Structure and interfacial properties of η-Al5Fe2/Fe heterogeneous interface: First principles calculation and experimental research
Source abstract
Abstract
Metal/intermetallic compound heterointerfaces are ubiquitous in bimetallic materials, and their microstructures frequently determine the properties of the material. Combining transmission electron microscopy with density functional theory calculations, we investigated the interaction and bonding characteristics at Al 5 Fe 2 /Fe interfaces. It is found that the interface orientation relationships between Al 5 Fe 2 and Fe can be expressed as: Al 5 Fe 2 (1_1_2) // Fe (01_3); Al 5 Fe 2 [110] // Fe [231]. In iron-rich conditions, the AlFe2- terminated Al 5 Fe 2 (1_1_2) surface is the most stable one among the four terminations. The calculated works of adhesion and electronic structures indicate that the Fe-AlFe1-MT/HCP configuration of Al 5 Fe 2 (1_1_2)/Fe(01_3) exhibits the strongest interfacial bonding properties, with strong metal-metal interactions between the atoms. The charge density is quite large inside the atoms of the interface owing to the considerable charge transfer between them. It is localized, indicating the strong covalent interaction between atoms. Thus, the interfacial interaction can be strong, and direct metal-metal interactions can play a critical role in metal/ intermetallic compound heterointerfaces with large mismatches, opening up a new avenue for understanding the origins of interface-related issues.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Boron and Carbon Nanomaterials Research · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Investigation of Fe-rich fragments in aluminum-steel friction stir welds via simultaneous Transmission Kikuchi Diffraction and EDS10.1016/j.actamat.2016.06.064 ↗
2. Influence of aluminum casting alloys chemical composition on the interaction with a 304L stainless steel insert10.1016/j.prostr.2021.10.023 ↗
3. Interfacial microstructure evolution and mechanical properties of inertia friction welded aluminium alloy/stainless steel joint with preheat treatment10.1016/j.msea.2022.142671 ↗
4. Effects of zinc on the laser welding of an aluminum alloy and galvanized steel10.1016/j.jmatprotec.2015.04.017 ↗
5. Microstructure evolution in a martensitic 430 stainless steel–Al metallic–intermetallic laminate (MIL) composite10.1016/j.msea.2015.07.014 ↗
6. Microstructure evolution in Ni and Ni-superalloy based metallic-intermetallic laminate (MIL) composites10.1016/j.intermet.2017.04.009 ↗
7. Microstructure evolution in pure Ni and Invar-based Metallic-Intermetallic Laminate (MIL)10.1016/j.msea.2016.11.033 ↗
8. Microstructure and age hardening behavior of Al/Fe bimetal prepared by one-step compound casting10.1016/j.jallcom.2022.164170 ↗
9. Effect of heat treatment on bonding strength of aluminum/steel bimetal produced by a compound casting10.1016/j.jmatprotec.2018.04.006 ↗
10. Formation and evolution of the interfacial structure in al/steel compound castings during solidification and heat treatment10.1016/j.jallcom.2020.156685 ↗
11. On the formation and growth of intermetallic phases during interdiffusion between low-carbon steel and aluminum alloys10.1016/j.actamat.2010.11.023 ↗
12. On intermetallic phases formed during interdiffusion between aluminium alloys and stainless steel
13. Effect of Si on growth kinetics of intermetallic compounds during reaction between solid iron and molten aluminum10.1016/S1003-6326(13)62499-1 ↗
14. First-principles study of tensile and shear strength of an Fe2Al5//Fe interface10.1016/j.commatsci.2021.110319 ↗
15. First-principles simulation: ideas, illustrations and the CASTEP code10.1088/0953-8984/14/11/301 ↗
16. A.E. Mattsson, P.A. Schultz, M.P. Desjarlais, T.R. Mattsson, K. Leung, Designing meaningful density functional theory calculations in materials science, in: Proceedings of the Fourteenth APS Topical Conference on Shock Compression of Condensed Matter, 2005.10.1088/0965-0393/13/1/R01 ↗
17. Theoretical study of the phase stability and site preference for R3(Fe,T)29 (R=Nd, Sm; T=V, Ti, Cr, Cu, Nb, Mo, Ag)10.1016/S0925-8388(01)01863-1 ↗
18. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
19. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
20. Car-Parrinello molecular dynamics with Vanderbilt ultrasoft pseudopotentials10.1103/PhysRevB.47.10142 ↗
21. General methods for geometry and wave function optimization10.1021/j100203a036 ↗
22. Relaxation of crystals with the Quasi-Newton method10.1006/jcph.1996.5612 ↗
23. Effect of Si on the growth behavior of the Fe2Al5 phase at Al-xSi(liquid)/Fe(solid) interface during holding by in-situ synchrotron radiography10.1007/s11661-020-05754-9 ↗
24. Microstructural evolution and growth behavior of intermetallic compounds at the liquid Al/solid Fe interface by synchrotron X-ray radiography10.1016/j.matchar.2017.12.024 ↗
