journal article·2024-09

Simultaneously improving mechanical properties and electrical conductivity of Al-1.9Mn alloys with different Mg and Si addition

Shiwei Xu, Bo Lin, Yun Jiang, Xiangxiang He, Zhixiong Fan, Huaqiang Xiao, Zhiqiang Fu

Publisher page

Abstract

A simultaneous achievement of high strength and toughness, as well as high conductivity in traditional Al-1.9Mn cast aluminum alloy used in the manufacture of water-cooled radiator shells has proven to be challenging. The addition of Mg and Si elements was implemented in the cast aluminum alloy for a modified treatment to solve the problem. The results showed that the inclusion of Si facilitated the transformation of the plate-like Mn-rich phase (Al 6Mn) in the initial Al-1.9Mn alloy into a Chinese-script phase (Al 15Mn 3Si 2 ) in the new Al-1.9Mn alloy. A higher Si content resulted in an increased volume fraction of Al 15Mn 3Si 2 and a decreased solid solution of Mn in the matrix. Furthermore, a high content of Mg (0.9 wt%) in the Si modified Al-1.9Mn alloy resulted in a notable property reduction, not only in its elongation, but also in its electrical conductivity. It can be attributed to the formation of Mg 2 Si and the increased solid solution of Mg in the matrix. Through the optimization of the Mg and Si contents, new Al-1.9Mn alloys with superior mechanical properties and excellent electrical conductivity were successfully developed. With the addition of 0.45 wt% magnesium and 0.75 wt% silicon, the new Al-1.9Mn alloy increased its tensile strength to 170 MPa and yield strength to 88 MPa while maintaining 10 % elongation. At the same time, its electrical conductivity increased by 10.7 % compared to the original Al-1.9Mn alloy. The addition of magnesium and silicon elements can achieve a simultaneous enhancement of both the strength and electrical conductivity of the Al-1.9Mn alloy. This holds the potential to meet the usage requirements for cast aluminum alloys used in water-cooled radiator shells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Effect of heterogeneously distributed pre-existing dispersoids on the recrystallization behavior of a cold-rolled Al–Mn–Fe–Si alloy10.1016/j.matchar.2015.02.015 ↗
2. Thermally stable and corrosion resistant nanolaminated Al-Mn alloy with low angle boundary structures10.1016/j.jallcom.2022.165016 ↗
3. Effects of microstructure, texture evolution and strengthening mechanisms on mechanical properties of 3003 aluminum alloy during cryogenic rolling10.1016/j.jallcom.2021.161135 ↗
4. Investigation on fluidity, anodizing and tensile properties of Al–Mn alloys for application in thin-wall cast components10.1088/2053-1591/ab1704 ↗
5. Effect of magnesium on dispersoid strengthening of Al—Mn—Mg—Si (3xxx) alloys10.1016/S1003-6326(16)64407-2 ↗
6. Recrystallization and precipitation in Al-Mn-Si-alloys10.1515/ijmr-1978-690309 ↗
7. Exploring crystal structures, stability and mechanical properties of Fe, Mn-containing intermetallics in Al-Si Alloy by experiments and first-principles calculations10.1016/j.jallcom.2021.160022 ↗
8. Evolution in microstructure and mechanical properties during back-annealing of AlMnFeSi alloy10.1016/S1003-6326(11)61401-5 ↗
9. Microstructure and mechanical properties of spray co-deposited Al-8.9wt% Si-3.2wt% Cu-0.9wt% Fe+(Al-3wt% Mn-4wt% Si)p composite10.1016/j.jallcom.2006.08.156 ↗
10. Grain size-dependent Mg/Si ratio effect on the microstructure and mechanical/electrical properties of Al-Mg-Si-Sc alloys10.1016/j.jmst.2019.03.011 ↗
11. The effect of alloying elements on the ductility of Al-Mg-Si alloys10.1016/j.msea.2017.03.078 ↗
12. Experimental investigation of thermal conductivity of aluminum alloy 3003 produced by equal channel angular rolling process
13. Electronic transport and Wiedemann-Franz law in 2D phosphorene
14. Berman · 1976
15. Prediction of electrical/thermal conductivity in as-cast Mg binary alloys10.1016/j.jmrt.2023.10.243 ↗
16. Comparison of experimental, calculated and observed values for electrical and thermal conductivity of aluminium alloys10.1023/A:1018680024876 ↗
