journal article·2024-11

Regulating the electrochemical performance of simple halogen-free electrolyte using ammonium bromide additive for magnesium-sulfur battery applications

Mohamed Farrag, Taha.A. Hanafy, N. Yacout, Mostafa.A. Moselhy, Engy El-Dek, Abdel Monem Mostafa, H.S. Refai, Wei Xing, E. Sheha

Publisher page

Abstract

Magnesium-sulfur (Mg-S) batteries are a promising energy storage system; however, the short cycle life, low coulombic efficiency, and the shuttle effect of polysulfide hinder its practical application. Applying electrolyte additives is a powerful technique to optimize the electrochemical performance of Mg-S electrolytes. Herein, ammonium bromide (NH4Br) is used as an inorganic electrolyte additive in the halogen-free electrolyte (HFE) to guide homogeneous Mg deposition. It can be noticed that the addition of NH4Br decreases the activation energy values from 0.14 eV to 0.10 eV and reduces the value of Mg2+ stripping/plating overpotential. It is found that the introduction of NH4Br to HFE enhances the cycle life and the initial discharge capacity (~1662 mAhg-1) of the Mg-S cells compared with the cells using free NH4Br that deliver initial discharge capacity of ~ 184 mAh g-1, low coulombic efficiency, and short cycle life. Further efforts have been devoted by implementing a BaTiO3 (BTO) as a modified separator to overcome the polysulfide dissolution issue in the cell. The surface of the cell's anode applying a modified separator shows half wt.% S content compared with the bare cell after cycling. This study opens further research for developing novel electrolyte schemes for magnesium-sulfur battery applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Thermal Expansion and Ionic Conductivity · Layered Double Hydroxides Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Performance enhancement of rechargeable magnesium–sulfur batteries based on a sulfurized poly(acrylonitrile) composite and a lithium salt10.1016/j.jpowsour.2021.230604 ↗
2. Sun Y., Wang Y., Jiang L., Dong D., Wang W., Fan J., et al. Non-nucleophilic electrolyte with non-fluorinated hybrid solvents for long-life magnesium metal batteries. Energy & Environmental Science 2023.10.1039/D2EE03235J ↗
3. Toward highly reversible magnesium–sulfur batteries with efficient and practical Mg [B (hfip) 4] 2 electrolyte10.1021/acsenergylett.8b01061 ↗
4. Stripping and plating a magnesium metal anode in bromide-based non-nucleophilic electrolytes10.1002/cssc.202000249 ↗
5. An efficient bulky Mg [B (Otfe) 4] 2 electrolyte and its derivatively general design strategy for rechargeable magnesium batteries10.1021/acsenergylett.1c01411 ↗
6. A high potential polyanion cathode material for rechargeable Mg-ion batteries
7. Application of a sulfur cathode in nucleophilic electrolytes for magnesium/sulfur batteries10.1149/2.1131712jes ↗
8. A simple Cl–-free electrolyte based on magnesium nitrate for magnesium–sulfur battery applications10.1021/acsaem.1c03778 ↗
9. Highly stable plating/stripping behavior of zinc metal anodes in aqueous zinc batteries regulated by quaternary ammonium cationic salts10.1002/celc.202001426 ↗
10. A passivation-free solid electrolyte interface regulated by magnesium bromide additive for highly reversible magnesium batteries10.1021/acs.nanolett.3c00033 ↗
11. Establishing a stable anode–electrolyte interface in Mg batteries by electrolyte additive10.1021/acsami.1c08476 ↗
12. Preparation and physical properties of (PVA)0.75(NH4Br)0.25(H2SO4)xM solid acid membrane10.1016/j.jnoncrysol.2010.09.005 ↗
13. Enhancing proton conductivity of sodium alginate doped with glycolic acid in bio-based polymer electrolytes system10.1007/s10965-020-02142-0 ↗
14. Proton conducting polymer electrolyte based on plasticized chitosan–PEO blend and application in electrochemical devices10.1016/j.optmat.2013.03.004 ↗
15. Minireview on metal–chalcogenide cathode materials with dual-Redox Centers for Magnesium-metal-anode-based batteries: recent progress and future directions10.1021/acs.energyfuels.3c03057 ↗
16. Halide-based materials and chemistry for rechargeable batteries10.1002/anie.201902842 ↗
17. Porphyrin organic framework microsphere modified separator to enhance the cycling performance of Mg-S batteries10.1016/j.matlet.2023.135628 ↗
18. A covalent organic framework protection layer for highly active and stable Mg metal anode toward magnesium–sulfur batteries10.1016/j.matlet.2023.134994 ↗