25. Kinetic interactions between solid iron and molten aluminium10.1016/S0921-5093(03)00469-6 ↗
26. Effect of joining parameters on microstructure of dissimilar metal joints between aluminum and galvanized steel10.1016/j.matdes.2014.06.026 ↗
27. Tetsu-to-Hagane, The Equilibrium Diagram of the Fe–Al–Si System, 26 (1940) 335–361.10.2355/tetsutohagane1915.26.5_335 ↗
28. Effect of silicon on the formation of intermetallic phases in aluminide coating on mild steel10.1016/j.intermet.2011.05.013 ↗
29. Energetic stabilities and the bonding mechanism of ZnO(0001)/Pd(111) interfaces
30. Chemical bonding, interface strength, and oxygen K electron-energy-loss near-edge structure of the Cu/Al2O3 interface10.1103/PhysRevB.74.235408 ↗
31. Heat capacity of η-AlFe (Fe2Al5)10.1016/j.intermet.2016.07.002 ↗
32. Thermoelastic properties of magnesiowüstite, (Mg1xFex)O: determination of the Anderson–Grüneisen parameter by time-of-flight neutron powder diffraction at simultaneous high pressures and temperatures10.1107/S0021889808025417 ↗
33. Unstrained islands with interface coincidence sites versus strained islands: X-ray measurements on Ag/ZnO10.1103/PhysRevB.72.195404 ↗
34. Effects of Ti, Si, Mg and Cu additions on interfacial properties and electronic structure of Al(111)/4H-SiC(0001) interface: a first-principles study10.1016/j.apsusc.2017.12.103 ↗
35. Adhesion strength and stability of TiB2/TiC interface in composite coatings by first principles calculation10.1016/j.commatsci.2016.11.009 ↗
36. Mechanical properties and electronic structures of Fe-Al intermetallic10.1016/j.physb.2016.10.032 ↗
37. Multi-method identification and characterization of the intermetallic surface layers of hot-dip Al-coated steel: FeAl3 or Fe4Al13 and Fe2Al5 or Fe2Al5+x10.1016/j.surfcoat.2017.05.091 ↗
38. The surface energy of metals10.1016/S0039-6028(98)00363-X ↗
39. Ab initio calculations of grain boundaries in bcc metals10.1088/0965-0393/24/3/035013 ↗
40. Morphology of Fe2Al5 particles and the interface to WC coating in the context of hot-dip galvanizing: an ab initio study10.1016/j.jallcom.2020.153854 ↗
41. Effects of RE (Nd, Ce, Y, La) on TiC(100)/Fe(110) interface based on first-principles calculations10.1016/j.vacuum.2022.111449 ↗
42. A first principles study of adhesion and electronic structure at Fe (110)/graphite (0001) interface10.1016/j.apsusc.2017.02.085 ↗
43. Strong bonding effect and Zn segregation et Al/Fe bimetallic composite interface: a first-principles study10.1557/s43578-023-01028-3 ↗
44. Strong metal–metal interaction and bonding nature in metal/oxide interfaces with large mismatches10.1016/j.actamat.2019.08.018 ↗
45. Density-functional study of Cu atoms, monolayers, and coadsorbates on polar ZnO surfaces
46. Revealing the novel fracture mechanism of the interfaces of TiB2/Fe composite from a first principles investigation10.1016/j.actamat.2018.06.040 ↗
47. Effect of the modulation ratio on the interface structure of TiAlN/TiN and TiAlN/ZrN multilayers: first-principles and experimental investigations10.1016/j.actamat.2017.03.053 ↗
48. Universal features of the equation of state of metals10.1103/PhysRevB.29.2963 ↗
49. Microalloying for ductility in molybdenum disilicide10.1016/S0921-5093(98)01060-0 ↗
50. Atomic insight into the interfacial bonding and role of carbon atoms on β-SiC(111)/Al2MgC2(0001): a first-principles study10.1016/j.apsusc.2020.145633 ↗
51. First-principles calculation on the adhesion strength, fracture mechanism, interfacial bonding of the NiTi (111)//α-Al2O3 (0001) interfaces10.1016/j.matdes.2019.108119 ↗
52. In situ SEM study on tensile fractured behavior of Al/steel laser welding-brazing interface10.1016/j.matdes.2022.111320 ↗
53. A comprehensive analysis of a pseudo-brittle fracture at the interface of intermetallic of η and steel in aluminum/steel joints made by FSW: microstructure and fracture behavior10.1016/j.msea.2021.141812 ↗
54. Bonding of immiscible Mg and Fe via a nanoscale Fe2Al5 transition layer10.1016/j.scriptamat.2011.08.026 ↗
55. Ab-initio study of atomic structure and mechanical behaviour of Al/Fe intermetallic interfaces10.1016/j.commatsci.2019.109481 ↗
56. Ab initio prediction of strong interfacial bonding in the Fe|Al bimetallic composite system10.1016/j.scriptamat.2019.10.030 ↗
57. A first-principles study of the Al (001)/Fe(0-11) Interface10.4028/www.scientific.net/MSF.941.2349 ↗
58. Revealing the epitaxial interface between Al13Fe4 and Al5Fe2 enabling atomic Al interdiffusion10.1021/acsami.2c22886 ↗
59. Dissimilar Laser Welding/Brazing of 5754 Aluminum Alloy to DP 980 Steel: mechanical properties and interfacial microstructure10.1007/s11661-015-3079-x ↗
60. Substitution behavior of Si atoms in the Ti2AlC ceramics10.1016/j.actamat.2017.11.002 ↗