journal article·2023-12

Crystalline and amorphous microstructure evolution of Zr-Cu-Al ternary alloys solidified in drop tube

Gexin Li, Pengchao Zhang, Jian Chang, Haipeng Wang

Publisher page

Abstract

High undercooling rapid solidification process has a significant impact on the solidified microstructure and mechanical properties of materials. In this study, particles with a diameter range between 100 and 1100 µm of ternary Zr 50Cu 40Al 10 and Zr 49Cu 46Al 5 alloys were prepared by a drop tube. The evolution process of particle-solidified microstructure with decreasing particle diameter was analyzed using XRD, SEM, and TEM. For Zr 50Cu 40Al 10 alloy, the solidified microstructure in the particle diameter ranges of 200–1100 µm is composed of an amorphous phase and a primary B2-ZrCu high-temperature metastable phase. As the particle diameter reduces, the retained crystalline phase in the solidified microstructure decreases progressively, and the dendrite grain length gradually becomes finer. When the particle diameter is reduced to below 200 µm, the crystalline phase has completely disappeared, and the solidified microstructure evolves into a completely amorphous structure. For Zr 49Cu 46Al 5 alloy, in the particle diameter range of 400–1100 µm, the solidified microstructure consists of primary B19`-ZrCu phase, a small amount of Cu 10Zr 7 phase and Zr 14Cu 51 phase. As the particle diameter reduces, a grain refinement phenomenon also occurs in the solidified microstructure and the dendritic morphology changes from equiaxed grain to rod-shaped dendrite. The amorphous phase appears when the particle diameter is lowered to 470 µm and solidified microstructure evolves into a completely amorphous structure as the particle diameter is reduced to 146 µm. The nanoindentation results show that the micromechanical properties of amorphous composite microstructures are superior to the single component composition of crystalline or amorphous phase for Zr 50Cu 40Al 10 and Zr 49Cu 46Al 5 alloys. The reinforcement effect on the amorphous phase is related to the content of the second crystalline phase. Moreover, under similar particle diameters, the mechanical properties of Zr 50Cu 40Al 10 particles are always better than those of Zr 49Cu 46Al 5 particles.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. The rapid solidification processing of materials: science, principles, technology, advances, and applications10.1007/s10853-009-3995-5 ↗
2. Remelting of primary solid in rapid solidification of deeply undercooled alloy melts
3. Non-crystalline structure in solidified gold-silicon alloys10.1038/187869b0 ↗
4. Explore space using swarms of tiny satellites10.1038/d41586-018-06957-2 ↗
5. Numerical simulation of InGaSb crystal growth by temperature gradient method under normal- and micro-gravity fields10.1016/j.jcrysgro.2013.04.061 ↗
6. Transition from crystal to metallic glass and micromechanical property change of Fe-B-Si alloy during rapid solidification10.1007/s11663-019-01748-0 ↗
7. Metastable solidification of NdFeB alloys by drop-tube processing10.1557/JMR.2001.0351 ↗
8. CONTAINERLESS UNDERCOOLING AND SOLIDIFICATION IN DROP TUBES10.1016/0022-0248(81)90007-5 ↗
9. Combined effects of high undercooling and large cooling rate on the microstructure evolution and hardening mechanism of rapidly solidified Ti-Al alloys10.1007/s11661-019-05616-z ↗
10. Droplet undercooling during containerless processing in a drop tube10.1088/0256-307X/21/6/040 ↗
11. Coupling effect of undercooling and cooling on Ti-Al-V alloy solidification
12. Phase selection and microstructure evolution within eutectic Ti-Si alloy solidified at containerless state10.1007/s11431-021-1992-1 ↗
13. Phase selection and characterization of Fe-based multi-component amorphous composite
14. Role of alloying additions in glass formation and properties of bulk metallic glasses10.3390/ma3125320 ↗
15. Formation, stability and structure of palladium-silicon based alloy glasses10.1016/0001-6160(69)90048-0 ↗
16. High-strength Cu-based bulk glassy alloys in Cu-Zr-Ti and Cu-Hf-Ti ternary systems10.1016/S1359-6454(01)00181-1 ↗
17. Preparation of bulky amorphous Zr-Al-Co-Ni-Cu alloys by copper mold casting and their thermal and mechanical-properties10.2320/matertrans1989.36.391 ↗
18. Glass-forming ability for Mg-Cu-Nd alloys10.1007/s11661-007-9287-2 ↗
19. Structure and properties of high strength and ductile Ti-Fe-Cu-Nb-Sn alloys10.1016/j.msea.2008.06.020 ↗
20. Bulk formation of a metallic-glass - PD-40 NI-40-P-2010.1063/1.93645 ↗
21. Formation of bulk metallic-glass by fluxing10.1063/1.95330 ↗
22. Effects of annealing and changes in stress state on fracture toughness of bulk metallic glass10.2320/matertrans.42.633 ↗
23. Microstructure and mechanical properties of Zr-Cu-Al bulk metallic glasses10.1016/S1003-6326(07)60202-7 ↗
24. Multiple maxima of GFA in three adjacent eutectics in Zr–Cu–Al alloy system – A metallographic way to pinpoint the best glass forming alloys10.1016/j.actamat.2005.03.012 ↗
25. Plasticity-improved Zr–Cu–Al bulk metallic glass matrix composites containing martensite phase
26. Nanocrystalline Zr-based bulk glassy alloys with high flexural strength10.2320/matertrans1989.40.1015 ↗
27. In situ formed (CU0.6Zr0.25Ti0.15)(93)Nb-7 bulk metallic glass composites10.2320/matertrans.45.2346 ↗
28. Volume and viscosity of Zr-Cu-Al glass-forming liquid alloys10.1016/j.jnoncrysol.2008.11.013 ↗
29. High-pressure annealing driven nanocrystal formation in Zr50Cu40Al10 metallic glass and strength increase10.1038/s43246-020-00057-3 ↗
30. Unraveling the microstructural heterogeneity and plasticity of Zr50Cu40Al10 bulk metallic glass by nanoindentation10.1016/j.ijplas.2022.103305 ↗
31. Influence of in situ synthesized TiC on thermal stability and corrosion behavior of Zr60Cu10Al15Ni15 amorphous composites10.1016/j.physb.2013.11.039 ↗
32. Improvement in wear resistance of laser-clad Fe-Cr-Mo-B-C-(TiC) amorphous-nanocrystalline coating10.1016/j.vacuum.2022.111676 ↗
33. In situ mechanical crystallization of amorphous alloys
34. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
35. On the generality of the relationship among contact stiffness, contact area, and elastic-modulus during indentation10.1557/JMR.1992.0613 ↗
36. Modeling of droplet dynamic and thermal histories during spray forming.1. Individual droplet behavior10.1016/0956-7151(93)90039-U ↗
37. Solidification progress and heat-transfer analysis of gas-atomized alloy droplets during spray forming10.1016/0956-7151(94)90421-9 ↗
38. Heat transfer of micro-droplet during free fall in drop tube10.1007/s11431-018-9240-x ↗
39. Reassessment of the binary aluminum-titanium phase diagram10.1361/154770306X109809 ↗
40. Perspective on the glass transition10.1016/0022-3697(88)90002-9 ↗
41. Thermodynamics and kinetics of bulk metallic glass10.1557/mrs2007.122 ↗
42. S. Pauly, 2010. Phase formation and mechanical properties of metastable Cu-Zr-based alloys, (2010).
43. Microscopic mechanism for steady-state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
44. Plastic-deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