journal article·2024-03

D03-ordered Fe3Al magnetic nanopowders synthesized by low oxygen induction thermal plasma

Jian Wang, Yusuke Hirayama, Zheng Liu, Shunsuke Tsurumi, Masaya Shigeta, Makoto Sugimoto, Joe Yoshikawa, Shoichi Kumon, Kimitaka Sato

Publisher page

Abstract

D0 3-ordered Fe 3 Al alloy with a large anomalous Nernst coefficient is considered as a promising candidate for a low-cost, flexible, and durable magneto-thermoelectric generator (MTG). To improve the thermoelectric performance of the more and more complex and smaller MTG modules, the incorporation of high-quality magnetic nanopowders (MNPs) is one solution. However, synthesizing fully chemically ordered MNPs without coalescence and/or oxidation with a conventional approach is challenging. In this study, we demonstrated, for the first time, D0 3-ordered (degree of ordering = 0.48) Fe 3 Al MNPs synthesized via a low oxygen thermal plasma process combined with appropriate post-annealing treatment. The resulting single crystalline MNPs are spherical in shape with a mean particle diameter of 116 ± 96 nm and exhibit a soft magnetic characteristic (saturation magnetization ≈ 112 emu/g; and coercivity ≈ 5 Oe at room temperature). The fundamental alloying mechanism during the thermal plasma process was investigated via numerical calculations, confirming that the alloying followed the route through the Fe-Al droplet. Our results will potentially aid the mass synthesis of chemical ordered MNPs for wearable energy harvesting and self-powered Internet of things applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: nanoparticles nucleation surface interactions · Advanced Thermoelectric Materials and Devices · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Anomalous Nernst effect in L1(0)-FePt/MnGa thermopiles for new thermoelectric applications10.7567/APEX.6.033003 ↗
2. Potential of thermoelectric power generation using anomalous Nernst effect in magnetic materials10.1016/j.scriptamat.2015.04.034 ↗
3. Energy-harvesting materials based on the anomalous Nernst effect10.1080/14686996.2019.1585143 ↗
4. Iron-based binary ferromagnets for transverse thermoelectric conversion10.1038/s41586-020-2230-z ↗
5. Heat flux sensing by anomalous Nernst effect in Fe-Al thin films on a flexible substrate10.35848/1882-0786/ab79fe ↗
6. Strain-induced large anomalous Nernst effect in polycrystalline Co2MnGa/AlN multilayers10.1002/aelm.202101380 ↗
7. Recent advances on 3D printing technique for thermal-related applications10.1002/adem.201700876 ↗
8. Composition-segmented BiSbTe thermoelectric generator fabricated by multimaterial 3D printing10.1016/j.nanoen.2020.105638 ↗
9. 3D printing of functional magnetic materials: from design to applications10.1002/adfm.202102777 ↗
10. Exploration of twin-modified grain boundary engineering in metallic copper predominated electromagnetic wave absorber10.1002/smll.202203620 ↗
11. Friction and wear behavior of Cu-Fe3Al powder metallurgical composites in dry sliding10.1016/S0043-1648(98)00243-9 ↗
12. Critical factors affecting the high-temperature corrosion performance of iron aluminides10.1016/S0921-5093(98)00924-1 ↗
13. Advanced intermetallic iron aluminide coatings for high temperature applications10.1016/j.pmatsci.2020.100769 ↗
14. A new approach to the synthesis of nanostructured Fe3Al alloy and aluminum doped iron oxide material10.1016/j.apt.2011.11.005 ↗
15. Synthesis of Al/Fe3Al core-shell intermetallic nanoparticles by chemical liquid deposition method10.1016/j.apt.2013.01.014 ↗
16. Characterization of Fe3Al-based intermetallic alloys fabricated by mechanical alloying and HIP consolidation10.1016/S0921-5093(00)01025-X ↗
17. Mechanical properties of in situ Fe3Al matrix composites fabricated by MA-PDS process10.1016/j.intermet.2005.10.007 ↗
18. Formation and decomposition of Do3 ordered structure in sputtered Fe-Al magnetic thin-films10.1063/1.355199 ↗
19. Cold welding behavior of fine bare aluminum powders prepared by new low oxygen induction thermal plasma system10.1016/j.jallcom.2018.07.275 ↗
20. Thermal plasmas for nanofabrication10.1088/0022-3727/44/17/174025 ↗
21. Progress of computational plasma fluid mechanics10.35848/1347-4065/acd8c2 ↗
22. Anisotropic Nd-Fe ultrafine particles with stable and metastable phases prepared by induction thermal plasma10.1016/j.jallcom.2021.159724 ↗
23. Spatial composition distribution of a Ni-Cu binary alloy powder in a thermal plasma process10.1016/j.jallcom.2021.162792 ↗
24. Growth model of binary alloy nanopowders for thermal plasma synthesis10.1063/1.3464228 ↗
25. Effect of precursor fraction on suicide nanopowder growth under thermal plasma conditions: a computational study10.1016/j.powtec.2015.11.005 ↗
26. Effect of saturation pressure difference on metal-silicide nanopowder formation in thermal plasma fabrication10.3390/nano6030043 ↗
27. Two-directional nodal model for Co-condensation growth of multicomponent nanoparticles in thermal plasma processing10.1007/s11666-009-9316-3 ↗
28. Growth mechanism of silicon-based functional nanoparticles fabricated by inductively coupled thermal plasmas10.1088/0022-3727/40/8/S20 ↗
29. Computational study of quenching effects on growth processes and size distributions of silicon nanoparticles at a thermal plasma tail10.3390/nano11061370 ↗
30. Mechanical and thermal properties of metallic and semiconductive nanostructures10.1021/jp077371n ↗
31. T.B. Massalski, H. Okamoto, P.R. Subramanian, L. Kacprzak, Binary Alloy Phase Diagrams, 2nd ed., ASM International, Materials Park, OH, 1990.
32. P. Villars, Pearson's handbook: crystallographic data for intermetallic phases, ASM International, Materials Park, OH, 1997.
33. Order-disorder transformation in Fe-Al alloys10.2320/matertrans1960.8.174 ↗
34. An X-ray diffraction study of kinetic behaviors of ordering in Fe3Al alloy10.2320/matertrans1960.14.8 ↗
35. Interpretation of Fe-rich part of Fe-Al phase diagram from magnetic properties of A2-, B2-, and DO3-phases10.1016/j.jallcom.2020.155140 ↗
36. Vapor pressure data for the solid and liquid elements
37. Anisotropic Sm-Co nanopowder prepared by induction thermal plasma10.1016/j.jallcom.2021.160633 ↗