19. Addressing the Sluggish Kinetics of Sulfur Redox for High-Energy Mg–S Batteries10.1002/aenm.202302905 ↗
20. The electrocatalytic activity of BaTiO3 nanoparticles towards polysulfides enables high-performance lithium–sulfur batteries10.1016/j.jechem.2020.01.028 ↗
21. Significant study of BaTiO3 as a cathode for magnesium battery applications10.1016/j.matchemphys.2022.126770 ↗
22. A separator modified by barium titanate with macroscopic polarization electric field for high-performance lithium–sulfur batteries10.1039/D3NR00263B ↗
23. Significant study of BaTiO3 as a cathode for magnesium battery applications10.1016/j.matchemphys.2022.126770 ↗
24. Rational design of high concentration electrolytes and MXene-based sulfur host materials toward high-performance magnesium sulfur batteries10.1016/j.cej.2021.131031 ↗
25. Synthesis_conditions_influencing_formation_of_MAPb.pdf>.
26. Advanced Materials - 2017 - Sun - Chemically Addressable Perovskite Nanocrystals for Light-Emitting Applications.pdf>.
27. The solvation of acetonitrile10.1021/ja983878n ↗
28. Characterization of acetonitrile isotopologues as vibrational probes of electrolytes10.1021/acs.jpcb.1c09572 ↗
29. Non-nucleophilic electrolyte with non-fluorinated hybrid solvents for long-life magnesium metal batteries10.1039/D2EE03235J ↗
30. Measurements of structural and optical properties for (AgPO3) 1-x (Ag2SO4) x glasses10.1080/10667857.2020.1814060 ↗
31. Tauc J. Amorphous and liquid semiconductors: Springer Science & Business Media; 2012.
32. A facile method for Tauc exponent and corresponding electronic transitions determination in semiconductors directly from UV–Vis spectroscopy data10.1016/j.optmat.2022.112205 ↗
33. The role of adding NaF to the electrolyte in constructing a stable anode/electrolyte interphase for magnesium battery applications10.1007/s10008-022-05329-1 ↗
34. Succinonitrile as electrolyte-additive with modified separator and microwave-assisted synthesis of sulfur nanoparticles cathode for magnesium battery applications10.1016/j.est.2023.107954 ↗
35. Optical dispersion and the structure of solids10.1103/PhysRevLett.23.1156 ↗
36. The long-wavelength edge of photographic sensitivity and of the electronic absorption of solids10.1103/PhysRev.92.1324 ↗
37. Characterization of structural and optical properties of plasma polymerized diethanolamine thin films10.1002/adv.22079 ↗
38. Optical, electrical and thermal studies on (As2Se3) 3− x (As2Te3) x glasses10.1016/j.tsf.2007.03.039 ↗
39. Synthesis and optical properties of new alkylated pyridinium halides10.1016/j.ijleo.2017.03.116 ↗
40. Study of ionic conduction, dielectric relaxation, optical and electrochemical properties of AgPO3/graphene glasses for magnesium battery applications10.1016/j.jnoncrysol.2022.121480 ↗
41. Characterization of fluorophosphate optical glasses10.1016/0022-4596(91)90319-D ↗
42. Investigation on dispersion parameters of Molybdenum Oxide thin films via Wemple–DiDomenico (WDD) single oscillator model10.1007/s00339-020-03996-3 ↗
43. B2O3 as an effective sintering aid in enhancing the lithium-ion conductivity of LiTa2PO8 solid electrolyte10.1016/j.jpowsour.2023.233229 ↗
44. Measurement of transference numbers for lithium ion electrolytes via four different methods, a comparative study10.1016/j.electacta.2011.02.025 ↗
45. 2-methyl imidazole electrolyte additive enabling ultra-stable Zn anode10.1016/j.cej.2022.139465 ↗
46. Microstructure, optical and photocatalytic properties of MgO nanoparticles10.1016/j.rinp.2020.103013 ↗
47. Life aging effect as a conditioning process that regulates the performance of the halogen-free Mg electrolyte10.1021/acs.langmuir.3c02690 ↗
48. Analysis of 3.4 Ah lithium-sulfur pouch cells by electrochemical impedance spectroscopy10.1016/j.jechem.2022.05.026 ↗
49. Constructing efficient Mg (CF3SO3) 2 electrolyte via tailoring solvation and interface chemistry for high-performance rechargeable magnesium batteries
50. Dynamic template directed construction of three-dimensional porous bismuth aerogels for high-rate Na-ion storage10.1039/D2TA09710A ↗
51. Positron annihilation spectroscopy as a diagnostic tool for probing the first-cycle defect evolution in magnesium–sulfur battery electrodes
52. Vinila V., Isac J. Synthesis and structural studies of superconducting perovskite GdBa2Ca3Cu4O10. 5+ δ nanosystems. Design, Fabrication, and Characterization of Multifunctional Nanomaterials: Elsevier; 2022. p. 319-341.10.1016/B978-0-12-820558-7.00022-4 ↗