17. Design and preparation of Al-Fe-Ce ternary aluminum alloys with high thermal conductivity
18. Elucidating thermal conductivity mechanism of Al-9Si based alloys with trace transition elements (Mn, Cr, V)10.1016/j.jallcom.2022.164446 ↗
19. Simultaneous increase of electrical conductivity and hardness of Al-1.5 wt% Mn alloy by addition of 1.5 wt% Cu and 0.5 wt%
20. Processing of an as-cast Al-7.5wt%Y eutectic alloy by rolling and annealing to improve the tradeoff between strength and electrical conductivity10.1016/j.msea.2023.145950 ↗
21. Comparative study on relationship between modification of Si phase and thermal conductivity of Al–7Si alloy modified by Sr/RE/B/Sb elements
22. The effect of alloying elements on thermal conductivity of aluminum alloys in high pressure die casting10.4028/www.scientific.net/AMR.813.175 ↗
23. The improvement of electrical conductivity of hypoeutectic Al-Si alloys achieved by composite melt treatment10.1016/j.jallcom.2019.02.242 ↗
24. Effect of ultrasonic melt processing and Al-Ti-B on the microstructural refinement of recycled Al alloys10.1016/j.ultsonch.2022.106139 ↗
25. PITRE: software for phase-sensitive X-ray image processing and tomography reconstruction10.1107/S0909049512029731 ↗
26. Synergistic effects of Mn and B on iron-rich intermetallic modification of recycled Al alloy10.1016/j.jmrt.2023.03.045 ↗
27. 3D Fe-rich phases evolution and its effects on the fracture behavior of Al–7.0 Si–1.2 Fe alloys by Mn neutralization10.1007/s40195-021-01299-x ↗
28. Revealing the nucleation and growth mechanisms of Fe-rich phases in Al–Cu–Fe (-Si) alloys under the influence of Al–Ti–B10.1016/j.intermet.2022.107584 ↗
29. Influence of cooling rate on the Fe intermetallic formation in an AA6063 Al alloy10.1016/j.jallcom.2012.12.077 ↗
30. Modelling microstructure evolution during casting, homogenization and ageing heat treatment of Al-Mg-Si-Cu-Fe-Mn alloys10.1016/j.calphad.2018.09.004 ↗
31. Callister · 2000
32. Transformation sequence of Mg-Si precipitates towards a precipitation of Mn and Cr containing phase governed by the high strain-rate collision during magnetic pulse welding of Al-Mg-Si alloy
33. Microstructure, elevated-temperature mechanical properties and creep resistance of dispersoid-strengthened Al-Mn-Mg 3xxx alloys with varying Mg and Si contents10.1016/j.msea.2017.10.013 ↗
34. A thermodynamic evaluation of the Al-Mn system10.1007/BF02646113 ↗
35. 3-D morphology and growth mechanism of primary Al6Mn intermetallic compound in directionally solidified Al-3at% Mn alloy10.1016/j.intermet.2011.12.015 ↗
36. Chapter one-alloying elements and dopants: phase diagrams
37. A.M.F. Muggerud, E.A. Mørtsell, Y.J. Li, R. Holmestad, Dispersoid strengthening in AA3xxx alloys with varying Mn and Si content during annealing at low temperatures, Mater. Sci. Eng. A. 567 (567) 21-28.10.1016/j.msea.2013.01.004 ↗
38. LCF behaviour of high strength aluminium alloys AA 6110A and AA 608610.1016/j.ijfatigue.2023.107971 ↗
39. Effect of melt holding on morphological evolution and sedimentation behavior of iron-rich intermetallic phases in Al-Si-Fe-Mn-Mg alloy10.1016/S1003-6326(19)65175-7 ↗
40. Evolution of iron-rich phases and their effect on the tensile fracture behavior of squeeze-cast Al-Cu alloys with high Fe contents
41. Soboyejo · 2002
42. Al alloys and casting processes for induction motor applications in battery-powered electric vehicles: a review10.3390/met12020216 ↗
43. Examination of precipitation in the aluminum alloy AA6111 using electrical resistivity measurements10.1016/j.msea.2006.01.042 ↗
44. Rossiter · 1991
45. Interaction between eutectic intermetallic particles and dispersoids in the 3003 aluminum alloy during homogenization treatments10.1007/s11661-012-1473-1 ↗
46. Quantitative study on the precipitation behavior of dispersoids in DC-cast AA3003 alloy during heating and homogenization10.1016/S1359-6454(03)00160-5 ↗
47. Solid-state intermetallic phase tranformations in 3XXX aluminium alloys10.1016/S1359-6454(02)00085-X ↗
48. Chapter one - alloying elements and dopants: phase diagrams10.1016/B978-008045370-5.50003-1 ↗