. Our work might contribute to the fundamental understanding of the deformation mechanisms of Cr-doped DLC and the correlation between deformation behavior and interfacial characteristics of the Cr/CrN multilayer.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Robertson · Mater. Sci. Eng. R Rep. · 2002 · 37 · 12910.1016/S0927-796X(02)00005-0 ↗
2. Nanoindentation data analysis of loading curve performed on DLC thin films: effect of residual stress on the elasto-plastic properties10.1063/1.5009756 ↗
3. The preparation and evaluation of graded multilayer ta-C films deposited by FCVA method10.1016/j.apsusc.2011.01.022 ↗
4. A study of structure and properties of Ti-doped DLC film by reactive magnetron sputtering with ion implantation10.1016/j.apsusc.2011.11.034 ↗
5. Mechanical and tribological properties of Ti-DLC films with different Ti content by magnetron sputtering technique10.1016/j.apsusc.2012.01.072 ↗
6. Synthesis and electrochemical properties of Ti-doped DLC films by a hybrid PVD/PECVD process10.1016/j.apsusc.2017.10.151 ↗
7. Effects of Cr concentrations on the microstructure, hardness, and temperature-dependent tribological properties of Cr-DLC coatings10.1016/j.apsusc.2013.09.036 ↗
8. Tribomechanical properties of hard Cr-doped DLC coatings deposited by low-frequency HiPIMS10.1016/j.surfcoat.2019.124899 ↗
9. Tribological response and characterization of Mo–W doped DLC coating10.1016/j.wear.2016.11.036 ↗
10. High temperature tribological behavior of W containing diamond-like carbon (DLC) coating against titanium alloys10.1016/j.surfcoat.2013.10.075 ↗
11. Influence of Ti–TiN multilayer PVD-coatings design on residual stresses and adhesion10.1016/j.matdes.2015.03.007 ↗
12. Damage evolution behavior of TiN/Ti multilayer coatings under high-speed impact conditions10.1016/j.surfcoat.2021.127807 ↗
13. Failure and deformation mechanisms during indentation in nanostructured Cr/CrN multilayer coatings10.1016/j.surfcoat.2013.12.006 ↗
14. X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN–Cr thin film10.1016/j.actamat.2014.11.011 ↗
15. Indentation fracture toughness and acoustic energy release in tetrahedral amorphous carbon diamond-like thin flms10.1016/j.actamat.2006.05.003 ↗
16. Nanoindentation-induced deformation behaviors of tetrahedral amorphous carbon film deposited by cathodic vacuum arc with different substrate bias voltages10.1016/j.apsusc.2021.151741 ↗
17. Interface-dominated deformation mechanisms in Cr/CrN/Cr-DLC multilayer triggered by nanoindentation10.1016/j.msea.2023.145745 ↗
18. Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer10.1016/j.matdes.2020.109023 ↗
19. An overview of interface-dominated deformation mechanisms in metallic multilayers10.1016/j.cossms.2010.09.002 ↗
20. Comparison of size dependent strengthening mechanisms in Ag/Fe and Ag/Ni multilayers10.1016/j.actamat.2016.05.030 ↗
21. Formation of Si-rich interfaces by radiation-induced diffusion and microsegregation in CrN/ZrN nanolayer coating10.1021/acsami.0c19451 ↗
22. Antibacterial effect of Au implantation in ductile nanocomposite multilayer (TiAlSiY)N/CrN coatings10.1021/acsami.9b16328 ↗
23. Nanoscale architecture of (CrN/ZrN)/(Cr/Zr) nanocomposite coatings: microstructure, composition, mechanical properties and first-principles calculations10.1016/j.jallcom.2020.154808 ↗
24. High density of stacking faults strengthened TaN/TiN multilayer10.1016/j.actamat.2023.119027 ↗
25. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
26. The origin of stresses in magnetron-sputtered thin films with zone T structures10.1016/j.actamat.2009.12.048 ↗
27. The influence of stacking faults on mechanical behavior of advanced materials10.1016/j.msea.2020.140696 ↗
28. Formation of high-density stacking faults in ceramic films induced by Ti transition layer10.1016/j.scriptamat.2021.114496 ↗
29. Toughness measurement of thin films: a critical review10.1016/j.surfcoat.2004.10.021 ↗
30. Atomic-scale origin of shear band multiplication in heterogeneous metallic glasses10.1016/j.scriptamat.2019.11.006 ↗
31. Elastic properties and stacking fault energies of borides, carbides and nitrides from first-principles calculations10.1007/s40195-019-00873-8 ↗
32. Thermal-induced decomposition and mechanical properties of AlN/CrN superlattice coating10.1016/j.jallcom.2023.170961 ↗
33. Influence of AlN layers on mechanical properties and thermal stability of Cr-based nitride coatings10.1016/j.tsf.2012.12.057 ↗
34. Impact of metal/ceramic interactions on interfacial shear strength: study of Cr/TiN using a new modified embedded-atom potential10.1016/j.matdes.2021.110120 ↗
35. Sliding of coherent twin boundaries10.1038/s41467-017-01234-8 ↗
36. Amorphization in extreme deformation of the CrMnFeCoNi high-entropy alloy10.1126/sciadv.abb3108 ↗
37. Ultra-high strength and plasticity mediated by partial dislocations and defect networks: part I: texture effect10.1016/j.actamat.2019.11.049 ↗
38. Amorphization by mechanical deformation
39. Amorphization-mediated plasticity10.1038/s41563-023-01638-6 ↗